✏️ Paper 1 non-calculator warm-up — Foundation

Answer key

1. (a) 3/8, 41%, 0.43 — Method: convert every value to a decimal so they can be compared on the same scale, then order them. Working: 3/8 = 0.375, 41% = 0.41, and 0.43 stays as 0.43, so from smallest to largest the decimals are 0.375, 0.41, 0.43, giving the order 3/8, 41%, 0.43. Answer: 3/8, 41%, 0.43. The order 3/8, 0.43, 41% comes from comparing 0.43 and 41% as raw digits (43 versus 41) without converting 41% into the decimal 0.41 first, wrongly placing 0.43 before 41%. The order 0.43, 41%, 3/8 comes from placing the values in completely reversed order, from largest to smallest instead of smallest to largest. The order 41%, 0.43, 3/8 comes from ordering the values by their TYPE (percentage, then decimal, then fraction) rather than by their actual size.
2. (b) 400 — Method: round each number to the nearest 100, then subtract the rounded values. Working: 812 rounds to 800 (nearest 100) and 397 rounds to 400 (nearest 100). 800 − 400 = 400. Answer: 400. 500 comes from rounding 397 down to 300 instead of up to the nearest 100, 400. 300 comes from rounding 812 down to 700 instead of up to the nearest 100, 800. 415 is the exact value of 812 − 397, found without rounding first, so it is not an estimate — the spreadsheet's answer of 315 is too far from the estimate of 400 to be correct.
3. (b) 5:8 — The mix has 5 parts sand and 3 parts cement, so 5 + 3 = 8 parts in total. Sand to total is 5 : 8, and since the highest common factor of 5 and 8 is 1, this is already in its simplest form. Giving 5 : 3 answers sand to cement, not sand to the total mix. Giving 3 : 8 is cement to total, the wrong part of the mix. Giving 8 : 5 has the total and the sand swapped round.
4. (a) 7 — Dividing by 0.1 is the same as multiplying by 10, so 0.7 ÷ 0.1 = 7. Meera's answer of 0.07 comes from dividing 0.7 by 10 instead of by 0.1, the wrong way round. A candidate who confuses 0.1 with 0.01 multiplies by 100 instead of 10 and gets 70. A candidate who thinks dividing by a number less than 1 does not change the value gets 0.7.
5. (a) 75% — Method: to express one quantity as a percentage of another, divide the part by the whole and multiply by 100. Working: 18 ÷ 24 = 0.75, and 0.75 × 100 = 75. Answer: 75%. The distractors: 25% is the percentage she got wrong, 6 out of 24; 133% comes from dividing the whole by the part, 24 ÷ 18; 18% comes from writing the number of correct answers with a percent sign.
6. (c) 12 m — Method: the perimeter of a rectangle is twice the sum of the length and the width, so half the perimeter is one length plus one width; split that half using the ratio. Working: half of 64 is 64 ÷ 2 = 32 m, the ratio 5:3 has 5 + 3 = 8 parts, so one part is 32 ÷ 8 = 4 m, and the width is 3 × 4 = 12 m. So the width is 12 m. Distractor 20 m is the length, 5 parts, not the width. Distractor 24 m comes from splitting the whole perimeter, 64 m, into 8 parts and multiplying by 3, forgetting to halve the perimeter first. Distractor 8 m comes from the same slip stopped one step earlier: splitting the whole perimeter into 8 parts, 64 ÷ 8 = 8, and giving that instead of the width.
7. (d) 31, which is prime — Method: work out the value, remembering that multiplication comes before addition, then test it for primality by dividing by each prime up to its square root. Working: 2 × 3 × 5 = 30, so the value is 30 + 1 = 31. Since 6² = 36 is larger than 31, only 2, 3 and 5 need testing: 31 is odd, 31 ÷ 3 leaves a remainder of 1, and 31 does not end in 0 or 5. It therefore has exactly two factors, 1 and itself. Answer: 31, which is prime. The distractors: 30, which is not prime comes from working out 2 × 3 × 5 and forgetting to add the 1; the claim that 31 = 1 × 31 makes it non-prime comes from treating any factor pair as proof, forgetting that a prime is allowed the pair 1 and itself; the claim that 31 is a multiple of 3 comes from assuming that a number containing the digit 3 divides by 3, when in fact 31 ÷ 3 leaves a remainder.
