20 questions with no calculator: the four operations, fractions, percentages, order of operations, factors and estimation.
✏️ Paper 1 non-calculator warm-up — Foundation
Paper 1 is worth exactly as much as each calculator paper, and it is the one most Foundation students practise least. This sheet is a warm-up for it: twenty questions drawn from the number and ratio statements that turn up on the non-calculator paper year after year — column arithmetic with decimals and negatives, adding and subtracting fractions, percentages of amounts, priority of operations, factors and multiples, and estimating by rounding to one significant figure. Do it with a pen and nothing else. Twenty-five minutes is about right, but do not stop early if you need longer; the point is to find out which of these have quietly gone rusty, not to score well. Mark it, then go back to the topic page for whichever one cost you the most.
- 1.A gardener has 42 tulip bulbs and 56 daffodil bulbs. She plants them in rows, with every row containing the same number of tulip bulbs and the same number of daffodil bulbs, and no bulbs left over. Work out the greatest number of rows she can plant.
- 2.Write the ratio 27 : 45 in its simplest form.
- 3.Work out (2/3)² + (1/2)². Give your answer as a fraction.
- 4.Write down a prime number between 30 and 40.
- 5.A carpenter has a plank of wood 4.8 m long. She cuts off 3 pieces, each 0.9 m long, to make shelves. Work out the length of wood remaining.
- 6.A company's turnover this year is £180,000. Last year's turnover was £120,000. Write down this year's turnover as a percentage of last year's turnover.
- 7.A number is divided by 5, then 6 is subtracted, giving the result −1. Work out the number.
- 8.Write the ratio 18:22 in its simplest form.
- 9.In a recipe the mass of chocolate to the mass of milk is in the ratio 1:4. Amelia uses 200 g of milk. Work out the mass of chocolate she needs.
- 10.Work out 15% of £40, using 10% and 5%.
- 11.Divide 84 in the ratio 3:4. Work out the smaller share.
- 12.Four students work out 6 + 2 × 3. Which student has worked it out correctly?
- 13.For any two whole numbers, the product of the numbers is equal to the product of their highest common factor and their lowest common multiple. The highest common factor of 6 and 8 is 2, and 6 × 8 = 48. Work out the lowest common multiple of 6 and 8.
- 14.Work out (−2)² − 3
- 15.The same jumper is sold at two shops. Shop A charges £40 and Shop B charges £50. Write down the price at Shop A as a percentage of the price at Shop B.
- 16.Write the ratio 8 : 15 in the form 1 : n.
- 17.A metal alloy is made from copper and tin in the ratio 7:3. Work out the mass of tin in 250 g of the alloy.
- 18.Write down the reciprocal of 0.2
- 19.A car is bought for £17,500. Its value decreases by 12% in the first year, and by a further 10% of its reduced value in the second year. Work out the value of the car at the end of the second year, giving your answer to the nearest pound.
- 20.The price of a share falls by 10% on Monday and then rises by 10% on Tuesday. Work out the overall percentage change from Monday's starting price.
Answer key
- (b) 14 — Method: the greatest number of identical rows is the highest common factor of the two bulb totals, found by taking every prime factor the two totals share. Working: 42 = 2 × 3 × 7 and 56 = 2 × 2 × 2 × 7, so the prime factors common to both are 2 and 7, giving a highest common factor of 2 × 7 = 14. 2 comes from taking only the common factor 2 and forgetting the common factor 7. 7 comes from taking only the common factor 7 and forgetting the common factor 2. 168 is the lowest common multiple of 42 and 56, not their highest common factor. Answer: 14.
- (b) 3 : 5 — The highest common factor of 27 and 45 is 9. Divide both parts by 9: 27 ÷ 9 = 3 and 45 ÷ 9 = 5, giving 3 : 5. Giving 9 : 15 divides by 3, a common factor but not the highest one, so it is not yet in simplest form. Giving 5 : 3 swaps the order of the two parts. Giving 27 : 45 has not been simplified at all.
- (c) 25/36 — Method: square a fraction by squaring its numerator and its denominator separately, then add the two results over a common denominator. Working: (2/3)² = 4/9 and (1/2)² = 1/4; the lowest common denominator of 9 and 4 is 36, so 4/9 = 16/36 and 1/4 = 9/36, and 16 + 9 = 25. Answer: 25/36. The distractors: 49/36 comes from adding the two fractions first and squaring the total, giving (7/6)²; 5/13 comes from squaring correctly but then adding the numerators and the denominators, as (4 + 1)/(9 + 4); 7/3 comes from doubling each fraction instead of squaring it, giving 4/3 + 1.
- (b) 31 — Method: a prime number has exactly two factors, 1 and itself, so check each number between 30 and 40 for other factors. Working: 3 × 11 = 33, so 33 is not prime. 2 × 17 = 34, so 34 is not prime. 4 × 9 = 36, so 36 is not prime. 31 has no factors other than 1 and 31, so it is prime. Answer: 31.
