🔺 Higher stretch — grade 8 and 9 topics

Answer key

1. (b) y = f(−x) — y = f(−x) reflects the graph of y = f(x) in the y-axis: every x-coordinate changes sign. The x-intercepts −3 and 7 become 3 and −7, matching the second graph's intercepts −7 and 3. A point already on the y-axis is unaffected, since −0 = 0, so the y-intercept (0, 21) stays exactly where it is — matching the second graph as well. y = −f(x) leaves the x-intercepts unchanged at −3 and 7, since f(x) = 0 exactly where −f(x) = 0, which does not match; it also sends the y-intercept to (0, −21), a second mismatch. y = −f(−x) does send the x-intercepts to the right places, −7 and 3, but it sends the y-intercept to (0, −21) instead of (0, 21), so it fails the second clue. y = f(x) − 4 moves every point down 4, sending the y-intercept to (0, 17) instead of (0, 21), so it fails the y-axis clue. Test each option against BOTH clues — the pair of x-intercepts and the point on the y-axis — because more than one option gets only one of the two right.
2. (b) 143 — fg(4) means f(g(4)): work out g(4) first, then substitute the result into f. g(4) = 3 × 4 = 12, then f(12) = 12² − 1 = 144 − 1 = 143. Working out gf(4) instead swaps the order: f(4) = 4² − 1 = 15, then g(15) = 3 × 15 = 45 — that is the wrong composition. Treating f(x) as x − 1 (forgetting to square the input) gives f(12) = 12 − 1 = 11. Applying g twice instead of applying g then f gives g(g(4)) = g(12) = 3 × 12 = 36, which mixes up which function should be applied second.
3. (d) P lies outside the circle — The squared distance from the origin to P is 8² + 9² = 64 + 81 = 145, which is greater than 100, so P lies outside the circle. Choosing 'P lies inside the circle' comes from adding the coordinates directly (8 + 9 = 17) instead of squaring and adding them, and comparing 17 with 100. Choosing 'P lies on the circle' comes from squaring 9 incorrectly as 36 (as if it were 6²) instead of 81, giving 64 + 36 = 100, equal to the right-hand side. Choosing 'Cannot be determined' wrongly assumes the equation of the line itself is needed, when the radius and the distance from the origin to P are already enough.
4. (b) xₙ₊₁ = (xₙ² + 3) ÷ 5 — Starting from x² = 5x − 3, add 3 to both sides: x² + 3 = 5x. Divide both sides by 5: x = (x² + 3) ÷ 5. Writing this as an iteration gives xₙ₊₁ = (xₙ² + 3) ÷ 5. xₙ₊₁ = (xₙ² − 3) ÷ 5 comes from a sign error when moving the −3 across the equals sign — it should become +3, not stay as −3. xₙ₊₁ = 5(xₙ² + 3) comes from multiplying by 5 instead of dividing by 5 when isolating x. xₙ₊₁ = (xₙ + 3) ÷ 5 comes from dropping the index on x², using xₙ instead of xₙ².
5. (d) −3 — Substitute y = 11 into y = 5 − 2x, giving 11 = 5 − 2x. Subtracting 5 from both sides gives 6 = −2x, so x = 6 ÷ (−2) = −3. A candidate who mishandles the negative sign when rearranging, treating the equation as 6 = 2x, gets x = 3. A candidate who correctly finds −2x = 6 but forgets to divide by 2 at all gets x = 6. A candidate who adds 5 and 11 instead of subtracting, getting 2x = 16, gets x = 8.
6. (a) 7 — Multiply the input by 2: 6 × 2 = 12. Then subtract 5: 12 − 5 = 7. A candidate who does the operations in the wrong order, subtracting 5 first and then multiplying by 2, gets (6 − 5) × 2 = 2. A candidate who only carries out the multiplication and forgets to subtract gets 12. A candidate who adds 5 instead of subtracting gets 6 × 2 + 5 = 17.
