🔺 Higher stretch — grade 8 and 9 topics

Answer key

1. (a) −3/4 — Method: the tangent at a point on a circle is perpendicular to the radius drawn to that point, so find the gradient of the radius and then take its negative reciprocal. Working: the radius joins (0, 0) to (6, 8), so its gradient is 8 ÷ 6, which cancels to 4/3. Turning 4/3 upside down gives 3/4, and changing the sign gives −3/4. Answer: the gradient of the tangent is −3/4. The distractors: 4/3 is the gradient of the radius itself, quoted without taking the perpendicular at all; −4/3 changes the sign but leaves the fraction the same way up, so the two gradients do not multiply to give −1; 3/4 turns the fraction upside down but keeps it positive, which is the other half of the same rule left undone.
2. (b) 0.0309 — Method: P(both defective | at least one defective) = P(both defective) ÷ P(at least one defective). Find each using independence: P(both) = 0.06², P(at least one) = 1 − P(neither) = 1 − 0.94². Working: P(both) = 0.06² = 0.0036. P(neither) = 0.94² = 0.8836, so P(at least one) = 1 − 0.8836 = 0.1164. P(both | at least one) = 0.0036 ÷ 0.1164 = 0.0309 (3 s.f.). Answer: 0.0309. Watch out: leaving the answer as 0.0036 gives P(both defective) itself, not the probability once you already know at least one is defective — you still need to divide by P(at least one defective). Giving 0.0600 answers with the single-component defect rate, ignoring the condition altogether. And 0.5000 assumes that 'at least one' makes the outcomes 'exactly one defective' and 'both defective' equally likely, which is not how these probabilities combine.
3. (c) 50 — Method: the edge of the track is a circle centred on the origin, so it has equation x² + y² = r²; use the floodlight whose coordinates are given to find r², then substitute x = 0 to find where that circle meets the positive y-axis. Working: 30² + 40² = 900 + 1600 = 2500, so the edge of the track is x² + y² = 2500. Substituting x = 0 gives k² = 2500, so k = √2500 = 50, taking the positive root because k is positive. Answer: k = 50. The distractors: 2500 is r² used as though it were the radius, which would place the second floodlight fifty times too far from the centre; 70 adds the two coordinates, 30 + 40, instead of adding their squares; 40 takes the y-coordinate of the first floodlight to be the radius, which would only be true if that floodlight stood on the y-axis itself.
4. (b) y = 2x² + 14x + 19 — A translation by the vector (−2, 0) moves the graph 2 units in the negative x-direction, which means replacing x with (x + 2): 2(x + 2)² + 6(x + 2) − 1. Expanding 2(x + 2)² gives 2x² + 8x + 8, and 6(x + 2) gives 6x + 12; collecting terms 2x² + 8x + 8 + 6x + 12 − 1 simplifies to 2x² + 14x + 19. Substituting (x − 2) instead of (x + 2) — translating in the wrong direction — gives 2(x−2)² + 6(x−2) − 1, which simplifies to 2x² − 2x − 5. Distributing the outer 2 only onto the x² term of the expansion, instead of onto every term of (x + 2)², gives 2x² + 10x + 15. Dropping the −1 when collecting the constant terms, treating 8 + 12 as 20 rather than 8 + 12 − 1 as 19, gives 2x² + 14x + 20.
5. (c) 5/18 — Method: knowing the total is even cuts the 36 equally likely outcomes down to the even ones, so count those first and then count how many of them give 8. Working: the even totals occur as 2 once, 4 three times, 6 five times, 8 five times, 10 three times and 12 once, which is 18 outcomes. The total is 8 for 2 and 6, 3 and 5, 4 and 4, 5 and 3, and 6 and 2, which is 5 outcomes. The probability is 5/18, which will not cancel. Answer: the probability is 5/18. The distractors: 5/36 keeps the right count of ways to make 8 but divides by all 36 outcomes, ignoring the fact that the odd totals have already been ruled out; 1/6 treats the six even totals 2, 4, 6, 8, 10 and 12 as equally likely and picks one of them, which they are not; 1/11 treats the eleven possible totals from 2 to 12 as equally likely and uses neither the counting nor the condition.
