🔺 Higher stretch — grade 8 and 9 topics

Answer key

1. (d) 5/11 — Method: the pen already taken was black, so update the contents of the box before working out the second probability. Working: the box held 12 pens and one black pen has gone, so 11 pens remain. None of the blue pens has been taken, so all 5 are still there, and the probability is 5/11, which will not cancel. Answer: the probability is 5/11. The distractors: 5/12 uses the box as it was at the start, which is only correct if the first pen is put back; 4/11 takes one off the blue count as well as the total, as though the pen removed had been blue; 6/11 gives the probability that the second pen is black, carrying on with the colour of the first pen instead of the colour asked for.
2. (a) 9/25 — Method: P(badminton | tennis) = n(tennis and badminton) ÷ n(tennis) — restrict to the tennis-players, then find what fraction of them also play badminton. Working: n(tennis and badminton) = 18, n(tennis) = 50, so P(badminton | tennis) = 18/50 = 9/25. Answer: 9/25. Watch out: dividing by 40 (the badminton total) finds P(tennis | badminton) instead of P(badminton | tennis) — the wrong direction. Dividing by 90 (all the members named in the question) ignores that you already know the member plays tennis. And dividing by 72 (50 + 40 − 18, the number who play at least one of the two sports) answers a question about the union, not the condition you were given.
3. (c) 2.26 — Method: apply the formula repeatedly, keeping the whole display each time, and stop when two values in a row round to the same 2 decimal places; that shared rounded value is the solution to that accuracy. Working: x₁ = ∛(2 × 2 + 7) = ∛11 = 2.22398…; x₂ = ∛(2 × 2.22398… + 7) = ∛11.44796… = 2.25377…; x₃ = ∛11.50754… = 2.25767…; x₄ = ∛11.51534… = 2.25818…. Now x₃ and x₄ both round to 2.26, so the sequence has settled. Answer: 2.26. The distractors: 2.22 is x₁ rounded, quoted by a candidate who stops after one use of the formula; 2.25 is x₂ rounded, quoted by a candidate who stops as soon as two values look close instead of waiting until two consecutive values round to the same figure; 1.91 is ∛7, which comes from ignoring the 2x term and solving x³ = 7 instead.
4. (b) 25 — The tangent at (9, 12) is 9x + 12y = 225. Setting y = 0 (the x-axis): 9x = 225, so x = 25. Choosing 18.75 comes from swapping the coefficients in the tangent equation (using 12x + 9y = 225) before setting y = 0. Choosing 15 is where the circle itself meets the x-axis (from x² = 225), not where the tangent does. Choosing 9 is just the x-coordinate of the original point (9, 12), not the point P.
5. (b) −3/4 — The tangent to a circle at a point is always perpendicular to the radius drawn to that point. The radius from (0, 0) to (3, 4) has gradient 4/3. The gradient of a line perpendicular to a line with gradient m is the negative reciprocal, −1/m, so the tangent's gradient here is −3/4. Using the radius's own gradient, forgetting that the tangent is perpendicular to it, gives 4/3. Negating the radius's gradient without also taking the reciprocal gives −4/3. Taking the reciprocal of the radius's gradient without negating it gives 3/4.
6. (d) 44 — Method: a cumulative frequency counts everything below a value, so the frequency of a class is the running total at the top of the class minus the running total at the bottom of it. Working: the running total below 20 kg is 96 and the running total below 10 kg is 52, so the number of boxes in the class 10 ≤ m < 20 is 96 − 52 = 44. Answer: 44 boxes. The distractors: 96 comes from quoting the running total at 20 kg itself, which counts every box below 20 kg rather than only those in this class; 34 comes from subtracting the wrong pair, 52 − 18, which gives the class 5 ≤ m < 10 instead; 54 comes from subtracting from the grand total, 150 − 96, which gives the boxes of 20 kg or more.
7. (c) 145 g — Method: find the position of the median from the total frequency, locate the class that contains it, then use linear interpolation inside that class, assuming the apples in it are spread evenly. Working: the median is the 100 ÷ 2 = 50th apple; the running totals are 10, then 10 + 30 = 40, then 40 + 40 = 80, so the 50th apple lies in the class 140 ≤ m < 160; it is the 50 − 40 = 10th of the 40 apples in that class, and the class is 20 g wide, so the median is 140 + (10 ÷ 40) × 20 = 140 + 5 = 145. Answer: an estimated median of 145 g. The distractors: 150 g comes from giving the midpoint of the class that contains the median instead of interpolating inside it; 140 g comes from stopping at the lower boundary of that class, which locates the class but not the value; 155 g comes from measuring the 5 g step down from the upper boundary, 160 − 5, instead of up from the lower boundary.
