🎯 Grade 4 pass booster

Answer key

1. (a) 16 — Method: keep the two rolls in order, first roll then second roll, and count every ordered pair the dice can land on, so a (2, 3) result is counted separately from a (3, 2) result. Working: the first roll can land on any of 4 numbers, and for each of those the second roll can also land on any of 4 numbers, giving 4 × 4 = 16 ordered pairs. Answer: 16. Watch out: writing down 8 comes from adding the two rolls' counts, 4 + 4, instead of multiplying them. Writing down 10 comes from listing unordered pairs, so (2, 3) and (3, 2) are counted as the same entry — that gives the 4 doubles plus 6 mixed pairs, 10 in total, instead of 16 ordered pairs. And writing down 4 comes from counting only one roll's outcomes and never pairing the two rolls together at all.
2. (d) 25 — Method: add the parts of the ratio, divide the total membership by the number of parts to find the value of one part, then multiply by the parts belonging to the group asked for. Working: 3 + 5 = 8 parts, 40 ÷ 8 = 5 members in one part, and the seniors are 5 parts, so 5 × 5 = 25. Answer: 25 seniors. The distractors: 15 is the number of juniors, which is the 3-part group; 5 is the size of one part only; 24 comes from dividing the 40 by 5, the seniors' number in the ratio, to get 8 and then multiplying that by 3.
3. (c) £840 — Method: find the total amount raised using the reverse percentage, then subtract the entry fees to find the donations. Working: £1,260 is 60% of the total, so the total is £1,260 ÷ 0.6, and subtracting the entry fees from this total leaves £840 raised through donations. Answer: £840. £2,100 comes from correctly finding the total amount raised but then forgetting to subtract the entry fees, giving the total instead of the donations alone. £504 comes from working out 40% of the entry fees themselves, £1,260 × 0.4 = £504, instead of first finding the total amount raised. £1,890 comes from treating £1,260 as 40% of the total instead of 60%, dividing by 0.4 to get a total of £3,150, and then subtracting the entry fees from that incorrect total.
4. (a) 20 litres — Volume of water = length × width × depth of water = 40 × 25 × 20 = 20 000 cm³. Since 1000 cm³ = 1 litre, divide by 1000: 20 000 ÷ 1000 = 20 litres. A pupil who uses the full height of the tank, 30 cm, instead of the water depth, 20 cm, gets 40 × 25 × 30 = 30 000 cm³ = 30 litres. A pupil who forgets to convert cm³ to litres at all gives 20 000 litres. A pupil who divides by 1000 twice by mistake gets 20 000 ÷ 1000 ÷ 1000 = 0.02 litres. The correct volume of water is 20 litres.
5. (b) 70 cm³ — Area of the triangular cross-section = base × height ÷ 2. Base × height = 3.5 × 4 = 14 cm², and half of that is 14 ÷ 2 = 7 cm². Volume of the prism = cross-sectional area × length = 7 × 10 = 70 cm³. A pupil who forgets to halve when finding the triangle's area gets 3.5 × 4 × 10 = 140 cm³. A pupil who correctly finds the cross-sectional area but forgets to multiply by the length stops at 7 cm³. A pupil who ignores the height altogether, multiplying base by length, gets 3.5 × 10 = 35 cm³. The correct volume is 70 cm³.
6. (b) 74 marks — Method: the two groups are different sizes, so their means cannot simply be averaged — rebuild each group's total mark, add the totals and divide by all 50 pupils. Working: Group A scored 20 × 80 = 1600 marks and Group B scored 30 × 70 = 2100 marks, giving 1600 + 2100 = 3700 marks altogether, so the overall mean is 3700 ÷ 50 = 74 marks. Answer: 74 marks, which sits nearer to 70 than to 80 because the larger group scored 70. The distractors: 75 marks comes from averaging the two group means, (80 + 70) ÷ 2, as though the groups were the same size; 76 marks comes from attaching each mean to the other group's size, (20 × 70 + 30 × 80) ÷ 50; 150 marks comes from adding the two means together and never dividing at all.
