✏️ Paper 1 non-calculator warm-up — Foundation

Answer key

1. (b) 30 — Method: the smallest matching total is the lowest common multiple of the two pack sizes. Working: multiples of 6 are 6, 12, 18, 24, 30 …; multiples of 10 are 10, 20, 30 …. The lowest common multiple is 30. 60 comes from working out 6 × 10 = 60, the product of the pack sizes rather than their lowest common multiple. 16 comes from working out 6 + 10 = 16, which is not a common multiple at all. 2 is the highest common factor of 6 and 10, not a total of tickets. Answer: 30.
2. (d) 1:4 — Convert 1.4 l to millilitres: 1.4 l = 1400 ml. The ratio is 350 : 1400. Divide both parts by 350: 350 ÷ 350 = 1 and 1400 ÷ 350 = 4, giving 1 : 4. Misreading 1.4 l as 14 (moving the decimal point) gives 350 : 14, which simplifies to 25 : 1 — a very different, implausible ratio. Dividing by 175 instead of 350 gives 2 : 8, which still shares a common factor of 2, so it is not fully simplified. Swapping the order gives 4 : 1, litres to millilitres the wrong way round.
3. (a) 1/5 — Work out the bracket first: 2 + 3 = 5. The reciprocal of 5 is 1/5. A candidate who forgot to take the reciprocal and just gave the value of the bracket wrote 5. A candidate who took the reciprocal but made a sign error wrote −1/5. A candidate who found the reciprocal of each number separately and added them, treating reciprocal as if it distributes over addition, worked out 1/2 + 1/3 = 5/6.
4. (b) 3:2 — Write both fractions over a common denominator of 4: 3/4 stays as 3/4, and 1/2 = 2/4. Comparing the numerators gives the ratio 3 : 2. Getting 2 : 3 swaps the two parts round. Getting 3 : 1 comes from using the numerator of the first fraction and the original numerator of the second fraction (1) without converting to a common denominator. Getting 2 : 1 comes from using only the denominators, 4 and 2, and simplifying those instead of the numerators.
5. (d) 1,000 — Method: round each number to 1 significant figure, then multiply the rounded values. Working: 49 rounds to 50 and 21 rounds to 20, and 50 × 20 = 1,000 because 5 × 2 = 10 and the two rounded numbers carry one zero each. Answer: 1,000. The distractors: 800 comes from rounding 49 down to 40 instead of to the nearest ten; 1,500 comes from rounding 21 up to 30 rather than down to 20; 1,029 is the exact product 49 × 21, worked out in full when the question asks for an estimate.
6. (a) 12 — Method: for any two numbers, their highest common factor multiplied by their lowest common multiple equals the product of the two numbers. This holds because the HCF collects every prime factor the two numbers share, and the LCM collects every prime factor that appears in either number, so between them they use each prime factor of the two numbers exactly once — the same primes as the product. Working: 4 × 60 = 240, and 240 ÷ 20 = 12. 15 comes from working out 60 ÷ 4 = 15, dividing the wrong pair of numbers. 16 comes from working out 20 − 4 = 16, subtracting the highest common factor instead of using the product rule. 240 is 4 × 60, the product of the highest common factor and the lowest common multiple, left un-divided by 20. Answer: 12.
7. (b) 75 g — Method: split the total mass into the number of parts shown by the ratio, then find the mass of tin. Working: the ratio 7:3 has 7 + 3 = 10 parts, so one part is 250 ÷ 10 = 25 g, and the mass of tin is 3 × 25 = 75 g. So the alloy contains 75 g of tin. Distractor 175 g is the mass of copper, not tin. Distractor 125 g comes from splitting the alloy into two equal halves, ignoring the ratio. Distractor 25 g is the value of one part, found correctly but never multiplied by 3.
8. (a) 49 — Method: 7² means 7 multiplied by itself. Working: 7 × 7 = 49. Answer: 49. 14 comes from working out 7 × 2, treating the power 2 as a number to multiply by rather than an instruction to multiply 7 by itself. 77 comes from writing the digit 7 twice side by side, treating the power as an instruction to repeat the digit rather than to multiply. 9 comes from working out 7 + 2, adding the base and the power instead of multiplying the base by itself.
9. (c) 10 — Method: the multiplication is carried out before the subtraction. Working: 4 × 2 = 8, so the calculation becomes 18 − 8 = 10. Answer: 10. The distractors: 28 comes from working from left to right, giving (18 − 4) × 2 = 14 × 2 = 28; −10 comes from subtracting the 18 from the 8 rather than the 8 from the 18, giving 8 − 18 = −10; 12 comes from reading 4 × 2 as 4 + 2 = 6 and then working out 18 − 6 = 12.
10. (c) 87 litres — Work out how much water is drained: 8 × 6 = 48 litres. Subtract this from the starting amount: 120 − 48 = 72 litres. Then add the 15 litres from the hose: 72 + 15 = 87 litres. Subtracting the 15 litres instead of adding it, as though the hose also removed water, gives 120 − 48 − 15 = 57 litres. Stopping after the drain step, without adding the hose water back in, leaves the working at 72 litres. Adding the rate and the time instead of multiplying them, 8 + 6 = 14 litres drained, and then working from there gives 120 − 14 + 15 = 121 litres. So 87 litres of water is left in the tank.
