🔺 Higher stretch — grade 8 and 9 topics

Answer key

1. (b) It is not even an ordinary equation with a solution: expanding the left-hand side gives 3x − 12, and 3x − 12 = 3x − 4 would require −12 = −4, which is never true. — Expanding the left-hand side, 3(x − 4) = 3x − 12. Setting this equal to the right-hand side, 3x − 12 = 3x − 4, gives −12 = −4 once the 3x terms are removed from both sides — a statement that is never true, so no value of x satisfies the equation at all, and it is certainly not an identity. The option about substituting a specific value misunderstands algebraic expansion, which holds for every x, not one chosen value. The option matching the first term wrongly assumes that is enough to prove equivalence. The option about multiplying the 4 by 3 on both sides is nonsensical, since there is only one bracket to expand, on the left-hand side.
2. (b) 5.00 — Continuing the iteration: x₁ = √(2 × 1 + 15) = √17 = 4.1231, x₂ = √(2 × 4.1231 + 15) = √23.2462 = 4.8214, x₃ = √(2 × 4.8214 + 15) = √24.6428 = 4.9642, x₄ = √(2 × 4.9642 + 15) = √24.9284 = 4.9928, and the values keep climbing towards 5.00 as n increases (the limit L satisfies L² = 2L + 15, so L² − 2L − 15 = 0, giving L = 5). Choosing 4.99 stops after x₄, one iteration before the value has settled fully to 5.00. Choosing 17.00 uses the value under the very first square root (2 × 1 + 15 = 17) as if that number itself were the limit. Choosing 1.00 assumes the sequence never moves from the starting value x₀.
3. (c) 3/20 — Method: the second fraction is quoted for the perennials only, so it is a conditional probability and the two fractions multiply. Working: the probability that a plant is a perennial is 3/5, and given that it is a perennial the probability that it is in flower is 1/4. Multiplying gives 3 × 1 over 5 × 4, which is 3/20. Answer: the probability is 3/20. The distractors: 17/20 comes from adding the fractions, 12/20 plus 5/20, instead of multiplying, which would be right only for two outcomes that cannot both happen; 4/9 comes from adding the numerators and the denominators separately, the classic 3 + 1 over 5 + 4; 1/4 quotes the flowering fraction on its own, as though every plant in the garden centre were a perennial, so the 3/5 is never used.
4. (b) (1/2)b − (1/2)a — Method: MN runs from M to N, so MN = ON − OM, with OM = (1/2)a and ON = (1/2)b. Working: MN = (1/2)b − (1/2)a. Answer: MN = (1/2)b − (1/2)a. Subtracting the other way round gives (1/2)a − (1/2)b, the reverse vector from N to M; subtracting the wrong way round AND forgetting to halve gives a − b, which is BA, not MN; and adding the two halved vectors instead of subtracting them gives (1/2)a + (1/2)b, which is the position vector of the midpoint of AB. Always subtract the START point's vector from the END point's vector, and halve OA and OB before you combine them, not after.
5. (a) n² + n — n² + n = n(n + 1), the product of two consecutive integers. One of any two consecutive integers is always even, so their product is always even, whatever whole number n is. n² − n + 1 = n(n − 1) + 1 is always ODD, since n(n − 1) is even and adding 1 makes it odd — the opposite of what's asked. 2n + 1 is always odd by definition, not even. n² + 1 is not always even at all: it depends on whether n is odd or even, and testing n = 2 gives 5, which is odd.
6. (b) (6, 2) — The overall journey from house to park is the sum of the two vectors: top = 2 + 4 = 6, bottom = 5 + (−3) = 2, giving (6, 2). A candidate who subtracts the second vector from the first instead of adding gets (2 − 4, 5 − (−3)) = (−2, 8). A candidate who subtracts the other way round gets (4 − 2, −3 − 5) = (2, −8). A candidate who forgets the negative sign on the second vector's bottom number and adds 3 instead of −3 gets (6, 8). Because the journeys join end to end, the correct resultant vector is (6, 2).
