18 questions on the standard circle theorems, each asking for the answer and the reason — as the exam does.
⭕ Circle theorems practice
Circle theorems are Higher tier only, and they are marked as much on the reason as on the number. This sheet asks for both, every time. It covers the angle at the centre being twice the angle at the circumference, the angle in a semicircle, angles in the same segment, opposite angles of a cyclic quadrilateral summing to 180°, the tangent meeting the radius at a right angle, the two tangents from a point being equal, the perpendicular from the centre bisecting a chord, and the alternate segment theorem. The later questions chain two theorems together, which is how they usually arrive on a paper. Write the theorem out in words rather than pointing at the diagram — 'angles in the same segment are equal' is the phrase that earns the mark, and it is the phrase that is easiest to leave out under time pressure.
- 1.A circle has centre O and radius 13 cm. AB is a chord of the circle, and M is the midpoint of AB. OM is drawn, and OM = 5 cm. Work out the length of AB.
- 2.A chord divides a circle into two segments of different sizes. Write down the name given to the smaller of the two segments.
- 3.A straight line crosses a pair of parallel lines. One of the co-interior (allied) angles is 118°. Work out the size of the other co-interior angle.
- 4.A straight line touches the edge of a circle at exactly one point and does not cross into the circle at all. Write down the term for this line.
- 5.A tangent to a circle with centre O touches the circle at point P, where OP = 5 cm. Point Q lies on the tangent so that PQ = 12 cm. Using the fact that a tangent is perpendicular to the radius at the point of contact, work out the length OQ.
- 6.A roof truss has two horizontal parallel rafters, one above the other. A straight strut crosses both rafters. Where the strut crosses the lower rafter, the angle above the rafter and to the left of the strut is 65°. Work out the size of the angle above the upper rafter and to the right of the strut, where the strut crosses it.
- 7.ABCD is a cyclic quadrilateral, with its vertices in that order around the circle. Angle DAB = 108°. Work out the size of angle BCD.
- 8.A, B, C and D are points on a circle, and ABCD is a cyclic quadrilateral with the vertices in that order around the circle. Angle ABC = 108° and angle ADC = 72°. Which circle theorem is the reason that angle ABC + angle ADC = 180°?
- 9.A chord divides a circle into two regions, one larger than the other. Write down the term used for the smaller of these two regions.
- 10.A tangent touches a circle with centre O at the point P. Q is a point on the tangent. Write down the circle fact that tells you the size of angle OPQ.
- 11.A regular polygon has 12 sides. Work out the size of one exterior angle of the polygon.
- 12.At a cycling event, a circular track has centre O. Two flags, F and M, are fixed on the track. A course marker P is also on the track, positioned so that angle FOP = 55° and angle POM = 43°, with P between F and M as seen from O. A spectator S stands on the major arc FM, on the opposite side of the track from P. The event programme needs angle FSM. Work out angle FSM.
- 13.Two points on a circle divide its circumference into two arcs of different lengths. Write down the name given to the shorter of the two arcs.
- 14.A trundle wheel has a diameter of 0.5 m. It is rolled along the ground and makes 20 complete turns. Using π = 3.14, work out the total distance rolled, in metres.
- 15.ABCD is a cyclic quadrilateral, with its vertices in that order around the circle. Angle DAB = (2x + 10)° and angle DCB = (3x − 5)°. Work out the size of angle DAB.
- 16.In one circle, chord PQ is 6 cm long, chord RS is 10 cm long, chord TU is 14 cm long and chord VW is 15 cm long. Write down which of these chords lies closest to the centre of the circle.
- 17.In cyclic quadrilateral ABCD, with vertices in that order around the circle, the diagonal BD is drawn. In triangle ABD, angle ABD = 35° and angle ADB = 65°. Side DC is extended beyond C to a point E. Work out the size of angle BCE.
- 18.A straight line crosses two parallel lines. One of the angles formed is (2x + 10)°, and the angle alternate to it is 74°. Work out the value of x.
