🎯 Grade 4 pass booster

Answer key

1. (a) 1/10 — There are 4 × 5 = 20 equally likely outcomes in total. The pairs whose product is 12 are Spinner A showing 3 with Spinner B showing 4, and Spinner A showing 4 with Spinner B showing 3, which is 2 outcomes, giving a probability of 2/20 = 1/10. Choosing 1/20 comes from finding only one of the two pairs, (3, 4), and missing (4, 3) as a separate outcome. Choosing 1/8 comes from using 16 as the total number of outcomes, 4 × 4, forgetting that Spinner B has 5 sections rather than 4. Choosing 1/5 comes from listing the factor pairs of 12 as 2 × 6 and 3 × 4 and counting each one in both orders, (2, 6), (6, 2), (3, 4) and (4, 3), giving 4 outcomes out of 20 without checking that neither spinner has a 6 on it.
2. (a) 62.5 — Method: a mean cannot be averaged with a new value — rebuild the total, add the new value to it, then divide by the new count. Working: three numbers with a mean of 50 have a total of 50 × 3 = 150; adding 100 makes the total 150 + 100 = 250; there are now 4 numbers, so the new mean is 250 ÷ 4 = 62.5. Answer: 62.5. The distractors: 75 comes from averaging the old mean with the new value, (50 + 100) ÷ 2, which ignores that three numbers pull against one; 50 comes from assuming an extra value leaves the mean unchanged; 37.5 comes from dividing the old total of 150 by the new count of 4, adding the new value to the count but not to the total.
3. (a) 16 — Method: keep the two rolls in order, first roll then second roll, and count every ordered pair the dice can land on, so a (2, 3) result is counted separately from a (3, 2) result. Working: the first roll can land on any of 4 numbers, and for each of those the second roll can also land on any of 4 numbers, giving 4 × 4 = 16 ordered pairs. Answer: 16. Watch out: writing down 8 comes from adding the two rolls' counts, 4 + 4, instead of multiplying them. Writing down 10 comes from listing unordered pairs, so (2, 3) and (3, 2) are counted as the same entry — that gives the 4 doubles plus 6 mixed pairs, 10 in total, instead of 16 ordered pairs. And writing down 4 comes from counting only one roll's outcomes and never pairing the two rolls together at all.
4. (c) £672 — Simple interest per year = 3% of £600 = £18. Over 4 years the interest is 18 × 4 = £72. Total in the account = £600 + £72 = £672. A student who gives just the interest, without adding it to the principal, writes £72. A student who adds only one year's interest instead of four gets £600 + £18 = £618. A student who wrongly compounds the interest each year gets 600 × 1.03⁴ = £675.31.
5. (c) 20% — Method: percentage increase = (increase ÷ original) × 100. Working: the increase is 54 − 45 = 9, and 9 ÷ 45 = 0.2, so the percentage increase is 0.2 × 100 = 20. Answer: 20%. The distractors: 9% comes from writing the actual increase as a percentage; 16.7% comes from dividing by the new value 54 instead of the original 45; 120% is the multiplier 1.2 written as a change rather than the change itself.
6. (b) 25 cm² — Method: a square has four equal sides, so divide the perimeter by 4 to recover the side length, then square that side to get the area. Working: 20 ÷ 4 = 5 cm, then 5 × 5 = 25. Answer: 25 cm². The distractors: 400 cm² comes from squaring the perimeter itself, 20 × 20, treating the 20 cm as though it were the side length; 100 cm² comes from dividing the perimeter by 2 rather than by 4, giving a side of 10 cm, and squaring that; 5 cm is the side length, from stopping as soon as the perimeter has been divided by 4 and never squaring it, which also leaves a length where an area was asked for.
7. (d) £200 — Method: add the parts of the ratio, divide the total paid by the number of parts to find the value of one part, then multiply by the parts in the most expensive item. Working: 2 + 3 + 5 = 10 parts, £400 ÷ 10 = £40 for one part, and the most expensive item is 5 parts, so 5 × £40 = £200. Answer: £200. The distractors: £40 is the value of one part; £80 is the 2-part item, the cheapest of the three; £120 is the 3-part item.
8. (b) 55° — Method: complementary angles are a pair that add up to 90°, so subtract the known angle from 90°. Working: 90 − 35 = 55. Answer: 55°. The distractors: 145° comes from subtracting from 180°, which is the rule for supplementary angles and not for complementary ones; 325° comes from subtracting from 360°, the total of the angles at a point; 90° is the total that the pair must make, written down in place of the missing angle.
9. (b) 4% — Method: find the total interest earned, share it equally across the number of years to find one year's interest, then write it as a percentage of the amount invested. Working: total interest = £840 − £750 = £90, so one year's interest is £90 ÷ 3 = £30, and £30 as a percentage of £750 is (£30 ÷ £750) × 100 = 4%. Answer: 4%. 12% comes from treating the total interest of £90 as if it were earned in a single year, (£90 ÷ £750) × 100 = 12%, forgetting to divide by 3 years. 0.04% comes from finding the correct decimal, £30 ÷ £750 = 0.04, but forgetting to multiply by 100 to convert it into a percentage. 112% comes from writing the final amount, £840, as a percentage of the amount invested, £750, without first subtracting the £750 to find the interest alone.