7. (d) 4x + 5 — A minus sign directly before a bracket changes the sign of both terms inside it: 6x − (2x − 5) = 6x − 2x + 5 = 4x + 5. The option 4x − 5 comes from only changing the sign of the 2x term and not the −5, giving 6x − 2x − 5. The option 8x − 5 comes from adding 2x instead of subtracting it, as if the minus sign did not apply to the bracket, giving 6x + 2x − 5. The option 8x + 5 repeats that same addition mistake and also changes the sign of the −5 term.
8. (a) 8 — f(x − 1) means every input to f is reduced by 1 before it is looked up. At x = 2, the input to f becomes 2 − 1 = 1, so f(x − 1) at x = 2 is f(1) = 8. Reading f(2) = 4 directly from the table, without applying the shift, gives 4. Shifting in the wrong direction, using x + 1 = 3 instead of x − 1 = 1, gives f(3) = 1. Confusing f(x − 1) with f(x) − 1 — taking f(2) = 4 and then subtracting 1 — gives 3.
9. (d) (−4, −3) — The combined translation is the sum of the two column vectors, added component by component: top numbers 3 + (−7) = −4, bottom numbers −5 + 2 = −3, giving (−4, −3). (10, −7) subtracts the second vector from the first instead of adding them. (−4, 3) gets the top number right but makes a sign error on the bottom, treating −5 + 2 as +3. (4, −3) gets the bottom number right but makes a sign error on the top, treating 3 + (−7) as +4.
10. (a) (6, 8) — Method: a point lies on the circle x² + y² = 100 exactly when the squares of its two coordinates add to 100, so square both coordinates of each point and add them. Working: for (6, 8), 6² + 8² = 36 + 64 = 100, which matches the right-hand side of the equation. Answer: (6, 8) lies on the circle. The distractors: (3, 4) is the 3, 4, 5 right-angled triangle recalled but never scaled up to a radius of 10, and 3² + 4² = 25, so it lies on the far smaller circle x² + y² = 25; (5, 5) has coordinates adding to 10, which compares the sum of the coordinates with the radius instead of the sum of their squares with r², and 5² + 5² = 50; (10, 10) takes each coordinate separately to equal the radius, and 10² + 10² = 200, which is twice too big.
11. (c) A reflection in the y-axis — Replacing x with −x reflects the graph in the y-axis: each point (x, y) maps to (−x, y). Reflecting the OUTPUT instead, y = −f(x), gives a reflection in the x-axis — that is a different function. Combining both reflections gives a rotation of 180° about the origin, and reflecting in the line y = x swaps the x- and y-values, which is what produces the inverse function, not f(−x). Check first which side of f the minus sign sits on.
12. (d) −2 — y = f(x) − 6 is f(x) shifted down by 6, so every y-value on the graph decreases by 6. At x = 0, f(0) = 4, so the new y-value is 4 − 6 = −2. Adding 6 instead of subtracting gives 10; writing down the shift itself, −6, or leaving the original value 4 unchanged both skip the translation altogether.
13. (c) 27 — Method: a frequency is the area of the part of the bar being asked about, so frequency = frequency density × the width of that part. Working: the part asked about runs from 20 to 35, so its width is 35 − 20 = 15 metres; the frequency density there is 1.8 per metre, so the estimate is 1.8 × 15 = 27. Answer: about 27 throws. The distractors: 72 comes from taking the whole bar, 1.8 × 40, and so counting every throw from 20 up to 60; 1.8 comes from reading the height of the bar as a frequency, when a height is a density and only an area is a count; 63 comes from using the upper value 35 as the width, 1.8 × 35, instead of the width 35 − 20.
