✏️ Paper 1 non-calculator warm-up — Foundation

Answer key

1. (a) 5 — Method: each index is worked out first, and subtracting a negative number is the same as adding the positive. Working: (−2)³ = (−2) × (−2) × (−2) = −8 and (−3)² = (−3) × (−3) = 9, while − (−4) becomes + 4, so the calculation becomes −8 + 9 + 4 = 5. Answer: 5. The distractors: −13 comes from taking (−3)² as −9, giving −8 − 9 + 4 = −13; −3 comes from reading − (−4) as − 4, giving −8 + 9 − 4 = −3; 21 comes from treating every power of a negative number as positive, so that (−2)³ is taken as 8 and the calculation becomes 8 + 9 + 4 = 21.
2. (a) 9/20 — Method: write the decimal over 100 using its two decimal places, then simplify. Working: 0.45 = 45/100 = 9/20 (dividing both numerator and denominator by 5). Answer: 9/20. 9/100 comes from dividing only the numerator by 5 and leaving the denominator as 100. 9/2 comes from writing the decimal over 10 instead of 100, as if there were only one decimal place, then simplifying 45/10. 9/200 comes from writing the decimal over 1000 instead of 100, as if there were three decimal places, then simplifying 45/1000.
3. (a) 30 cm — The tile's side length must be a common factor of 90 and 120. The factors of 90 include 1, 2, 3, 5, 6, 9, 10, 15, 18, 30, 45, 90; the factors of 120 include 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 20, 24, 30, 40, 60, 120. The highest number common to both lists is 30, so the largest square tile has a side length of 30 cm. Picking 15 cm, a common factor but not the largest, gives tiles that are smaller than necessary. Picking 10 cm, also a common factor but smaller still, wastes even more of the possible tile size. Working out the lowest common multiple instead of the highest common factor gives 360 cm, a length far bigger than either side of the patio. So the largest square tile Ben can use has a side length of 30 cm.
4. (d) 2:3:5 — The highest common factor of 12, 18 and 30 is 6. Divide every part by 6: 12 ÷ 6 = 2, 18 ÷ 6 = 3, 30 ÷ 6 = 5, giving 2 : 3 : 5. Dividing by 2 instead of 6 gives 6 : 9 : 15, which still shares a common factor of 3, so it is not fully simplified. Dividing by 3 instead of 6 gives 4 : 6 : 10, which still shares a common factor of 2, so it is not fully simplified either. Swapping the first two parts gives 3 : 2 : 5, the parts in the wrong order.
5. (d) £20 — 1% of £250 = £2.50, so 8% = 8 × £2.50 = £20. A candidate who misplaces the decimal point and finds 0.8% instead gets £2. A candidate who confuses 8% with 80% gets £200. A candidate who rounds 8% up to the nearby 10% gets £25.
6. (d) 3 : 8 — Multiply both parts by 4 to clear the decimal: 0.75 × 4 = 3 and 2 × 4 = 8, giving 3 : 8, which has no common factor other than 1. Giving 75 : 200 multiplies by 100 instead of 4, and has not then been simplified down to 3 : 8. Giving 0.75 : 2 has not been converted into whole numbers at all. Giving 3 : 2 converts the first part correctly but leaves the second part unscaled.
7. (c) 0.36 — Method: convert the fraction to an equivalent fraction with denominator 100, then read off the decimal. Working: 9/25 = 36/100 (multiplying numerator and denominator by 4) = 0.36. Answer: 0.36. 2.8 comes from flipping the fraction and dividing the denominator by the numerator instead: 25 ÷ 9 = 2.77…, rounded to 2.8. 0.925 comes from writing the digits of the numerator and denominator directly after the decimal point without scaling the fraction. 0.9 comes from writing the numerator straight after the decimal point, as if the denominator were 10 rather than 25.
8. (c) 1,000 m² — Method: round each length to 1 significant figure, then use area of a rectangle = length × width on the rounded lengths. Working: 19.6 m rounds to 20 m and 48.3 m rounds to 50 m, so the estimate is 20 × 50 = 1,000 and the area is about 1,000 m². Answer: 1,000 m². The distractors: 800 m² comes from rounding 48.3 down to 40 when the digit after its first significant figure is 8 and sends it up to 50, giving 20 × 40 = 800; 140 m² is the perimeter of the rounded rectangle, 2 × 20 + 2 × 50 = 140, not its area; 70 m² comes from adding the rounded lengths, 20 + 50 = 70, instead of multiplying them.
9. (a) 6 — Method: list the factors of each number and compare them. Working: the factors of 18 are 1, 2, 3, 6, 9, 18; the factors of 24 are 1, 2, 3, 4, 6, 8, 12, 24. The only option that appears in both lists is 6. 8 is a factor of 24 but not of 18. 9 is a factor of 18 but not of 24. 12 is a factor of 24 but not of 18. Answer: 6.
10. (a) 8:1 — Multiply both parts of the ratio by 4 to clear the fraction: 2 × 4 = 8 and 1/4 × 4 = 1, giving 8 : 1. Getting 1 : 8 has the two parts the wrong way round. Getting 2 : 4 comes from writing down the denominator of the fraction (4) as the second part instead of multiplying through by it. Getting 8 : 4 comes from multiplying only the first part of the ratio by 4 and leaving the second part as the fraction's denominator.