10. (a) 96 cm² — Method: a cube has six identical square faces, so the total surface area is six times the area of one face. Working: one face has area 4 × 4 = 16 cm², and 6 × 16 = 96. Answer: 96 cm². The distractors: 16 cm² is the area of a single face, from stopping before multiplying by the six faces; 64 cm³ comes from working out the volume, 4 × 4 × 4, which is a different measure and carries a different unit; 24 cm² comes from multiplying the six faces by the edge length, 6 × 4, instead of by the area of a face.
11. (b) 1/6 — Method: list the ordered pairs where the two scores match, and divide by the 36 equally likely pairs. Working: the matching pairs are (1, 1), (2, 2), (3, 3), (4, 4), (5, 5) and (6, 6), which is 6 pairs out of 36, cancelling down to 1/6. Answer: 1/6. Watch out: writing down 1/36 finds the probability of one particular double, such as (6, 6), rather than any double at all. Guessing 1/2 treats 'same' and 'different' as equally likely events, when there are only 6 matching pairs against 30 non-matching ones. And writing down 1/3 comes from listing each double twice, once for each order of the two dice, giving 12 pairs out of 36 — but (1, 1) is a single outcome, and swapping the two dice over does not produce a second one.
12. (c) 10 — There are 5 possible cards and 2 possible coin results, so listing every pair gives 5 × 2 = 10 equally likely outcomes. Choosing 5 comes from listing only the card outcomes and forgetting the coin flip adds a second stage to each one. Choosing 7 comes from adding the two stages instead of combining them, 5 + 2 = 7, rather than pairing every card with every coin result. Choosing 20 comes from counting each coin result twice for every card, 5 × 2 × 2 = 20, effectively pairing every card with the coin twice over.
13. (b) 12 — The difference between the parts of the ratio is 5 − 2 = 3 parts, and this is worth 18. Divide to find one part: 18 ÷ 3 = 6. Cats have 2 parts: 2 × 6 = 12. (30 is the number of dogs, using 5 parts instead of 2. 6 is the value of one part — the number of cats is 2 lots of this, not just one. 9 comes from dividing 18 by 2 and stopping there, instead of dividing by the difference in parts, 3, and then multiplying by 2.)
14. (a) 20% — Method: a percentage is a number of parts per hundred, so divide the numerator by the denominator and multiply by 100. Working: 1 ÷ 5 = 0.2, and 0.2 × 100 = 20; the same result comes from scaling 1/5 to 20/100. Answer: 20%. The distractors: 5% comes from reading the denominator 5 straight off as the percentage; 25% comes from confusing 1/5 with 1/4, the fraction met most often in percentage work; 50% comes from a place value slip in the division, writing 1 ÷ 5 as 0.5 instead of 0.2.
15. (a) 5/36 — Method: list every result of the two dice as an ordered pair, first score then second score, count the pairs that give the total asked for and divide by how many pairs the list holds. Working: each dice can show 6 scores, so there are 6 × 6 = 36 equally likely ordered pairs. The pairs whose scores add to 6 are (1, 5), (2, 4), (3, 3), (4, 2) and (5, 1), which is 5 pairs out of the 36. Answer: the probability is 5/36. The distractors: 4/36 comes from listing (1, 5), (5, 1), (2, 4) and (4, 2) and leaving (3, 3) out, because a double does not look like a pair that can be turned round; 5/12 comes from finding the 5 pairs but taking the number of possible results to be 6 + 6 = 12, adding the two dice instead of multiplying them; 1/11 comes from treating the eleven possible totals 2, 3, 4 and so on up to 12 as equally likely, so that a total of 6 is one result out of eleven.
16. (b) 1/4 — There are 6 × 2 = 12 equally likely outcomes. The even-numbered cards are 2, 4 and 6, so there are 3 × 1 = 3 outcomes with an even card and tails, giving a probability of 3/12 = 1/4. Choosing 1/2 comes from working out only the probability of drawing an even card, 3/6, and forgetting to combine it with the coin landing on tails. Choosing 1/12 comes from treating only one specific outcome, such as card 6 with tails, as the only one that counts, instead of all three even cards paired with tails. Choosing 1/8 comes from doubling the coin stage when counting the total, using 6 × 2 × 2 = 24 outcomes instead of 6 × 2 = 12, and giving 3/24 = 1/8.
17. (b) 1/6 — There are 2 outcomes for the coin and 3 outcomes for the spinner, giving 2 × 3 = 6 equally likely pairs: (H,X), (H,Y), (H,Z), (T,X), (T,Y), (T,Z). Only one of these, (H,Z), matches both conditions, so the probability is 1/6. A candidate who answers 1/3 has listed only the spinner's 3 outcomes and ignored the coin. A candidate who answers 1/2 has considered only the coin and ignored the spinner. A candidate who answers 1/5 has missed one pair when listing the possibility space, treating it as 5 outcomes instead of 6.