7. (b) 25 cm² — Method: a square has four equal sides, so divide the perimeter by 4 to recover the side length, then square that side to get the area. Working: 20 ÷ 4 = 5 cm, then 5 × 5 = 25. Answer: 25 cm². The distractors: 400 cm² comes from squaring the perimeter itself, 20 × 20, treating the 20 cm as though it were the side length; 100 cm² comes from dividing the perimeter by 2 rather than by 4, giving a side of 10 cm, and squaring that; 5 cm is the side length, from stopping as soon as the perimeter has been divided by 4 and never squaring it, which also leaves a length where an area was asked for.
8. (a) 1260° — The sum of the interior angles of a polygon with n sides is (n − 2) × 180°. For a nonagon, n = 9, so the sum is (9 − 2) × 180° = 7 × 180° = 1260°. 1620° uses 9 × 180° without subtracting 2 from n first. 140° is the size of a single interior angle of a regular nonagon (1260° ÷ 9), not the sum of all nine. 1440° uses (n − 1) × 180° = 8 × 180° instead of (n − 2) × 180°.
9. (d) 68 cm² — Method: the area of a parallelogram is base × perpendicular height. Working: 4 × 17 = 68. Answer: 68 cm². The distractors: 34 cm² comes from halving the product, which is the rule for a triangle and not for a parallelogram; 42 cm comes from treating the two given lengths as the sides of the shape and working out a perimeter, 2 × (4 + 17), which is a length and not an area; 21 cm comes from adding the base and the height, 4 + 17, instead of multiplying them.
10. (c) 282.6 cm³ — Volume of a cylinder = πr²h = 3.14 × 3² × 10 = 3.14 × 9 × 10 = 282.6 cm³. (94.2 cm³ comes from using πrh and forgetting to square the radius; 90 cm³ comes from using r²h and leaving π out altogether; 1130.4 cm³ comes from using the diameter, 6 cm, in place of the radius.)
11. (c) 8 cm — Area of a trapezium = (sum of parallel sides) ÷ 2 × height, so 45 = (a + 10) ÷ 2 × 5. Dividing 45 by 5 gives 9, so (a + 10) ÷ 2 = 9, meaning a + 10 = 18, so a = 18 − 10 = 8 cm. A pupil who correctly finds that the two parallel sides add up to 18 but forgets to subtract the known side of 10 cm gives the sum of both parallel sides, 18 cm, as the answer. A pupil who then adds 10 again by mistake instead of subtracting gets 18 + 10 = 28 cm. A pupil who halves the correct answer by mistake gets 8 ÷ 2 = 4 cm. The correct length of the other parallel side is 8 cm.
12. (c) 10 — Method: work out the mean that can be found straight away, then use total = mean × number of values on the group of three to find the missing number. Working: the mean of 15 and 25 is (15 + 25) ÷ 2 = 40 ÷ 2 = 20, so the group of three must also have a mean of 20; three numbers with a mean of 20 have a total of 20 × 3 = 60, and 20 + 30 = 50 of that total is already accounted for, so x = 60 − 50 = 10. Answer: 10, and checking, (10 + 20 + 30) ÷ 3 = 20. The distractors: 20 comes from working out the mean the two groups share and writing that down as x; −10 comes from dividing the group of three by 2 instead of by 3, which gives x + 50 = 40; 70 comes from reading the total 15 + 25 = 40 as the mean of the pair, which sets the target total at 120 and leaves x = 70.
13. (b) 6x − 3 = 4x + 9 — Method: multiply every term inside the bracket by the number outside it; the right-hand side stays as it is given. Working: 3 × 2x = 6x and 3 × (−1) = −3, so 3(2x − 1) = 6x − 3. Answer: 6x − 3 = 4x + 9. 6x − 1 = 4x + 9 comes from multiplying only the 2x by 3 and leaving the −1 unchanged. 5x − 3 = 4x + 9 comes from adding the 3 to the 2 instead of multiplying, treating 3 × 2x as (3 + 2)x = 5x. 6x − 4 = 4x + 9 comes from working out 3 × (−1) as −1 − 3 = −4 instead of 3 × (−1) = −3.
