✏️ Paper 1 non-calculator warm-up — Foundation

Answer key

1. (d) 25% — Method: to convert a decimal to a percentage, multiply by 100. Working: 0.25 × 100 = 25. Answer: 25%. The distractors: 0.25% comes from writing a percent sign after the decimal without multiplying; 2.5% comes from multiplying by 10 instead of 100; 250% comes from multiplying by 1000.
2. (d) £120 — Method: add the parts of the ratio, divide the prize by the number of parts to find the value of one part, then multiply by the parts in the share asked for. Working: 2 + 3 + 4 = 9 parts, £360 ÷ 9 = £40 for one part, and the share asked for is 3 parts, so 3 × £40 = £120. Answer: £120. The distractors: £40 is the value of one part rather than of a 3-part share; £80 is the 2-part share; £160 is the 4-part share, which is what a candidate reaches by picking the largest share instead of the one the question names.
3. (a) 12 — Compare the powers of each prime that appears in both factorisations. In 2² × 3² and 2² × 3 × 7, the prime 2 appears with power 2 in both, and the prime 3 appears with power 2 in one and only power 1 in the other — take the lower power, 3¹. Multiplying the shared primes at their lower powers, 2² × 3, gives 12. Using power 1 for both primes instead of comparing the powers properly, 2 × 3, gives 6, which misses that 2 is common at power 2, not power 1. Multiplying the primes at their higher powers and including 7, which only appears in 84, gives 2² × 3² × 7, which comes to 252 — this is the lowest common multiple, not the highest common factor. Only spotting that 3 is a common prime and overlooking that 2 is common as well gives 3. So the highest common factor of 36 and 84 is 12.
4. (a) 35 — Method: 25% is 25/100, which cancels to 1/4, so finding 25% of an amount means dividing it by 4. Working: 25% = 25/100 = 1/4, and 140 ÷ 4 = 35. Answer: 35 pens. The distractors: 70 comes from halving instead of quartering, confusing 25% with 50%; 105 comes from working out the pens that are not red, which is 75% of 140, instead of the pens that are; 25 comes from ignoring the percent sign and reading the 25% as a count of 25 pens.
5. (b) £13,860 — Method: apply the first year's percentage decrease, then apply the second year's percentage decrease to the new value. Working: after the first year, the car is worth £17,500 × 0.88. Multiplying this result by 0.90 gives the value at the end of the second year, £13,860. Answer: £13,860. £13,650 comes from adding the two percentages together (12% + 10% = 22%) and applying a single 22% decrease, £17,500 × 0.78 = £13,650, instead of applying the decreases one after the other. £15,750 comes from applying only the second year's 10% decrease to the original price, forgetting the first year's decrease entirely, £17,500 × 0.90 = £15,750. £15,400 comes from applying only the first year's 12% decrease and stopping there, forgetting to apply the second year's decrease at all.
6. (b) 12 — Method: round the number of pupils to the nearest 10, divide by the number of passengers each minibus can carry, then round up because a part-full minibus still needs a whole vehicle. Working: 179 rounds to 180 (nearest 10); 180 ÷ 16 = 11.25; 11 minibuses only carry 176 passengers, so a 12th minibus is needed for the rest. Answer: 12. 11 comes from rounding 11.25 to the nearest whole number in the usual way, without checking that the leftover pupils still need transporting. 10 comes from rounding 179 down to 170 instead of to the nearest 10, 180. 180 comes from stopping after rounding the number of pupils, without dividing by the number of passengers each minibus carries at all.
7. (a) 9 °C — Method: the fall is the difference between the two readings, so subtract the lower reading from the higher one; subtracting a negative number is the same as adding its positive. Working: 3 − (−6) = 3 + 6 = 9. Counting it out, the temperature drops 3 degrees to reach zero and a further 6 degrees below zero. Answer: 9 °C. The distractors: −9 °C comes from subtracting the readings the wrong way round, as −6 − 3, and reporting a fall as a negative amount; 3 °C comes from ignoring the minus sign and working out 6 − 3; 6 °C comes from counting only the part of the fall that happens below zero and forgetting the 3 degrees above it.
8. (d) 140 — Method: round each number to the nearest 10, then add the rounded values. Working: 89 rounds to 90 (nearest 10) and 52 rounds to 50 (nearest 10). 90 + 50 = 140. Answer: 140. 141 is the exact value of 89 + 52, found without rounding first, so it is not an estimate. 130 comes from rounding 89 down to 80 instead of up to the nearest 10, 90. 150 comes from rounding 52 up to 60 instead of down to the nearest 10, 50.
9. (a) 20% — Method: percentage increase = increase ÷ original amount × 100. Working: the increase is 84 − 70 = 14 marks, and 14 ÷ 70 = 0.2, so 0.2 × 100 = 20. Answer: an increase of 20%. The distractors: 14% comes from quoting the 14 mark increase as though marks and per cent were the same thing; 17% comes from dividing the 14 by the new mean 84 instead of by the original 70, which gives 17% to the nearest per cent; 120% is the new mean written as a percentage of the old one, which is the whole of the new mean rather than the increase.
10. (a) 9/20 — Method: write the decimal over 100 using its two decimal places, then simplify. Working: 0.45 = 45/100 = 9/20 (dividing both numerator and denominator by 5). Answer: 9/20. 9/100 comes from dividing only the numerator by 5 and leaving the denominator as 100. 9/2 comes from writing the decimal over 10 instead of 100, as if there were only one decimal place, then simplifying 45/10. 9/200 comes from writing the decimal over 1000 instead of 100, as if there were three decimal places, then simplifying 45/1000.