6. (a) Outside: OQ² = 221 > r² = 169 — OQ² = 10² + 11² = 100 + 121 = 221. Comparing this with r² = 169: since 221 > 169, OQ > r, so Q lies outside the circle — this is the correct verdict AND the correct working. 'Outside: OQ = 21 (10 + 11) > r = 13' reaches the same Outside verdict, but by invalid working: it adds the coordinates instead of squaring them (10 + 11 = 21, rather than 10² + 11² = 221), so the stated 'OQ' of 21 is not a distance at all — the verdict happens to match, but the method is wrong. 'Inside: OQ ≈ 14.87 < r² = 169' correctly finds the distance OQ = √221 ≈ 14.87, but then compares that DISTANCE with r² = 169 instead of with r = 13 — comparing two different kinds of quantity gives a meaningless, and here wrong, verdict. 'Inside: OQ² = 221 < (2r)² = 676' confuses the radius with the diameter: it compares OQ² with the diameter squared, (2 × 13)² = 676, instead of with r² = 169.
7. (a) 16 — A and B share the same y-coordinate, so the distance between them is the horizontal difference between their x-coordinates: 8 − (−8) = 16, giving a chord of length 16. Choosing 8 gives only the x-coordinate of one point, not the full distance between the two points. Choosing 34 is the diameter of the circle (2 × 17), not the length of this particular chord. Choosing 17 is the radius — the distance from the centre to A or to B, not from A to B.
8. (d) It diverges, growing rapidly without limit. — x₁ = 2³ − 2 = 8 − 2 = 6. x₂ = 6³ − 2 = 216 − 2 = 214. x₃ = 214³ − 2 = 9800344 − 2 = 9800342. The values 6, 214, 9800342, … grow far larger at every step, so the sequence diverges rather than settling anywhere. Checking whether the sequence converges to a fixed value near 2 fails, since the terms grow enormously instead of levelling off. Checking for a repeating pair of values also fails, since 6, 214 and 9800342 are all different, with no sign of a return to 6. x₀ = 2 is a fixed point only if 2³ − 2 = 2, but 2³ − 2 = 6, not 2, so the sequence does not stay constant.
9. (b) 1/3 — Method: the first sweet has already been taken and it was red, so work out the second probability from what is actually left in the bag. Working: one red sweet has gone, so 3 red sweets remain out of 9 sweets altogether, giving 3/9. Dividing the numerator and the denominator by 3 gives 1/3. Answer: the probability is 1/3. The distractors: 2/5 is 4/10, the probability for the first draw used again, which is only right if the first sweet is put back; 3/10 takes one off the red count but leaves the total at 10, updating half of the fraction; 4/9 takes one off the total but leaves the red count at 4, updating the other half of the fraction.
10. (c) 9/28 — Method: two linked steps. Total everyone whose test is positive, since the person picked is known to be one of them, then divide the positive tests that belong to people with the condition by that total. Working: 45 positive tests come from people who have the condition and 95 come from people who do not, so 140 tests are positive. The people with the condition give 45/140, and dividing the numerator and the denominator by 5 gives 9/28. Answer: the probability is 9/28. The distractors: 9/10 is 45/50, the probability of a positive test given that the person has the condition, which is the condition and the event the wrong way round and is the figure a candidate quotes when the two are confused; 9/200 is 45/1000, dividing by everyone tested rather than by the 140 who tested positive; 1/20 is 50/1000, the probability that a person has the condition before the test result is used at all.
11. (d) 5√2 — For a circle x² + y² = r², the 50 on the right-hand side is r², not r, so the radius is √50. Writing 50 as 25 × 2, the largest square factor times what remains, gives √50 = √25 × √2 = 5√2. Forgetting to square-root 50 at all and giving the value of r² instead gives 50. Halving 50 instead of taking its square root gives 25. Using 25 as the number left outside the square root sign, instead of as the number under it, gives the wrongly simplified 25√2.
12. (d) −2 — y = f(x) − 6 is f(x) shifted down by 6, so every y-value on the graph decreases by 6. At x = 0, f(0) = 4, so the new y-value is 4 − 6 = −2. Adding 6 instead of subtracting gives 10; writing down the shift itself, −6, or leaving the original value 4 unchanged both skip the translation altogether.