14. (a) 96 cm² — Method: a cube has six identical square faces, so the total surface area is six times the area of one face. Working: one face has area 4 × 4 = 16 cm², and 6 × 16 = 96. Answer: 96 cm². The distractors: 16 cm² is the area of a single face, from stopping before multiplying by the six faces; 64 cm³ comes from working out the volume, 4 × 4 × 4, which is a different measure and carries a different unit; 24 cm² comes from multiplying the six faces by the edge length, 6 × 4, instead of by the area of a face.
15. (d) 24 — There are 4 choices for the first digit. Once that digit is used, 3 digits remain for the second position, and then 2 digits remain for the third position: 4 × 3 × 2 = 24 codes. Choosing 64 comes from allowing a digit to be reused at every position, 4 × 4 × 4 = 64, which is not allowed here since no digit repeats. Choosing 12 comes from multiplying only the first two positions, 4 × 3 = 12, and forgetting that a third digit is also chosen from the digits that remain. Choosing 6 comes from counting only the arrangements of one single set of three digits, 3 × 2 × 1 = 6, and forgetting that there are 4 different sets of three digits that can be chosen from 2, 3, 4 and 5.
16. (d) 4 — Method: collect the x terms on one side and the number terms on the other. Working: subtract 3x from both sides: 4x − 5 = 11. Add 5 to both sides: 4x = 16. Divide by 4: x = 4. Answer: 4. 0.6 comes from adding the x terms instead of subtracting when collecting them, 7x + 3x = 10x, and also subtracting the constants the wrong way round, 11 − 5 = 6, giving 10x = 6. 1.5 comes from correctly collecting the x terms as 4x but subtracting the constants the wrong way round, 11 − 5 instead of 11 + 5. −4 comes from moving the x terms to the wrong side, giving 3x − 7x instead of 7x − 3x, along with a matching sign error on the constants.
17. (a) 30 — Method: an outlier is a value that lies far away from the pattern set by the rest of the data, so compare each value with the group the others form. Working: five of the counts, 5, 7, 8, 9 and 11, lie within 6 of one another and the steps between them are 2, 1, 1 and 2; the remaining count of 30 is 19 above the nearest of them, so it is the value that does not belong to the pattern. Answer: 30. The distractors: 5 comes from picking the smallest value, on the idea that the odd one out must be at the bottom of the list; 11 comes from ordering the data and stopping one value short, taking the largest of the counts that sit close together; 8.5 comes from working out the median, (8 + 9) ÷ 2, and giving a measure of centre where a value standing apart was asked for.
18. (c) The mean, because every value counts towards it, so 100 pulls it from 7 up to about 20.3. — Method: work each measure out before the extra value is added and again afterwards, then compare the size of the two changes. Working: before, the six values total 42, so the mean is 42 ÷ 6 = 7, and the middle pair 6 and 8 give a median of (6 + 8) ÷ 2 = 7; after, the seven values total 142, so the mean is 142 ÷ 7 = 20.29 to 2 decimal places, while the median is now the 4th of the seven ordered values, which is 8; the mean has moved by about 13.3 and the median by 1. Answer: the mean, because every value counts towards it, so 100 pulls it from 7 up to about 20.3 — this is why the median is often preferred when a data set contains an outlier. The distractors: the reply that the mean rises by 100 adds the extra value to the mean instead of adding it to the total; the reply that the median moves to 12 takes the largest of the original values as the new middle instead of counting to the 4th of the seven values; the reply about even and odd counts quotes a rule that does not exist, since the median moved because a very large value was added, not because the count of values changed.
19. (a) 180 cm³ — Method: the volume of a right prism is the area of its cross-section multiplied by its length, and the area of a triangle is half the base multiplied by the perpendicular height. Working: the cross-section has area (6 × 5) ÷ 2 = 15 cm², and 15 × 12 = 180. Answer: 180 cm³. The distractors: 360 cm³ comes from taking the cross-section as 6 × 5 = 30 and never halving it, which measures the rectangle around the triangular face rather than the face itself; 66 cm³ comes from adding the base and the perpendicular height and halving, (6 + 5) ÷ 2 = 5.5, which is the trapezium rule used where the triangle rule is needed, and then multiplying by the 12 cm length; 15 cm³ comes from working out the triangular cross-section correctly and stopping there, so the 12 cm length is never used and an area is handed in as a volume.