8. (b) £60 — £48 represents 100% − 20% = 80% of the original price. 1% = £48 ÷ 80 = £0.60, so 100% = £0.60 × 100 = £60.
9. (d) £5.40 — Method: work out the reduced price at each shop separately, then subtract the smaller from the larger. Working: Shop A's reduced price is £45 × 0.8 = £36, and Shop B's reduced price is £34 × 0.9 = £30.60, so the difference is £36 − £30.60 = £5.40. Answer: £5.40. £11.00 comes from comparing the two ORIGINAL prices, £45 − £34, without applying either shop's reduction at all. £1.60 comes from finding Shop A's reduced price correctly, £36, but then subtracting Shop B's original (unreduced) price of £34 instead of its reduced price. £66.60 comes from adding the two reduced prices together, £36 + £30.60, instead of subtracting them.
10. (d) 2³ × 5² — Method: divide repeatedly by the smallest prime number, then write any repeated prime using a power. Working: 200 ÷ 2 = 100, 100 ÷ 2 = 50, 50 ÷ 2 = 25, 25 ÷ 5 = 5, and 5 is prime, so 200 = 2 × 2 × 2 × 5 × 5, written as 2³ × 5². 2² × 5³ swaps the two powers, giving 4 × 125 = 500, not 200. 2³ × 5 leaves out one of the two 5s, giving 8 × 5 = 40, not 200. 2 × 5³ leaves out two of the three 2s, giving 2 × 125 = 250, not 200. Answer: 2³ × 5².
11. (c) 21% — Method: an increase of 10% is a multiplier of 1.1, and two successive increases are found by multiplying the multipliers. Working: 1.1 × 1.1 = 1.21, so the rent is 121% of the original, which is an increase of 21%. Answer: 21%. The distractors: 20% comes from adding the two percentages, which ignores that the second 10% is taken of a larger amount; 121% is the multiplier written as the change rather than the change itself; 11% comes from slipping in the multiplication and getting 1.11 instead of 1.21.
12. (a) 14 — Brackets first: 9 − 6 = 3. Then multiply: 3 × 3 = 9. Then add: 5 + 9 = 14. So the answer is 14. A candidate who worked out (5 + 3) × (9 − 6) = 8 × 3 = 24 added before multiplying, ignoring the priority of operations outside the bracket. A candidate who dropped the brackets and worked out 5 + 3 × 9 − 6 = 5 + 27 − 6 = 26 multiplied by the 9 itself instead of by the bracket's value of 3, losing the grouping the brackets give. A candidate who forgot to add the 5 and only worked out 3 × (9 − 6) = 3 × 3 = 9 dropped a term from the calculation.
13. (d) 1/4 — Method: count the digits after the decimal point to choose a denominator that is a power of ten, then cancel the fraction by the highest common factor of the numerator and the denominator. Working: 0.25 has two digits after the point, so 0.25 is 25 hundredths and can be written as 25/100; the highest common factor of 25 and 100 is 25, and 25 ÷ 25 = 1 with 100 ÷ 25 = 4. Answer: 1/4. The distractors: 2/5 comes from reading the two digits after the point as a numerator and a denominator and writing 2 over 5; 1/25 comes from putting 1 over the digits after the point, as though 0.25 meant one twenty-fifth; 1/40 comes from miscounting the decimal places and using a denominator of 1000, giving 25/1000, which cancels by 25 to 1/40.