- (b) 2.1 m — The three pieces use 3 × 0.9 = 2.7 m of wood. Remaining wood = 4.8 − 2.7 = 2.1 m. A candidate who miscounts and only subtracts 2 pieces instead of 3 gets 4.8 − 1.8 = 3.0 m. A candidate who adds instead of subtracting gets 4.8 + 2.7 = 7.5 m. A candidate who gives the length used instead of the length remaining gets 2.7 m.
- (c) 150% — Percentage = (180,000 ÷ 120,000) × 100 = 150%.
- (a) 25 — Reverse the operations in reverse order: undo the subtraction by adding 6, then undo the division by multiplying by 5. −1 + 6 = 5, so the number divided by 5 equals 5, and 5 × 5 = 25 — checking, 25 ÷ 5 − 6 = 5 − 6 = −1. A candidate who subtracted 6 again instead of adding worked out −1 − 6 = −7, then −7 × 5 = −35. A candidate who multiplied by 5 before undoing the subtraction, doing the inverse operations in the wrong order, worked out −1 × 5 = −5, then −5 + 6 = 1. A candidate who multiplied by 5 but forgot to undo the subtraction at all worked out −1 × 5 = −5 and stopped there.
- (a) 9:11 — Method: divide both parts of the ratio by their highest common factor. Working: the factors of 18 are 1, 2, 3, 6, 9 and 18, and the factors of 22 are 1, 2, 11 and 22, so the highest common factor is 2; 18 ÷ 2 = 9 and 22 ÷ 2 = 11. Answer: 9:11. The distractors: 11:9 comes from dividing both parts correctly but writing them the wrong way round, so it describes 22 to 18 rather than 18 to 22; 9:22 comes from dividing only the first part by 2 and leaving the second part untouched; 9:13 comes from subtracting 9 from each part instead of dividing, since 18 − 9 = 9 and 22 − 9 = 13, and subtracting the same amount from both parts does not give an equivalent ratio.
- (d) 50 g — Method: the milk is 4 parts of the ratio, so use the milk to find the value of one part, then read off the chocolate, which is 1 part. Working: one part = 200 ÷ 4 = 50, and the chocolate is one part. Answer: 50 g. The distractors: 40 g comes from treating the 200 g as the total mass of the mixture and splitting it into 1 + 4 = 5 parts; 250 g is the total mass of the finished mixture, the 200 g of milk plus the chocolate, rather than the chocolate on its own; 800 g comes from multiplying 200 by 4 instead of dividing, which scales the milk up rather than down to the chocolate.
- (a) £6 — 10% of £40 is £4, and 5% of £40 is half of that, £2. Adding these gives 15% of £40 = £4 + £2 = £6. Finding only the 10% part and stopping there gives £4. Finding only the 5% part and stopping there gives £2. Multiplying 40 by 15 without dividing by 100 gives £600, which treats the percentage as if it were a whole number multiplier.
- (c) 36 — Add the parts of the ratio: 3 + 4 = 7. Divide the total by the number of parts: 84 ÷ 7 = 12, so one part is worth 12. The smaller share has 3 parts: 3 × 12 = 36. (48 is the larger share, using 4 parts instead of 3. 42 comes from splitting 84 in half, treating the ratio as if it were 1:1. 28 comes from dividing 84 by 3 — one of the ratio numbers — instead of dividing by the total number of parts, 7.)
- (c) Ben: 2 × 3 = 6, then 6 + 6 = 12 — Multiplication has priority over addition, so 2 × 3 = 6 is worked out first, then 6 + 6 = 12 — this is Ben's method. Amy adds 6 and 2 before multiplying: 6 + 2 = 8, then 8 × 3 = 24, breaking the priority rule. Chen multiplies the wrong pair of numbers, 6 and 2, instead of 2 and 3: 6 × 2 = 12, then 12 + 3 = 15. Dev applies the right order but slips when multiplying, using 5 instead of 6 for 2 × 3, so the final step becomes 6 + 5 = 11.
- (a) 24 — Method: rearrange the relationship so that the lowest common multiple stands alone; it is the product of the two numbers divided by their highest common factor. Working: 48 = 2 × the lowest common multiple, so the lowest common multiple is 48 ÷ 2 = 24. Checking, 24 is in the 6 times table and in the 8 times table. Answer: 24. The distractors: 48 comes from giving the product of the two numbers and never dividing by the highest common factor; 96 comes from multiplying by the highest common factor instead of dividing by it; 12 comes from dividing by the highest common factor twice, once for each of the two numbers.