14. (d) x = −2, x = 6; y-intercept (0, 12) — Reflecting y = f(x) in the x-axis, to get y = −f(x), negates every y-value but leaves every x-value fixed. The x-intercepts happen where y = 0, and −0 = 0, so they are unaffected: y = −f(x) still crosses the x-axis at x = −2 and x = 6. The y-intercept is the value at x = 0: f(0) = −12, so −f(0) = 12, giving the point (0, 12) — the sign flips because the y-intercept is a nonzero y-value, unlike the roots. Writing 'x = 2, x = −6; y-intercept (0, −12)' comes from confusing −f(x) with f(−x) — reflecting in the y-axis instead of the x-axis, which negates the x-values of the intercepts (turning −2 into 2 and 6 into −6) but leaves f(0) unchanged, since f(−0) = f(0) = −12. Writing 'x = −2, x = 6; y-intercept (0, −12)' comes from forgetting that −f(x) is a reflection at all, and assumes both intercepts stay exactly as they were. Writing 'x = 2, x = −6; y-intercept (0, 12)' correctly negates the y-intercept but wrongly negates the x-intercepts too, as if a reflection in the x-axis also flipped the sign of every x-value.
15. (d) −2 — Method: run the machine backwards, undoing the operations in the opposite order and swapping each one for its inverse. Working: the machine added 7 last, so take 7 off the output: 1 − 7 = −6; before that the machine had multiplied by 3, so divide: −6 ÷ 3, and a negative divided by a positive stays negative. Answer: −2, which checks because 3 × (−2) + 7 = −6 + 7 = 1. The distractors: 2 comes from dividing 6 by 3 and losing the minus sign; −6 comes from taking the 7 off and stopping there, never undoing the multiplication; −18 comes from multiplying −6 by 3 instead of dividing by 3.
16. (a) (15, 0) — Method: the tangent is perpendicular to the radius at the point of contact, so find the gradient of the radius, take its negative reciprocal, write the equation of the tangent, then substitute y = 0 because every point on the x-axis has y-coordinate 0. Working: the radius from (0, 0) to (3, 6) has gradient 6 ÷ 3 = 2, so the tangent has gradient −1/2. Substituting into y − 6 = −1/2(x − 3) gives y = −0.5x + 7.5. Setting y = 0 gives 0.5x = 7.5, so x = 15 and P is (15, 0). Answer: (15, 0). The distractors: (0, 7.5) is where the same tangent crosses the y-axis, reached by setting x = 0 instead of y = 0; (0, 0) comes from using the gradient of the radius, 2, for the tangent, which gives the line y = 2x through the centre and so crosses the x-axis at the origin; (6, 0) comes from changing the sign of the radius gradient without turning it upside down, which gives y = −2x + 12.
17. (b) 12n — Distributing the minus sign across the second bracket gives n² + 6n + 9 − n² + 6n − 9, and the n² terms and the +9/−9 cancel, leaving 6n + 6n = 12n. Writing 18 comes from only negating the first term of the second bracket, n², and treating the −6n and +9 as unchanged, which gives n² + 6n + 9 − n² − 6n + 9 = 18. Writing 2n² + 18 comes from adding the two brackets instead of subtracting them, (n² + 6n + 9) + (n² − 6n + 9) = 2n² + 18. Writing 6n comes from correctly negating the bracket but then only counting one of the two 6n terms, missing that they add rather than cancel.
18. (d) y = −2x + 10 — Method: a tangent is perpendicular to the radius drawn to the point where it touches, so work out the gradient of that radius, take its negative reciprocal for the tangent, then substitute into y − y₁ = m(x − x₁). Working: the radius joins (0, 0) to (4, 2), so its gradient is 2 ÷ 4 = 1/2; turning 1/2 upside down gives 2 and changing the sign gives −2. Substituting into y − 2 = −2(x − 4) gives y − 2 = −2x + 8, so y = −2x + 10. Answer: y = −2x + 10. The distractors: y = −0.5x + 4 changes the sign of the radius gradient but never turns it upside down, using −1/2 where −2 belongs; y = 2x − 6 turns the gradient upside down but leaves it positive, using 2 where −2 belongs; y = −2x − 10 has the correct gradient but substitutes the point with both signs reversed, writing y + 2 = −2(x + 4) instead of y − 2 = −2(x − 4).