11. (b) 31 — Method: a prime number has exactly two factors, 1 and itself, so check each number between 30 and 40 for other factors. Working: 3 × 11 = 33, so 33 is not prime. 2 × 17 = 34, so 34 is not prime. 4 × 9 = 36, so 36 is not prime. 31 has no factors other than 1 and 31, so it is prime. Answer: 31.
12. (a) 18 minutes — Method: the buses leave together again after a number of minutes that is a multiple of both intervals, and the first such time is the lowest common multiple. Working: the multiples of 6 are 6, 12, 18, 24 … and the multiples of 9 are 9, 18, 27 … The first value in both lists is 18, which is 6 × 3 and 9 × 2. Answer: 18 minutes. The distractors: 54 minutes comes from multiplying 6 by 9, which does give a common multiple but not the lowest one; 3 minutes is the highest common factor of 6 and 9 rather than their lowest common multiple; 15 minutes comes from adding the two intervals together.
13. (b) 3/50 — Method: write the decimal over the power of ten that matches the number of digits after the point, counting every digit including a zero, then divide the numerator and the denominator by their highest common factor. Working: 0.06 has two digits after the point, so it is 6 hundredths and can be written as 6/100; the highest common factor of 6 and 100 is 2, and 6 ÷ 2 = 3 with 100 ÷ 2 = 50. Answer: 3/50. The distractors: 3/5 comes from ignoring the zero straight after the point and converting 0.6 instead, giving 6/10, which cancels to 3/5; 3/500 comes from counting three decimal places instead of two and writing 6/1000, which cancels to 3/500; 1/6 comes from putting 1 over the digits after the point, as though 0.06 meant one sixth.
14. (c) 87 litres — Work out how much water is drained: 8 × 6 = 48 litres. Subtract this from the starting amount: 120 − 48 = 72 litres. Then add the 15 litres from the hose: 72 + 15 = 87 litres. Subtracting the 15 litres instead of adding it, as though the hose also removed water, gives 120 − 48 − 15 = 57 litres. Stopping after the drain step, without adding the hose water back in, leaves the working at 72 litres. Adding the rate and the time instead of multiplying them, 8 + 6 = 14 litres drained, and then working from there gives 120 − 14 + 15 = 121 litres. So 87 litres of water is left in the tank.
15. (b) 88.8 — Multiply as whole numbers first, ignoring the decimal point: 37 × 24. Split it as 37 × 20 = 740 and 37 × 4 = 148, so 37 × 24 = 740 + 148 = 888. 3.7 has 1 decimal place and 24 has none, so the answer needs 1 decimal place: 88.8. Counting the 2 digits in "3.7" as though that were the number of decimal places gives 8.88 instead of 1 decimal place. Leaving the decimal point out altogether gives 888. Misreading 37 × 4 as 138 rather than 148 gives a running total of 878, placed with 1 decimal place as 87.8. So 3.7 × 24 = 88.8.
16. (c) 5 — 0.2 = 1/5, and turning the fraction upside down gives the reciprocal 5/1 = 5. Writing −0.2 mistakes the reciprocal for the negative of the number. Working out 1 − 0.2 = 0.8 mistakes the reciprocal for subtracting the number from 1. Writing 0.5 is the reciprocal of 2, not of 0.2 — a place-value slip that drops the decimal, since 1 ÷ 0.2 = 5 while 1 ÷ 2 = 0.5.
17. (b) 75 g — Method: split the total mass into the number of parts shown by the ratio, then find the mass of tin. Working: the ratio 7:3 has 7 + 3 = 10 parts, so one part is 250 ÷ 10 = 25 g, and the mass of tin is 3 × 25 = 75 g. So the alloy contains 75 g of tin. Distractor 175 g is the mass of copper, not tin. Distractor 125 g comes from splitting the alloy into two equal halves, ignoring the ratio. Distractor 25 g is the value of one part, found correctly but never multiplied by 3.
18. (c) 9 — Method: factors come in pairs that multiply to give the number, so work through the pairs in order; a factor paired with itself is counted only once. Working: the pairs are 1 × 100, 2 × 50, 4 × 25, 5 × 20 and 10 × 10. The first four pairs give eight different factors, and the last pair adds only one more, so the factors are 1, 2, 4, 5, 10, 20, 25, 50 and 100. Answer: 9. The distractors: 10 comes from counting the pair 10 × 10 as two separate factors; 8 comes from leaving 1 out of the list, on the view that 1 is not a proper factor; 4 comes from writing 100 = 2² × 5² and multiplying the two indices together instead of adding 1 to each index first.
19. (a) 91 is not prime, because 91 = 7 × 13. — Check 91 for prime factors up to its square root, which is just under 10: 91 ÷ 7 = 13, and both 7 and 13 are prime, so 91 = 7 × 13 and 91 is not a prime number. Checking only 2, 3 and 5 misses that 7 also needs to be tried — 91 is odd, its digits do not sum to a multiple of 3 (9 + 1 = 10), and it does not end in 0 or 5, so those three checks alone wrongly suggest it is prime. Assuming any odd number ending in 1 must be prime ignores that 91 = 7 × 13 is a counterexample. Misapplying the digit-sum test for 3 by miscounting 9 + 1 as a multiple of 3 wrongly concludes 91 is divisible by 3, when the correct digit sum, 10, is not a multiple of 3. So 91 is not prime, because 91 = 7 × 13.
20. (a) 20% — Method: a percentage is a number of parts per hundred, so divide the numerator by the denominator and multiply by 100. Working: 1 ÷ 5 = 0.2, and 0.2 × 100 = 20; the same result comes from scaling 1/5 to 20/100. Answer: 20%. The distractors: 5% comes from reading the denominator 5 straight off as the percentage; 25% comes from confusing 1/5 with 1/4, the fraction met most often in percentage work; 50% comes from a place value slip in the division, writing 1 ÷ 5 as 0.5 instead of 0.2.