11. (a) £18 — Method: the percentage acts as an operator on the bill, and 15% can be built from 10% and 5%, where 5% is half of 10%. Working: 10% of £120 is £120 ÷ 10 = £12, and 5% is half of that, £6, so the charge is £12 + £6 = £18. Answer: £18. The distractors: £8 comes from reading 15% as one fifteenth and working out £120 ÷ 15 = £8; £12 comes from finding 10% of the bill and stopping there; £138 comes from finding the charge correctly and then giving the new total, £120 + £18, rather than the charge the question asks for.
12. (a) 0.35, 3/8, 0.4 — Method: convert the fraction to a decimal so all three values can be compared directly. Working: 3/8 = 0.375, so the three values are 0.35, 0.375 and 0.4. In order from smallest to largest: 0.35, 3/8 (0.375), 0.4. Answer: 0.35, 3/8, 0.4. "3/8, 0.35, 0.4" comes from assuming a fraction must be smaller than any decimal, without converting it first. "0.4, 3/8, 0.35" comes from writing the numbers in reverse order. "0.35, 0.4, 3/8" comes from converting 3/8 by flipping it to 8/3, making it seem larger than both decimals.
13. (b) £52,000 — Method: convert 130% to a decimal multiplier and multiply it by last year's profit. Working: 130% = 1.3, so this year's profit is £40,000 × 1.3 = £52,000. Answer: £52,000. £12,000 comes from using only the extra 30% (130% − 100%) and forgetting to include the original 100%, £40,000 × 0.3 = £12,000. £40,130 comes from simply adding 130 onto £40,000, treating the percentage as an amount of money rather than a multiplier. £5,200 comes from misreading 130% as 13%, giving £40,000 × 0.13 = £5,200.
14. (b) £13,860 — Method: apply the first year's percentage decrease, then apply the second year's percentage decrease to the new value. Working: after the first year, the car is worth £17,500 × 0.88. Multiplying this result by 0.90 gives the value at the end of the second year, £13,860. Answer: £13,860. £13,650 comes from adding the two percentages together (12% + 10% = 22%) and applying a single 22% decrease, £17,500 × 0.78 = £13,650, instead of applying the decreases one after the other. £15,750 comes from applying only the second year's 10% decrease to the original price, forgetting the first year's decrease entirely, £17,500 × 0.90 = £15,750. £15,400 comes from applying only the first year's 12% decrease and stopping there, forgetting to apply the second year's decrease at all.
15. (c) 280 — Method: round each number to 1 significant figure, then multiply the rounded numbers. Working: 6.8 rounds to 7 because the next digit is 8, and 41 rounds to 40 because its next digit is 1, so the estimate is 7 × 40 = 280. Answer: 280. The distractors: 240 comes from cutting 6.8 down to 6 instead of rounding it up to 7, giving 6 × 40 = 240; 350 comes from rounding 41 up to 50 when the digit after its first significant figure is less than 5, giving 7 × 50 = 350; 28 comes from multiplying the leading digits only and losing the place value of the 40, which makes the estimate ten times too small.
16. (c) 40 cm — Method: split the total length into the number of parts shown by the ratio, then find the value of the shorter share. Working: the ratio 4:5 has 4 + 5 = 9 parts, so one part is 90 ÷ 9 = 10 cm, and the shorter piece is 4 × 10 = 40 cm. So the shorter piece is 40 cm. Distractor 50 cm is the length of the LONGER piece, not the shorter one. Distractor 45 cm comes from splitting the ribbon into two equal halves, ignoring the ratio. Distractor 10 cm is the value of one part, found correctly but never multiplied by 4.
17. (c) £80 — Method: a unit fraction acts as an operator, so finding 1/9 of a price means dividing that price by 9. Working: £720 ÷ 9 = £80. Answer: £80. The distractors: £6480 comes from multiplying by the denominator instead of dividing by it, giving £720 × 9 = £6480; £640 comes from working out what is left of the £720 once the case is paid for, £720 − £80, instead of the cost of the case itself; £72 comes from dividing by 10 instead of 9, treating one ninth as one tenth.
18. (d) £5.40 — Method: work out the reduced price at each shop separately, then subtract the smaller from the larger. Working: Shop A's reduced price is £45 × 0.8 = £36, and Shop B's reduced price is £34 × 0.9 = £30.60, so the difference is £36 − £30.60 = £5.40. Answer: £5.40. £11.00 comes from comparing the two ORIGINAL prices, £45 − £34, without applying either shop's reduction at all. £1.60 comes from finding Shop A's reduced price correctly, £36, but then subtracting Shop B's original (unreduced) price of £34 instead of its reduced price. £66.60 comes from adding the two reduced prices together, £36 + £30.60, instead of subtracting them.
19. (d) 2:3 — The highest common factor of 20 and 30 is 10. Divide both parts of the ratio by 10: 20 ÷ 10 = 2 and 30 ÷ 10 = 3, so 20 : 30 = 2 : 3. Dividing by 5 instead of the highest common factor gives 4 : 6, which still shares a common factor of 2, so it is not fully simplified. Dividing only the first part by 10 and leaving the second part unchanged gives 2 : 30, which is not equivalent to the original ratio. Swapping the order of the two parts gives 3 : 2, the ratio the wrong way round.
20. (a) 0.625 — Method: convert the fraction to a decimal so it can be compared properly with 0.6. Working: 5/8 = 0.625, and since 0.625 > 0.6, the larger value is 0.625. Answer: 0.625. 0.6 repeats Sam's incorrect claim, made by comparing single digits rather than full place value. 0.58 comes from converting 5/8 incorrectly, treating it as if it read 5 tenths and 8 hundredths. 0.85 comes from turning the fraction upside down and writing its digits straight after the decimal point, 8 then 5, instead of dividing.