📈 Quadratics: factorise, complete the square, formula

Answer key

1. (d) x³ + 6x² + 11x + 6 — (x + 1)(x + 2) = x² + 3x + 2. Multiplying by (x + 3): (x² + 3x + 2)(x + 3) = x³ + 3x² + 2x + 3x² + 9x + 6, which simplifies to x³ + 6x² + 11x + 6. Choosing x³ + 6x² + 6x + 6 has the right x² and constant terms but adds 1 + 2 + 3 = 6 for the x-coefficient instead of the correct sum of pairwise products 1×2 + 1×3 + 2×3 = 11. Choosing x³ + 5x² + 11x + 6 sums only two of the three constants (2 + 3 = 5) for the x² coefficient, leaving out the 1. Choosing x³ + 6x² + 11x + 5 adds the last two constants (2 + 3 = 5) instead of multiplying all three (1 × 2 × 3 = 6) for the constant term.
2. (b) 5 and −6 — Method: turn the sentence into an equation in one letter, collect every term on one side so it reads as a quadratic equal to zero, then factorise. Working: if the number is x then x² + x = 30, which rearranges to x² + x − 30 = 0; two numbers that multiply to −30 and add to 1 are 6 and −5, so (x + 6)(x − 5) = 0 and x = −6 or x = 5. Both values work: 5 + 25 = 30 and −6 + 36 = 30. Answer: 5 and −6. The distractors: 6 and −5 comes from reading the numbers inside the brackets as the solutions without changing their signs; 5 only comes from discarding the negative solution, although nothing in the question rules out a negative number; 5 and 6 comes from hunting for a factor pair of 30 instead of forming and solving the quadratic.
3. (b) −23 — Expand two of the three brackets first: (x + 5)(x − 2) = x² + 3x − 10. Then multiply this by the remaining bracket: (2x − 1)(x² + 3x − 10) = 2x³ + 6x² − 20x − x² − 3x + 10, which simplifies to 2x³ + 5x² − 23x + 10, so the coefficient of x is −23. Writing −13 comes from a sign slip in the first expansion, combining 5x − 2x as −5x − 2x = −7x instead of +3x, which carries through to a wrong final coefficient. Writing −20 comes from forgetting to distribute the −1 across every term of x² + 3x − 10, dropping the −1 × 3x = −3x contribution. Writing 10 comes from reading off the constant term of the expansion instead of the coefficient of x.
4. (d) 2x/(x − 2) — Factorise x² − 4 as (x − 2)(x + 2) first — it's a difference of two squares. The (x + 2) in the numerator then cancels with the (x + 2) in the factorised denominator, and 6x² ÷ 3x simplifies to 2x, leaving 2x/(x − 2). Writing 2/(x − 2) comes from over-cancelling 6x² ÷ 3x as 2 instead of 2x, dropping the x that should remain. Writing 2x/(x + 2) comes from factorising x² − 4 as (x + 2)² instead of (x − 2)(x + 2), a difference of two squares always has one plus and one minus bracket. Writing 2x²/(x − 2) comes from simplifying 6x² ÷ 3x as 2x² instead of 2x, dividing the coefficients but not reducing the power of x.
5. (d) x² − 49 — Area = length × width = (x + 7)(x − 7). Expanding: x × x = x², x × (−7) = −7x, 7 × x = 7x, 7 × (−7) = −49. The two middle terms −7x and 7x cancel, leaving x² − 49. A candidate who misremembers the difference-of-two-squares result as a sum gets x² + 49. A candidate who makes a sign error and treats both middle terms as −7x instead of cancelling gets x² − 14x − 49. A candidate who confuses area with perimeter and simply adds the length and width gets 2x.