Answer key
- (a) 24 cm — The line from the centre to the midpoint of a chord is perpendicular to the chord, so triangle OMA has a right angle at M. By Pythagoras' theorem, AM² = OA² − OM² = 169 − 25 = 144, so AM = 12 cm. AB is twice AM, since M is the midpoint: AB = 2 × 12 = 24 cm. Finding AM = 12 cm correctly but forgetting to double it for the full chord gives 12 cm. Working out 169 − 25 = 144 and forgetting to take the square root gives 144 cm. Subtracting first and then doubling the wrong way, (13 − 5) × 2, gives 16 cm. Doubling AM after finding it correctly is the step that's missing from all three — do it, and you get 24 cm.
- (b) Minor segment — Method: compare the sizes of the two regions cut off by the chord, and recall the term used for the smaller one. Working: the chord creates two segments; the smaller region is called the minor segment and the larger one the major segment. A student who answers major segment has picked the larger region by mistake instead of the smaller one. A student who answers minor arc has named the curved boundary rather than the two-dimensional region it encloses. A student who answers semicircle has wrongly assumed the chord must pass through the centre. Answer: minor segment.
- (b) 62 — Method: co-interior (allied) angles between parallel lines add up to 180°. Working: 180 − 118 = 62. Answer: 62°. A candidate who treats co-interior angles as equal, like corresponding angles, gives 118. A candidate who uses 360° instead of 180°, working out 360 − 118, gets 242. A candidate who subtracts as if the angles were complementary, working out 118 − 90, gets 28.
- (d) tangent — A line that touches a circle at exactly one point, without crossing into the circle, is called a tangent. A chord is a straight line joining two points ON the circle, so it touches at two points, not one. A radius runs from the centre to the circle's edge, not along the outside of it. A diameter is a chord that passes through the centre, also touching the circle at two points.
- (d) 13 — Method: OP and PQ meet at a right angle because of the tangent–radius fact, so triangle OPQ is right-angled at P; use Pythagoras' theorem. Working: OQ² = OP² + PQ² = 5² + 12² = 25 + 144 = 169; OQ = √169 = 13. A student who answers 17 has simply added the two given lengths (5 + 12) instead of using Pythagoras' theorem. A student who answers 7 has subtracted the two given lengths (12 − 5) instead of using Pythagoras' theorem. A student who answers 144 has correctly squared 12 but stopped there, forgetting to add 5² and take the square root. Answer: 13 cm.
- (c) 115 — Method: use corresponding angles to carry the 65° angle from the lower rafter up to the upper rafter, then use angles on a straight line to move to the other side of the strut. Working: the angle above the upper rafter and to the left of the strut corresponds to the given angle, so it is 65°; the angle above the upper rafter and to the right of the strut lies on a straight line with it, so it is 180 − 65 = 115. Answer: 115°. A candidate who assumes the angle stays 65° without allowing for the move from the left of the strut to the right of it gives 65. A candidate who uses 90° instead of 180°, working out 90 − 65, gets 25. A candidate who adds instead of subtracting, working out 180 + 65, gets 245.
- (c) 72° — Method: opposite angles in a cyclic quadrilateral always sum to 180°. Working: angle DAB and angle BCD are opposite angles of the cyclic quadrilateral ABCD, so angle BCD = 180 − 108 = 72 degrees. Answer: 72°. Opposite angles in a cyclic quadrilateral are SUPPLEMENTARY, not equal, so do not simply copy the given angle; and do not subtract from 360°, which is the rule for angles round a point, or confuse this with the angle-in-a-semicircle theorem, which gives a fixed 90° that has nothing to do with this quadrilateral.