8. (b) x² + y² = 1369 — For a circle centred at the origin, the radius squared equals the sum of the squares of the coordinates of any point on it: r² = 12² + 35² = 144 + 1225 = 1369. The equation is x² + y² = 1369. x² + y² = 2209 comes from adding the coordinates first and then squaring the sum: (12 + 35)² = 47² = 2209, instead of squaring each coordinate separately. x² + y² = 1225 comes from using only 35² and leaving out the 12² term. x² + y² = 144 comes from using only 12² and leaving out the 35² term.
9. (d) 2/3 — Method: since A is the midpoint of OE, OE = 2a, so E = 2a. Since FB is twice AF, F is 1/3 of the way along AB from A, so F = a + 1/3(b − a) = (2/3)a + (1/3)b. G is the midpoint of OB, so G = (1/2)b. Working: EF = F − E = (2/3)a + (1/3)b − 2a = −(4/3)a + (1/3)b, and EG = G − E = −2a + (1/2)b. Comparing term by term, 2/3 × (−2a + (1/2)b) = −(4/3)a + (1/3)b, which matches EF exactly — the same scalar works on both the a-term and the b-term, so the two vectors are parallel, and since they share the point E the three points are collinear. Answer: k = 2/3, so E, F and G lie on a straight line. Giving 1/3 instead is the scalar linking F to G (FG = (1/3)EG), not E to F; giving 3/2 is the reciprocal — it is EG that equals 3/2 × EF, not the other way round, since EF = k × EG was what was asked for; and giving 4/3 is EF's a-coefficient read off raw, without ever dividing it by EG's a-coefficient to form the comparison. Always match the direction of the scalar to the vectors exactly as the question states them.
10. (a) 19 — Each time x increases by 1, y increases by 3 (4, 7, 10, 13 — a constant difference of 3). So at x = 4, y = 13 + 3 = 16, and at x = 5, y = 16 + 3 = 19. A candidate who stops one step early, giving the value for x = 4 instead of x = 5, answers 16. A candidate who overcounts and adds three steps of 3 instead of two from x = 3 gets 13 + 9 = 22. A candidate who mistakes the y-intercept (4) for the common difference and adds 4 twice from x = 3 gets 13 + 8 = 21.
11. (a) 7.9 m — Method: the iteration converges on the width of the plot, so run the formula three times from the starting value and then add 4 m, because the length is 4 m greater than the width. Working: x₁ = √(30 − 4 × 3) = √18 = 4.24264…; x₂ = √(30 − 4 × 4.24264…) = √13.02943… = 3.60963…; x₃ = √(30 − 4 × 3.60963…) = √15.56147… = 3.94480…. The estimate for the length is 3.94480… + 4 = 7.94480…, which is 7.9 m correct to 1 decimal place. Answer: 7.9 m. The iteration is still oscillating at x₃, so this is the estimate that three uses of the formula give, not a settled value. The distractors: 3.9 m is x₃ itself, the width, given by a candidate who runs the iteration correctly and then stops before the step the question actually asks for; 7.6 m uses x₂ in place of x₃, one use of the formula short, and then adds the 4 m correctly; 15.8 m multiplies the width by 4 instead of adding 4 m to it, reading greater than as a multiplier.
12. (c) y = 3x + 2 — Method: divide the change in the outputs by the change in the inputs to find the multiplier, then put one pair of values into the rule to find the number added on. Working: the output rises by 11 − 5 = 6 while the input rises by 3 − 1 = 2, so the multiplier is 6 ÷ 2 = 3; with an input of 1, 3 × 1 = 3 and the output is 5, so 2 is added. Answer: y = 3x + 2, checked against the second pair by 3 × 3 + 2 = 11. The distractors: y = 3x − 2 comes from finding the multiplier 3 and then subtracting the 2 instead of adding it; y = 2x + 3 comes from swapping the multiplier and the number added on; y = x + 4 comes from assuming the input is multiplied by 1 and using 5 − 1 = 4 as the number added on.