7. (c) −4 — f(2) = 7, and y = f(x) + a passing through (2, 3) means f(2) + a = 3, so 7 + a = 3, giving a = 3 − 7 = −4. Writing a = 4 comes from subtracting the wrong way round, 7 − 3 instead of 3 − 7. Writing a = 10 comes from adding the two y-values instead of subtracting one from the other. Writing a = 3 comes from taking the new y-coordinate as the value of a directly, without accounting for the original y-value of 7 at all.
8. (d) x = −2, x = 6; y-intercept (0, 12) — Reflecting y = f(x) in the x-axis, to get y = −f(x), negates every y-value but leaves every x-value fixed. The x-intercepts happen where y = 0, and −0 = 0, so they are unaffected: y = −f(x) still crosses the x-axis at x = −2 and x = 6. The y-intercept is the value at x = 0: f(0) = −12, so −f(0) = 12, giving the point (0, 12) — the sign flips because the y-intercept is a nonzero y-value, unlike the roots. Writing 'x = 2, x = −6; y-intercept (0, −12)' comes from confusing −f(x) with f(−x) — reflecting in the y-axis instead of the x-axis, which negates the x-values of the intercepts (turning −2 into 2 and 6 into −6) but leaves f(0) unchanged, since f(−0) = f(0) = −12. Writing 'x = −2, x = 6; y-intercept (0, −12)' comes from forgetting that −f(x) is a reflection at all, and assumes both intercepts stay exactly as they were. Writing 'x = 2, x = −6; y-intercept (0, 12)' correctly negates the y-intercept but wrongly negates the x-intercepts too, as if a reflection in the x-axis also flipped the sign of every x-value.
9. (a) (4, 1) — y = −f(x) reflects the graph of y = f(x) in the x-axis: every point (x, y) maps to (x, −y). Applying this to (4, −1): the x-coordinate stays 4, and the y-coordinate −1 becomes its negative, 1. Leaving the y-coordinate unchanged skips the reflection entirely, giving (4, −1); reflecting the x-coordinate instead, or reflecting both, mixes this up with a reflection in the y-axis or a rotation, giving (−4, −1) or (−4, 1).
10. (c) y = (5/12)x − 169/12 — The gradient of the radius to (5, −12) is (−12 − 0) ÷ (5 − 0) = −12/5. A tangent is perpendicular to the radius at that point, so its gradient is the negative reciprocal, 5/12. Using y − y₁ = m(x − x₁) with (5, −12): y + 12 = (5/12)(x − 5), which gives y = (5/12)x − 169/12. y = −(12/5)x comes from using the radius's own gradient, −12/5, instead of turning it into the perpendicular gradient, and building the line through the origin (as the radius itself does). y = −(5/12)x − 119/12 comes from taking the reciprocal of −12/5 correctly as a size but keeping the wrong sign, using −5/12 instead of 5/12. y = (5/12)x − 25/12 comes from using the correct gradient 5/12 but building the line through (5, 0) instead of (5, −12) — dropping the point's y-coordinate.
11. (b) 6 — Method: frequency density = frequency ÷ class width. Working: the class 12 ≤ h < 18 has width 18 − 12 = 6, so frequency density = 36 ÷ 6 = 6. Answer: the frequency density is 6 seedlings per cm. Watch which numbers you use: taking the lower bound, 12, as the width instead of 18 − 12 = 6 gives 36 ÷ 12 = 3; dividing the total number of seedlings, 90, rather than this class's frequency, 36, by the width gives 90 ÷ 6 = 15, a density that belongs to no single class; and multiplying instead of dividing gives 36 × 6 = 216, far too large a density for so narrow a class.
12. (a) 4/9 — Method: two steps. Find how many cars failed altogether, because the car picked is known to be one of them, then divide the diesel failures by that total. Working: 30 petrol cars and 24 diesel cars failed, so 54 cars failed. The diesel failures give 24/54, and dividing the numerator and the denominator by 6 gives 4/9. Answer: the probability is 4/9. The distractors: 3/10 is 24/80, the probability that a car fails given that it is a diesel car, which is the condition and the event swapped; 3/25 is 24/200, dividing by every car serviced that week rather than by the 54 that failed; 2/5 is 80/200, the probability that a car chosen from the whole week is a diesel car, which ignores the fact that the car picked failed.