- (b) 1 — Method: BIDMAS deals with the index before the subtraction, and a negative number multiplied by itself gives a positive result. Working: (−2)² = (−2) × (−2) = 4, so the calculation becomes 4 − 3 = 1. Answer: 1. The distractors: −7 comes from squaring only the 2 and leaving the minus sign outside the index, giving −(2²) − 3 = −4 − 3 = −7; −1 comes from subtracting the square from 3 instead of 3 from the square, giving 3 − 4 = −1; 25 comes from carrying out the subtraction before the index, giving (−2 − 3)² = (−5)² = 25.
- (b) 80% — Percentage = (40 ÷ 50) × 100 = 80%.
- (b) 1 : 1.875 — To write a ratio in the form 1 : n, divide both parts by the first part, 8: 8 ÷ 8 = 1 and 15 ÷ 8 = 1.875, giving 1 : 1.875. Giving 1 : 0.53 divides the wrong way round, computing 8 ÷ 15 instead of 15 ÷ 8. Giving 1.875 : 1 has the two parts of the answer swapped, which is the form n : 1, not 1 : n. Giving 8 : 1.875 divides only the second part by 8, so the first part is still 8, not 1.
- (b) 75 g — Method: split the total mass into the number of parts shown by the ratio, then find the mass of tin. Working: the ratio 7:3 has 7 + 3 = 10 parts, so one part is 250 ÷ 10 = 25 g, and the mass of tin is 3 × 25 = 75 g. So the alloy contains 75 g of tin. Distractor 175 g is the mass of copper, not tin. Distractor 125 g comes from splitting the alloy into two equal halves, ignoring the ratio. Distractor 25 g is the value of one part, found correctly but never multiplied by 3.
- (c) 5 — 0.2 = 1/5, and turning the fraction upside down gives the reciprocal 5/1 = 5. Writing −0.2 mistakes the reciprocal for the negative of the number. Working out 1 − 0.2 = 0.8 mistakes the reciprocal for subtracting the number from 1. Writing 0.5 is the reciprocal of 2, not of 0.2 — a place-value slip that drops the decimal, since 1 ÷ 0.2 = 5 while 1 ÷ 2 = 0.5.
- (b) £13,860 — Method: apply the first year's percentage decrease, then apply the second year's percentage decrease to the new value. Working: after the first year, the car is worth £17,500 × 0.88. Multiplying this result by 0.90 gives the value at the end of the second year, £13,860. Answer: £13,860. £13,650 comes from adding the two percentages together (12% + 10% = 22%) and applying a single 22% decrease, £17,500 × 0.78 = £13,650, instead of applying the decreases one after the other. £15,750 comes from applying only the second year's 10% decrease to the original price, forgetting the first year's decrease entirely, £17,500 × 0.90 = £15,750. £15,400 comes from applying only the first year's 12% decrease and stopping there, forgetting to apply the second year's decrease at all.
- (b) −1% — Method: write each change as a multiplier and multiply them. A 10% fall is × 0.9 and a 10% rise is × 1.1. Working: 0.9 × 1.1 = 0.99, so the final price is 99% of the original, which is 1% less. Answer: an overall change of −1%. The distractors: 0% comes from assuming a 10% fall and a 10% rise cancel — they do not, because the rise is 10% of a smaller amount; +1% has the size right but the sign wrong, from reading the multiplier 0.99 as 1% above 1 instead of 1% below it; −2% comes from finding the 1% fall and then counting it once for each of the two changes.
What is on this worksheet?
The sheet holds 20 questions drawn from the MathsUK bank — the content areas covered: Number, Ratio, proportion and rates of change (statements N2, N3, N4, N10, N12, N14, R4, R5, R9). It is pitched at GCSE Foundation and takes about 25 minutes to work through in full. It is built for independent practice, with full answers at the end for self-marking.
How to use the sheet well
- Print it or open it on screen — both work. Printing is A4; the screen view fits phones and tablets.
- Do all 20 questions before checking — about 25 minutes is the guide, but there is no time pressure.
- Check the answers — press “Show answers” or print the answer page separately.
- Redo the questions you got wrong — twice as effective as doing 20 fresh ones.
- “New questions” — builds a fresh sheet on the same statements, so you can practise again without repeats.
Why this sheet helps
MathsUK worksheets use questions graded by difficulty and a fair spread of correct-answer positions (the answer is not always (a)) — so the student really has to think about each question rather than guess a pattern. Every question is tagged to a DfE content statement and checked before it enters the bank. The answers come with a step-by-step explanation, not just a value — so a wrong answer becomes a lesson.
Similar worksheets worth a look
- 🧮 Paper 1 non-calculator warm-up — Higher · 20 questions · ~25 min
- 🎯 Grade 4 pass booster · 25 questions · ~40 min
- ⚖️ Foundation to Higher crossover check · 20 questions · ~35 min
- 💷 Percentages and compound interest · 22 questions · ~40 min