- (d) Opposite angles in a cyclic quadrilateral sum to 180° — ABCD is a cyclic quadrilateral, and angle ABC and angle ADC are a pair of opposite angles in it — they don't sit next to each other around the quadrilateral. The theorem that fixes the sum of a cyclic quadrilateral's opposite angles at 180° is exactly the one needed here. The other three theorems don't apply to this figure at all: the angle-in-a-semicircle theorem gives a 90° angle only when one side is a diameter, and no diameter is mentioned; the angle-at-the-centre theorem needs a centre point and an inscribed angle on the same arc, and no centre is given here; the tangent–radius theorem gives a 90° angle only where a tangent line touches the circle, and there is no tangent in this figure. Only the cyclic-quadrilateral theorem fits what is actually drawn.
- (c) minor segment — A chord splits a circle into two segments; the smaller of the two is called the minor segment and the larger one the major segment. "major segment" names the larger region, the opposite of what is asked for. "sector" is a different region altogether, enclosed by two radii and an arc, not by a chord. "arc" is a curved length along the circumference, not an enclosed region at all.
- (d) The angle between a tangent and a radius is 90° — OP is the radius drawn to the point of contact P, and a circle theorem states that a tangent always meets that radius at a right angle, so angle OPQ = 90°. A tangent is not parallel to the radius it touches — at the point of contact it is perpendicular to that radius, not parallel to it. A tangent does not pass through the centre — a straight line through the centre that also touches the circle at one point would have to be a diameter, which is a different line entirely. The angle-in-a-semicircle theorem needs a triangle drawn inside the circle with a diameter as its longest side; there is no such triangle here, just a tangent and a radius.
- (a) 30° — Method: the exterior angles of any convex polygon add up to 360°, and in a regular polygon they are all equal, so divide 360° by the number of sides. Working: 360 ÷ 12 = 30. Answer: 30°. The distractors: 150° is the interior angle, 180 − 30, which answers for the wrong angle at the vertex; 15° comes from dividing 180 by 12, using the angles on a straight line instead of the full turn; 36° comes from dividing 360 by 12 − 2 = 10, carrying the subtraction of 2 out of the interior angle sum formula into a calculation that does not need it.
- (d) 49° — Method: first combine the two given angles at the centre to find the whole central angle FOM, then apply the angle-at-the-centre theorem, which halves the central angle to give the angle at the circumference on the major arc. Working: angle FOM = angle FOP + angle POM = 55 + 43 = 98 degrees. Since S is on the major arc FM, angle FSM = 98 ÷ 2 = 49 degrees. Answer: 49°. Add BOTH given angles to find the whole angle FOM before you halve anything: halving only one of them, doubling the total instead of halving it, or subtracting from 180° all give the wrong angle for the programme.
- (d) Minor arc — Method: compare the lengths of the two arcs formed by the two points, and recall the term for the shorter one. Working: the two points split the circumference into two arcs; the shorter one is the minor arc and the longer one is the major arc. A student who answers major arc has picked the longer arc by mistake. A student who answers minor segment has confused the curved boundary with the enclosed two-dimensional region. A student who answers chord has named the straight line joining the two points instead of the curved arc. Answer: minor arc.
- (a) 31.4 — Method: first find the circumference of one turn using π × diameter, then multiply by the number of turns. Working: circumference = 3.14 × 0.5 = 1.57 m; total distance = 1.57 × 20 = 31.4 m. A student who answers 15.7 has mistakenly halved the diameter again before multiplying, using 0.25 m instead of 0.5 m. A student who answers 3.14 has simply written down π itself, without completing the circumference or multiplying by the number of turns. A student who answers 62.8 has mistakenly doubled the diameter to 1 m before multiplying, treating the given length as a radius. Answer: 31.4 m.