13. (a) 2x − 1 — Swap x and y: x = (y + 1)/2. Multiply both sides by 2: 2x = y + 1. Subtract 1 from both sides: y = 2x − 1, so f⁻¹(x) = 2x − 1. Writing 2x + 1 comes from not flipping the sign on the 1 when it is moved across the equals sign. Writing (x − 1)/2 comes from reversing the sign of the 1 but leaving the ÷2 from the original rule in place, instead of turning it into ×2. Writing x/2 − 1 comes from dividing only the x by 2 and treating the 1 as already outside the fraction.
14. (b) y = −3x/4 + 25 — Method: a straight line that touches a circle at one point is a tangent there, so it is perpendicular to the radius drawn to that point; find the gradient of the radius, take its negative reciprocal, then substitute the point of contact into y − y₁ = m(x − x₁). Working: the radius from (0, 0) to (12, 16) has gradient 16 ÷ 12, which cancels to 4/3, so the tangent has gradient −3/4. Substituting gives y − 16 = −3/4(x − 12), so y − 16 = −3x/4 + 9 and y = −3x/4 + 25. Answer: y = −3x/4 + 25. The distractors: y = 3x/4 + 7 turns the gradient of the radius upside down but leaves it positive, so the perpendicular step is only half done; y = −4x/3 + 32 changes the sign of the radius gradient without turning it upside down, which is the other half left undone; y = −3x/4 − 25 uses the correct gradient but substitutes the point of contact with both signs reversed, writing y + 16 = −3/4(x + 12).
15. (a) (30, 60) — Method: a cumulative frequency point is plotted at the upper boundary of its class, paired with the running total of all the frequencies up to and including that class. Working: the running totals are 7, then 7 + 19 = 26, then 26 + 34 = 60, then 60 + 40 = 100; the class 20 ≤ t < 30 has upper boundary 30, and the running total there is 60. Answer: the point for that class is plotted at 30 seconds against a cumulative frequency of 60. The distractors: (25, 60) comes from plotting at the class midpoint, which is what a frequency polygon uses and not what a cumulative frequency diagram uses; (30, 34) comes from plotting the class frequency, 34, rather than the running total; (20, 60) comes from plotting at the lower boundary of the class, which would claim that 60 calls took less than 20 seconds when only 26 did.
16. (a) y = −2x + 3 — Method: find the step in the outputs for each step of 1 in the input — falling outputs mean a negative multiplier — then read off the output when the input is 0, because that is the number added on. Working: the outputs 5, 3, 1, −1 fall by 2 each time x rises by 1, so x is multiplied by −2; the output at x = 0 is 3, so 3 is added. Answer: y = −2x + 3, checked at x = 2 by −2 × 2 + 3 = −1. The distractors: y = 2x + 3 comes from taking the size of the step, 2, as the multiplier and ignoring the fact that the outputs are falling; y = −2x − 3 comes from using the correct multiplier but writing the number added on as −3 instead of the output 3 listed at x = 0; y = −x + 4 comes from taking the multiplier as −1, its size read from the step of 1 in the inputs instead of the step of 2 in the outputs and its sign from the fact that the outputs fall, and then fitting the number added on to the pair x = −1, y = 5.
17. (b) 143 — fg(4) means f(g(4)): work out g(4) first, then substitute the result into f. g(4) = 3 × 4 = 12, then f(12) = 12² − 1 = 144 − 1 = 143. Working out gf(4) instead swaps the order: f(4) = 4² − 1 = 15, then g(15) = 3 × 15 = 45 — that is the wrong composition. Treating f(x) as x − 1 (forgetting to square the input) gives f(12) = 12 − 1 = 11. Applying g twice instead of applying g then f gives g(g(4)) = g(12) = 3 × 12 = 36, which mixes up which function should be applied second.
18. (c) A reflection in the y-axis — Replacing x with −x reflects the graph in the y-axis: each point (x, y) maps to (−x, y). Reflecting the OUTPUT instead, y = −f(x), gives a reflection in the x-axis — that is a different function. Combining both reflections gives a rotation of 180° about the origin, and reflecting in the line y = x swaps the x- and y-values, which is what produces the inverse function, not f(−x). Check first which side of f the minus sign sits on.