11. (d) 75% — Method: change a fraction to a percentage by dividing the numerator by the denominator and multiplying by 100. Working: 3 ÷ 4 = 0.75, and 0.75 × 100 = 75. Answer: 75%. The distractors: 34% comes from reading the digits 3 and 4 straight off as a percentage; 0.75% comes from dividing but forgetting to multiply by 100; 133% comes from inverting the fraction and working out 4 ÷ 3 instead.
12. (d) 24 km — Method: a fraction acts as an operator, so finding 8/12 of a distance means dividing by the denominator and multiplying by the numerator. Working: 36 ÷ 12 = 3, so one twelfth of the walk is 3 km, and eight twelfths is 3 × 8 = 24 km. Answer: 24 km. The distractors: 12 km comes from working out the part of the walk still left, the other four twelfths, instead of the part already completed; 288 km comes from multiplying by the numerator without dividing by the denominator, giving 36 × 8 = 288; 4.5 km comes from dividing by the numerator instead of multiplying by it, giving 36 ÷ 8 = 4.5.
13. (a) 0 — Method: BIDMAS works through the index first, then the multiplication, then the subtraction. Working: 5² = 25, then 4 × 25 = 100, and finally 100 − 100 = 0. Answer: 0. The distractors: 2400 comes from working from left to right and subtracting first, giving (100 − 4) × 25 = 96 × 25 = 2400; −300 comes from multiplying before applying the index, giving (4 × 5)² = 20² = 400 and then 100 − 400 = −300; 60 comes from reading 5² as 5 × 2 = 10, so that 4 × 10 = 40 and 100 − 40 = 60.
14. (c) 0.07 — Each digit after the decimal point has a place value: the first digit is tenths, the second is hundredths, the third is thousandths. In 3.472, the 4 is in the tenths place and the 7 is in the hundredths place, so it is worth 0.07. Reading it as 7 ignores place value altogether, treating it as if it were a whole number. Reading it as 0.7 puts it one place too big, in the tenths place. Reading it as 0.007 puts it one place too small, in the thousandths place. The digit 7 in 3.472 is worth 0.07.
15. (d) 19 — 2² = 4, then 4 × 4 = 16, then 3 + 16 = 19. Adding before multiplying gives 3 + 4 = 7, then 7 × 4 = 28 — multiplication comes before addition. Squaring the product instead of just the 2 gives 4 × 2 = 8, then 8² = 64, then 3 + 64 = 67. Working strictly left to right throughout gives 3 + 4 = 7, then 7 × 2 = 14, then 14² = 196.
16. (d) 11/12 — Convert both mixed numbers to improper fractions with a common denominator. 2 3/4 = 11/4, which is 33/12, and 1 5/6 = 11/6, which is 22/12. Subtracting, 33/12 − 22/12 gives 11/12, already in its simplest form. Forgetting to borrow, and instead subtracting the fraction parts the other way round to avoid a negative, 10/12 − 9/12 gives 1/12; adding that to the whole-number difference of 1 gives 13/12. Subtracting only the fraction parts, 9/12 − 10/12, and reporting just the size of that difference gives 1/12, which ignores the whole numbers altogether. Adding the two improper fractions instead of subtracting them, 33/12 + 22/12, gives 55/12. So 2 3/4 − 1 5/6 = 11/12.
17. (c) 6 — 2 × 3 = 6, then 36 ÷ 6 = 6. Ignoring the brackets and working left to right gives 36 ÷ 2 = 18, then 18 × 3 = 54. Multiplying by the bracket instead of dividing by it gives 2 × 3 = 6, then 36 × 6 = 216. Dividing by only the 2 inside the bracket, and ignoring the × 3, gives 36 ÷ 2 = 18.
18. (d) 3:8 — Convert 2 hours to minutes: 2 hours = 120 minutes. The ratio is 45 : 120. The highest common factor of 45 and 120 is 15. Divide both parts by 15: 45 ÷ 15 = 3 and 120 ÷ 15 = 8, giving 3 : 8. Leaving the hours unconverted gives 45 : 2 — the units on each side are different, so this does not compare like with like. Dividing by 5 instead of 15 gives 9 : 24, which still shares a common factor of 3, so it is not fully simplified. Swapping the order gives 8 : 3, hours to minutes instead of minutes to hours.
19. (b) £52 — Method: the difference between the two ratio numbers tells you how many parts the £39 difference represents. Working: the difference in parts is 7 − 4 = 3, and this represents £39, so one part is £39 ÷ 3 = £13. Josh's savings are 4 × £13 = £52. So Josh has £52. Distractor £91 is Mia's savings, not Josh's. Distractor £39 comes from using the given £39 difference as the final answer, without scaling it to Josh's number of parts. Distractor £13 is the value of one part, found correctly but never multiplied by 4.
20. (c) 693 — Method: multiplying a bracket by a number multiplies every term inside it, so 7 × (100 − 1) = 7 × 100 − 7 × 1. Working: 7 × 100 = 700 and 7 × 1 = 7, so the calculation becomes 700 − 7 = 693. Answer: 693. The distractors: 699 comes from subtracting the 1 itself rather than 7 lots of it, giving 700 − 1 = 699; 707 comes from adding the second product instead of subtracting it, giving 700 + 7 = 707; 700 comes from rounding 99 up to 100 and then offering the estimate 7 × 100 as an exact value.