14. (c) 5/8 — Method: write the decimal over 1000 using its three decimal places, then simplify. Working: 0.625 = 625/1000 = 5/8 (dividing both numerator and denominator by 125). Answer: 5/8. 25/4 comes from writing the decimal over 100 instead of 1000, as if there were only two decimal places. 31/50 comes from rounding 0.625 to 0.62 before converting. 8/5 comes from simplifying correctly to 5/8 and then writing the fraction upside down.
15. (d) 7:15 — Method: write the two parts in the order asked for, red first, then divide both parts by their highest common factor. Working: the factors of 7 are 1 and 7, and the factors of 15 are 1, 3, 5 and 15, so the only common factor is 1; dividing both parts by 1 leaves both counts unchanged. Answer: 7:15, which is already in its simplest form. The distractors: 15:7 is the ratio of blue to red, the reverse of the order the question asks for; 7:5 comes from cancelling the digit 1 out of 15, which is not a division by a common factor; 1:2 comes from dividing 15 by 7, rounding the result to 2 and writing the ratio as 1 to 2, but 7 is not a factor of 15 so that division is not exact.
16. (a) 1/16 — Method: terms can only be subtracted once they share a denominator, so write every term over the largest denominator, 16, and then subtract the numerators in order from left to right. Working: 1 = 16/16, 1/2 = 8/16, 1/4 = 4/16 and 1/8 = 2/16, so the numerators give 16 − 8 − 4 − 2 − 1 = 1, over a denominator of 16. Answer: 1/16. The distractors: 1/8 comes from stopping one term early, after 16 − 8 − 4 − 2 = 2; 3/16 comes from a sign slip on the last term, adding it instead of subtracting it, which gives 2 + 1 = 3; 15/16 comes from working from the right-hand end as though the last four terms were bracketed together, so that only a single sixteenth is taken away from 1.
17. (d) £200 — Method: add the parts of the ratio, divide the total paid by the number of parts to find the value of one part, then multiply by the parts in the most expensive item. Working: 2 + 3 + 5 = 10 parts, £400 ÷ 10 = £40 for one part, and the most expensive item is 5 parts, so 5 × £40 = £200. Answer: £200. The distractors: £40 is the value of one part; £80 is the 2-part item, the cheapest of the three; £120 is the 3-part item.
18. (b) 18 — Method: multiply the two numbers ignoring their signs, then apply the rule that a negative number multiplied by a negative number gives a positive answer. Working: 6 × 3 = 18; since both −6 and −3 are negative, the product is positive. Answer: 18. −18 comes from keeping the answer negative, as if only one of the two negative signs affects the sign of the product. −9 comes from adding the two numbers instead of multiplying them, −6 + (−3) = −9. 9 comes from adding 6 and 3 as if both numbers were positive, ignoring the negative signs entirely.
19. (a) 12 — Compare the powers of each prime that appears in both factorisations. In 2² × 3² and 2² × 3 × 7, the prime 2 appears with power 2 in both, and the prime 3 appears with power 2 in one and only power 1 in the other — take the lower power, 3¹. Multiplying the shared primes at their lower powers, 2² × 3, gives 12. Using power 1 for both primes instead of comparing the powers properly, 2 × 3, gives 6, which misses that 2 is common at power 2, not power 1. Multiplying the primes at their higher powers and including 7, which only appears in 84, gives 2² × 3² × 7, which comes to 252 — this is the lowest common multiple, not the highest common factor. Only spotting that 3 is a common prime and overlooking that 2 is common as well gives 3. So the highest common factor of 36 and 84 is 12.
20. (c) 0.024 — Multiply the digits ignoring the decimal points: 6 × 4 = 24. Count the total number of decimal places in the two numbers being multiplied: 0.6 has 1 decimal place and 0.04 has 2, giving 3 in total. Place the decimal point in 24 so that there are 3 digits after it: 0.024. Counting only 2 decimal places instead of 3 gives 0.24. Counting 4 decimal places instead of 3 gives 0.0024. Counting only 1 decimal place instead of 3 — in effect moving the point in just one of the two numbers, as if the calculation were 6 × 0.4 — gives 2.4. So 0.6 × 0.04 = 0.024.