20. (d) 23.57 °C — Method: add all seven temperatures, divide by the number of readings and round only at the end. Working: 22 + 24 + 23 + 25 + 26 + 21 + 24 = 165, and 165 ÷ 7 = 23.5714…, which rounds to 23.57 to 2 decimal places. Answer: 23.57 °C. The distractors: 24 °C comes from writing down the mode, the only temperature recorded twice, instead of the mean; 27.5 °C comes from dividing the total by 6 instead of by the 7 days recorded; 5 °C comes from working out the range, 26 − 21, which is a measure of spread and not an average.
21. (b) −1% — Method: write each change as a multiplier and multiply them. A 10% fall is × 0.9 and a 10% rise is × 1.1. Working: 0.9 × 1.1 = 0.99, so the final price is 99% of the original, which is 1% less. Answer: an overall change of −1%. The distractors: 0% comes from assuming a 10% fall and a 10% rise cancel — they do not, because the rise is 10% of a smaller amount; +1% has the size right but the sign wrong, from reading the multiplier 0.99 as 1% above 1 instead of 1% below it; −2% comes from finding the 1% fall and then counting it once for each of the two changes.
22. (c) 10 — There are 5 possible cards and 2 possible coin results, so listing every pair gives 5 × 2 = 10 equally likely outcomes. Choosing 5 comes from listing only the card outcomes and forgetting the coin flip adds a second stage to each one. Choosing 7 comes from adding the two stages instead of combining them, 5 + 2 = 7, rather than pairing every card with every coin result. Choosing 20 comes from counting each coin result twice for every card, 5 × 2 × 2 = 20, effectively pairing every card with the coin twice over.
23. (c) 3 — There are 3 outcomes for the first draw and 3 for the second, giving 3 × 3 = 9 ordered pairs in total: first draw 1 with second draw 1, 2 or 3; first draw 2 with second draw 1, 2 or 3; and first draw 3 with second draw 1, 2 or 3. Checking the list, the only pairs with both numbers the same are 1 with 1, 2 with 2, and 3 with 3, so there are 3. A candidate who answers 9 has counted every outcome instead of only the matching ones. A candidate who answers 6 has mistakenly counted pairs such as 1 with 2 and 2 with 1 as matching because they contain the same two digits. A candidate who answers 1 has stopped after finding only the first matching pair in the list.
24. (b) 4% — Method: find the total interest earned, share it equally across the number of years to find one year's interest, then write it as a percentage of the amount invested. Working: total interest = £840 − £750 = £90, so one year's interest is £90 ÷ 3 = £30, and £30 as a percentage of £750 is (£30 ÷ £750) × 100 = 4%. Answer: 4%. 12% comes from treating the total interest of £90 as if it were earned in a single year, (£90 ÷ £750) × 100 = 12%, forgetting to divide by 3 years. 0.04% comes from finding the correct decimal, £30 ÷ £750 = 0.04, but forgetting to multiply by 100 to convert it into a percentage. 112% comes from writing the final amount, £840, as a percentage of the amount invested, £750, without first subtracting the £750 to find the interest alone.
25. (b) 3.5 — Method: work out each percentage of its number separately, then subtract the smaller result from the larger one. Working: 45% of 70 = 31.5, and 35% of 80 = 28, so the difference is 31.5 − 28 = 3.5. Answer: 3.5. 11.5 comes from pairing the percentages with the wrong numbers, working out 35% of 70 = 24.5 and 45% of 80 = 36, and finding their difference. 59.5 comes from adding the two correct results, 31.5 + 28, instead of subtracting them. 10 comes from simply subtracting the two percentages themselves, 45 − 35, without applying them to the numbers at all.