13. (c) 4x − 3 — ff(x) means f(f(x)): substitute f(x) into f in place of x. f(f(x)) = 2 × f(x) − 1 = 2 × (2x − 1) − 1. Expanding the bracket: 2 × (2x − 1) = 4x − 2. Combining the constant terms: −2 − 1 = −3, so f(f(x)) = 4x − 3. Writing 4x − 2 comes from expanding 2(2x − 1) correctly to get 4x − 2, then forgetting to subtract the outer 1 at all. Writing 4x² − 4x + 1 comes from reading ff(x) as f(x) multiplied by itself, (2x − 1)(2x − 1) = 4x² − 4x + 1, instead of substituting f(x) into f. Writing 4x − 1 comes from doubling the coefficient of x in the original rule directly, without actually substituting f(x) into f at all.
14. (c) −1.5 — Since n = k × m, dividing a number in n by the matching number in m gives k: k = −6 ÷ 4 = −1.5 (check with the bottom numbers: −9 ÷ 6 = −1.5, the same value, confirming n is a scalar multiple of m). 1.5 has the correct size but is missing the negative sign. −10 comes from subtracting the top numbers, −6 − 4, instead of dividing them. −24 comes from multiplying the top numbers, −6 × 4, instead of dividing them.
15. (b) 5 ≤ m < 10 — Method: with 60 values the median is the 60 ÷ 2 = 30th value in order, so build a running total until it first reaches 30. Working: the running totals are 22 after the first class, 22 + 20 = 42 after the second, 51 after the third, 56 after the fourth and 60 after the fifth; the 30th parcel is past 22 but not past 42, so it lies in the second class. Answer: the median lies in the class 5 ≤ m < 10. The distractors: 0 ≤ m < 5 comes from giving the class with the greatest frequency, 22, which is the modal class and not the median class; 10 ≤ m < 20 comes from choosing the middle class in the list of five instead of counting to the middle value; 20 ≤ m < 30 comes from halving the range of the data, 50 ÷ 2 = 25, and giving the class that contains 25 kg rather than the class that contains the 30th parcel.
16. (a) 842.0 — The radius to (20, 21) has gradient 21/20, so the tangent's gradient is −20/21. The tangent line is y − 21 = −20/21(x − 20), i.e. y = −20/21x + 841/21. Setting y = 0 gives the x-intercept x = 841/20 = 42.05; setting x = 0 gives the y-intercept y = 841/21 ≈ 40.048. The area of triangle OPQ is 1/2 × 42.05 × 40.048 ≈ 842.0. 1684.0 comes from multiplying the two intercepts without the 1/2 that a triangle's area needs — twice the correct area. 580.7 comes from using the circle's radius, 29, as a side of the triangle instead of the x-intercept, 42.05: 1/2 × 29 × 40.048 ≈ 580.7. 2.0 comes from a sign error in the tangent's gradient — using 20/21 instead of −20/21 — which gives a different line, with intercepts x ≈ −2.05 and y ≈ 1.952, and area 1/2 × 2.05 × 1.952 ≈ 2.0.
17. (c) 10x − 15 — Expand the bracket first: 3(2x − 5) = 6x − 15. Then add the 4x: 6x − 15 + 4x = 10x − 15. The option 10x − 5 comes from forgetting to multiply the 5 inside the bracket by 3 (treating it as 6x − 5), then adding 4x. The option 10x + 15 comes from a sign error when expanding, treating 3 × (−5) as +15 instead of −15, then adding 4x. The option 6x − 15 comes from expanding the bracket correctly but forgetting to add the 4x term at all.
18. (d) 2x² − 4x + 3 — fg(x) means f(g(x)): substitute g(x) into f in place of x. g(x) = x − 1, so fg(x) = f(x − 1) = 2(x − 1)² + 1. Expanding (x − 1)² = x² − 2x + 1, so fg(x) = 2(x² − 2x + 1) + 1 = 2x² − 4x + 2 + 1 = 2x² − 4x + 3. Writing 2x² comes from working out gf(x) instead — g(f(x)) = f(x) − 1 = (2x² + 1) − 1 = 2x², which applies the functions in the wrong order. Writing 2x² − 1 comes from expanding (x − 1)² as x² − 1, dropping the middle term, so f(x − 1) becomes 2(x² − 1) + 1 = 2x² − 2 + 1 = 2x² − 1. Writing 2x² − 4x + 2 comes from expanding correctly but forgetting the final + 1 from f, stopping at 2(x² − 2x + 1) = 2x² − 4x + 2.