- (b) 80° — Method: opposite angles of a cyclic quadrilateral sum to 180°, so form and solve an equation for x, then substitute back to find angle DAB. Working: (2x + 10) + (3x − 5) = 180, so 5x + 5 = 180, x = 35, and angle DAB = 2(35) + 10 = 80°. Using 360° instead of 180° as the total (as if the two angles were the whole circle rather than a pair of opposite angles) gives x = 71 and angle DAB = 152°; solving correctly for x but reporting x itself instead of substituting it back into 2x + 10 gives 35°; and mishandling the signs when combining the two expressions, using (2x + 10) + (3x + 5) = 180 instead of (2x + 10) + (3x − 5) = 180, gives x = 33 and angle DAB = 76°. Opposite angles of a cyclic quadrilateral — not adjacent ones — are the pair that sums to 180°.
- (c) VW — Method: within one circle a chord's distance from the centre is fixed by its length, because a chord passing nearer the centre cuts further across the circle; so the chord that lies closest to the centre is simply the longest one listed. Working: the four lengths are 6 cm, 10 cm, 14 cm and 15 cm. Placing them in order, the greatest is 15 cm, and that length belongs to VW, so VW lies closest to the centre. Answer: VW. The distractors: PQ comes from reversing the rule and taking the shortest chord to be the one tucked nearest the centre; TU comes from knowing that the very longest chord is a diameter, deciding that such a chord passes through the centre rather than lying close to it, ruling the 15 cm chord out on that ground and taking the next longest; RS comes from reading 'closest to the centre' as 'nearest the middle of the list of lengths' and picking a middling value.
- (a) 80° — In triangle ABD, the three angles sum to 180°: angle BAD = 180° − 35° − 65° = 80°. ABCD is a cyclic quadrilateral, so the exterior angle at C, angle BCE, is equal to the interior angle at the opposite vertex, angle BAD: angle BCE = 80°. Adding the two given angles in triangle ABD instead of subtracting them from 180°, 35° + 65° = 100°, and then applying the exterior-angle rule correctly still gives the wrong angle BAD and so the wrong exterior angle, 100°. Halving the correct angle BAD, 80° ÷ 2 = 40°, confuses the exterior-angle rule with a different circle theorem in which one angle is half of another. Doubling it instead, 80° × 2 = 160°, makes the same kind of confusion in the other direction.
- (c) 32 — Method: alternate angles between parallel lines are equal, so 2x + 10 = 74. Working: subtracting 10 from both sides gives 2x = 64; dividing by 2 gives x = 32. Answer: x = 32. A candidate who forgets to subtract 10 first and divides 74 by 2 directly gets 37. A candidate who treats the angles as co-interior instead of alternate, so that the two expressions add to 180° rather than being equal, gets 48 after solving. A candidate who makes a sign error and treats the equation as 2x equalling 10 minus 74 instead of 74 minus 10 gets −32.
What is on this worksheet?
The sheet holds 18 questions drawn from the MathsUK bank — the content area covered: Geometry and measures (statements G10, G9, G3). It is pitched at GCSE Higher and takes about 40 minutes to work through in full. It is built for independent practice, with full answers at the end for self-marking.
How to use the sheet well
- Print it or open it on screen — both work. Printing is A4; the screen view fits phones and tablets.
- Do all 18 questions before checking — about 40 minutes is the guide, but there is no time pressure.
- Check the answers — press “Show answers” or print the answer page separately.
- Redo the questions you got wrong — twice as effective as doing 18 fresh ones.
- “New questions” — builds a fresh sheet on the same statements, so you can practise again without repeats.
Why this sheet helps
MathsUK worksheets use questions graded by difficulty and a fair spread of correct-answer positions (the answer is not always (a)) — so the student really has to think about each question rather than guess a pattern. Every question is tagged to a DfE content statement and checked before it enters the bank. The answers come with a step-by-step explanation, not just a value — so a wrong answer becomes a lesson.
Similar worksheets worth a look
- 🧮 Paper 1 non-calculator warm-up — Higher · 20 questions · ~25 min
- 📈 Quadratics: factorise, complete the square, formula · 24 questions · ~45 min
- ⚗️ Ratio and proportion mastery — Higher · 24 questions · ~45 min
- 🔺 Higher stretch — grade 8 and 9 topics · 18 questions · ~50 min