13. (a) 1.36 — Method: put the starting value into the right-hand side to get x₁, feed that value back in to get x₂, and round only once the second value has been found. Working: x₁ = 5 ÷ (1 + 2) = 5 ÷ 3 = 1.66666…; x₂ = 5 ÷ (1.66666… + 2) = 5 ÷ 3.66666… = 1.36363…. The digit in the third decimal place is 3, so x₂ = 1.36 correct to 2 decimal places. Answer: 1.36. The distractors: 1.67 is x₁, the value after a single use of the formula, given by a candidate who counts the starting value itself as x₁; 1.49 is x₃ = 1.48648…, one use of the formula too many; 1.37 comes from writing x₁ down as 1.66, truncating the display instead of keeping it in full, and then working out 5 ÷ 3.66 = 1.36612…, which rounds up to 1.37.
14. (d) 1.2 pupils per mark — Method: on a histogram whose class intervals are not all the same width the height of a bar is not the frequency but the frequency density, found by dividing the frequency of the class by the width of that class, so that the area of the bar represents the frequency. Working: the class 40 ≤ m < 60 holds 24 pupils, and its width is 60 − 40 = 20 marks, so the frequency density is 24 ÷ 20 = 1.2. Answer: 1.2 pupils per mark. The distractors: 24 pupils per mark comes from plotting the frequency itself as the height, which is only correct when every class has the same width; 2.4 pupils per mark comes from dividing by 10, the width of the narrowest class, instead of by the width of this class; 0.2 pupils per mark comes from dividing by the 120 pupils in the year group, which gives the proportion of pupils in the class and not a frequency density.
15. (d) −3 — Substitute y = 11 into y = 5 − 2x, giving 11 = 5 − 2x. Subtracting 5 from both sides gives 6 = −2x, so x = 6 ÷ (−2) = −3. A candidate who mishandles the negative sign when rearranging, treating the equation as 6 = 2x, gets x = 3. A candidate who correctly finds −2x = 6 but forgets to divide by 2 at all gets x = 6. A candidate who adds 5 and 11 instead of subtracting, getting 2x = 16, gets x = 8.
16. (c) The class with times from 10 up to 20 — Method: to find the median class from a histogram, first turn each bar's frequency density into a frequency using density × class width, build up the cumulative frequency, and find the first class whose cumulative frequency reaches or passes n ÷ 2. Working: the four classes have widths 10, 10, 20 and 20, so their frequencies are 5 × 10 = 50, 2 × 10 = 20, 1.5 × 20 = 30 and 1 × 20 = 20, which add to the 120 visitors stated. The median sits at position 120 ÷ 2 = 60. The cumulative frequency is 50 after the first class and 50 + 20 = 70 after the second, so the 60th visitor is reached during the second class. Answer: the median lies in the class 10 ≤ t < 20. Watch which class each shortcut lands on: the tallest bar belongs to the first class, with the highest frequency density, 5 — but the tallest bar shows where visitors are packed most densely, not where the middle visitor falls, and picking it lands one class too early, at 0 ≤ t < 10; taking half of the total TIME span instead of half of the total NUMBER of visitors, 60 minutes ÷ 2 = 30 minutes, lands in the class 20 ≤ t < 40, confusing a value on the horizontal axis with a position in the data; and using the full 120 visitors as the target position, rather than 120 ÷ 2 = 60, reaches all the way to the last class, 40 ≤ t < 60, treating the whole data set's size as though it were the position of a single middle value.
17. (c) 27 — Method: a frequency is the area of the part of the bar being asked about, so frequency = frequency density × the width of that part. Working: the part asked about runs from 20 to 35, so its width is 35 − 20 = 15 metres; the frequency density there is 1.8 per metre, so the estimate is 1.8 × 15 = 27. Answer: about 27 throws. The distractors: 72 comes from taking the whole bar, 1.8 × 40, and so counting every throw from 20 up to 60; 1.8 comes from reading the height of the bar as a frequency, when a height is a density and only an area is a count; 63 comes from using the upper value 35 as the width, 1.8 × 35, instead of the width 35 − 20.
18. (b) (1/2)b − (1/2)a — Method: MN runs from M to N, so MN = ON − OM, with OM = (1/2)a and ON = (1/2)b. Working: MN = (1/2)b − (1/2)a. Answer: MN = (1/2)b − (1/2)a. Subtracting the other way round gives (1/2)a − (1/2)b, the reverse vector from N to M; subtracting the wrong way round AND forgetting to halve gives a − b, which is BA, not MN; and adding the two halved vectors instead of subtracting them gives (1/2)a + (1/2)b, which is the position vector of the midpoint of AB. Always subtract the START point's vector from the END point's vector, and halve OA and OB before you combine them, not after.