18. (a) 20% — Method: percentage increase = increase ÷ original amount × 100. Working: the increase is 84 − 70 = 14 marks, and 14 ÷ 70 = 0.2, so 0.2 × 100 = 20. Answer: an increase of 20%. The distractors: 14% comes from quoting the 14 mark increase as though marks and per cent were the same thing; 17% comes from dividing the 14 by the new mean 84 instead of by the original 70, which gives 17% to the nearest per cent; 120% is the new mean written as a percentage of the old one, which is the whole of the new mean rather than the increase.
19. (c) The mean, because every value counts towards it, so 100 pulls it from 7 up to about 20.3. — Method: work each measure out before the extra value is added and again afterwards, then compare the size of the two changes. Working: before, the six values total 42, so the mean is 42 ÷ 6 = 7, and the middle pair 6 and 8 give a median of (6 + 8) ÷ 2 = 7; after, the seven values total 142, so the mean is 142 ÷ 7 = 20.29 to 2 decimal places, while the median is now the 4th of the seven ordered values, which is 8; the mean has moved by about 13.3 and the median by 1. Answer: the mean, because every value counts towards it, so 100 pulls it from 7 up to about 20.3 — this is why the median is often preferred when a data set contains an outlier. The distractors: the reply that the mean rises by 100 adds the extra value to the mean instead of adding it to the total; the reply that the median moves to 12 takes the largest of the original values as the new middle instead of counting to the 4th of the seven values; the reply about even and odd counts quotes a rule that does not exist, since the median moved because a very large value was added, not because the count of values changed.
20. (a) 8,000,000 cm³ — Method: change the edge length into centimetres first and then cube it, because 1 m = 100 cm and a volume needs that conversion applied to all three dimensions. Working: 2 m = 2 × 100 = 200 cm, so the volume is 200 × 200 × 200. 200 × 200 = 40,000 and 40,000 × 200 = 8,000,000. Answer: 8,000,000 cm³. The distractors: 8,000 cm³ comes from converting 2 m to 20 cm and cubing that; 80,000 cm³ comes from cubing in metres to get 8 m³ and then multiplying by 10,000, the conversion factor for an area rather than the 1,000,000 a volume needs; 8 cm³ comes from cubing the 2 without converting at all and simply writing cm³ because the question asked for that unit.
21. (c) 21% — Method: an increase of 10% is a multiplier of 1.1, and two successive increases are found by multiplying the multipliers. Working: 1.1 × 1.1 = 1.21, so the rent is 121% of the original, which is an increase of 21%. Answer: 21%. The distractors: 20% comes from adding the two percentages, which ignores that the second 10% is taken of a larger amount; 121% is the multiplier written as the change rather than the change itself; 11% comes from slipping in the multiplication and getting 1.11 instead of 1.21.
22. (c) 4 — Method: subtract 3 from both sides, then divide by 4. Working: 4x = 19 − 3 = 16, so x = 16 ÷ 4 = 4. Answer: 4. 4.75 comes from dividing 19 by 4 directly, without subtracting 3 first. 3.75 comes from subtracting 4 instead of 3 before dividing. 5.5 comes from a sign error, adding 3 to 19 instead of subtracting it.
23. (b) 47 — Method: angles on a straight line add up to 180°. Working: 180 − 38 − 95 = 47. Answer: x = 47. A candidate who uses 360° instead of 180° gets 227. A candidate who subtracts only one of the two given angles from 180° gets 142. A candidate who adds the two given angles instead of subtracting them from 180° gets 133.
24. (a) 1.5 — Method: with an even number of values the median is the mean of the two middle values, which for 12 values are the 6th and the 7th once the data are in order. Working: the results are already in order, and 12 ÷ 2 = 6, so the middle pair are the 6th value, 1, and the 7th value, 2; the median is (1 + 2) ÷ 2 = 1.5. Answer: 1.5 brothers and sisters. The distractors: 1 comes from reading the 6th value and stopping there instead of averaging the middle pair; 2 comes from working out the mean, 24 ÷ 12, instead of the median; 6 comes from working out the range, 6 − 0, which measures spread rather than centre.
25. (b) 5.5 kg — Method: with an even number of values the median is the mean of the two middle values, taken once the data are in order of size. Working: the eight masses are already in order and 8 ÷ 2 = 4, so the middle pair are the 4th and 5th values, 5 kg and 6 kg; the median is (5 + 6) ÷ 2 = 5.5 kg. Answer: 5.5 kg. The distractors: 5 kg comes from reading the 4th value and stopping there instead of averaging the middle pair; 8 kg comes from working out the range, 11 − 3, which measures spread rather than centre; 4 kg comes from writing down the modal mass, the only value that occurs twice, instead of the median.