6. (b) k = 9 — Method: complete the square, because a squared bracket is equal to zero for exactly one value of x. Working: x² − 6x = (x − 3)² − 9, so the equation becomes (x − 3)² − 9 + k = 0, that is (x − 3)² = 9 − k; there is exactly one solution when 9 − k = 0, so k = 9 and the equation reads x² − 6x + 9 = 0 with the repeated solution x = 3. Answer: k = 9. The distractors: k = 3 comes from halving the 6 and not squaring the result; k = 36 comes from squaring the whole of 6 instead of half of it; k = −9 comes from solving 9 − k = 0 with the sign of k the wrong way round.
7. (d) (x − 7)² + 1 is at least 1 for every x, so y is never 0 — x² − 14x + 50 = (x − 7)² − 7² + 50 = (x − 7)² + 1. Since a squared term can never be negative, (x − 7)² ≥ 0 for every real x, so y = (x − 7)² + 1 ≥ 1 for every x — y is always at least 1, so it can never equal 0, and the curve never crosses the x-axis. Claiming the discriminant is positive is wrong on the facts: b² − 4ac = (−14)² − 4(1)(50) = 196 − 200 = −4, which is NEGATIVE, not positive — a negative discriminant is in fact the standard reason a quadratic has no real roots, so this option misstates its own sign. Claiming the turning point is at (7, −1) is wrong because completing the square gives (x − 7)² + 1, so the turning point is (7, 1) — the constant is +1, not −1, and a point with a negative y-coordinate would sit BELOW the x-axis, not above it, contradicting the option's own claim. Claiming that 50 being positive is enough is wrong because it ignores the −14x term completely — a positive constant term alone does not guarantee y stays positive for every x (the expression still dips down towards its turning point before growing again, and it is the completed square that shows how far it dips, not the constant on its own).
8. (d) x = −4, y = −19 — x² + 8x − 3 = (x + 4)² − 4² − 3 = (x + 4)² − 19. Substituting x = −4: (−4)² = 16, 8 × (−4) = −32, so 16 − 32 − 3 = −19, confirming the minimum value −19 at x = −4: turning point (−4, −19). Using 8 instead of half of it inside the bracket gives (x + 8)² − 67, turning point (−8, −67) — wrong, because only half the coefficient of x belongs inside the bracket. Reading the bracket's sign directly as the turning point's x-coordinate gives (4, −19) — wrong, because (x + 4)² is zero at x = −4, not x = 4. Computing 16 + 3 = 19 instead of −3 − 16 = −19 flips the sign of the constant, giving (−4, 19) — wrong, since the completed square's constant must be evaluated as −3 minus 16, not 16 plus 3. Check by substitution whenever the sign of a constant feels uncertain.
9. (a) 3x/2 — Factorise top and bottom first: 6x³ − 15x² = 3x²(2x − 5), and 4x² − 10x = 2x(2x − 5). The bracket (2x − 5) is common to both, so it cancels, leaving 3x²/(2x); dividing the power of x, 3x² ÷ x = 3x, gives 3x/2. Writing 3x²/2 cancels the (2x − 5) correctly and removes the denominator's x, but never reduces the power of x left in the numerator — 3x² ÷ x should give 3x, not stay as 3x². Writing 3/2 cancels the (2x − 5) correctly but then drops the x from the numerator altogether, treating 3x² over x as if it cancelled completely to 3 instead of reducing to 3x. Writing −3x/2 comes from factorising the denominator with the wrong sign, as 2x(5 − 2x) instead of 2x(2x − 5); cancelling (5 − 2x) against the numerator's (2x − 5) then needs an extra minus sign, which flips the answer to −3x/2.
10. (c) t = 1 second and t = 5 seconds — The ball is at ground level when h = 0, which happens when either bracket is zero. t − 1 = 0 gives t = 1, and 5 − t = 0 gives t = 5. The option with t = −1 makes a sign error solving the first bracket. The option with t = −5 makes a sign error solving the second bracket, treating 5 − t = 0 as if it gave a negative solution. The option with t = 4 seconds is an arithmetic slip in solving 5 − t = 0.
11. (b) (3x + 1)(2x − 3) — To factorise 6x² − 7x − 3, look for two numbers that multiply to 6 × (−3) = −18 and add to −7: these are −9 and 2. Splitting the middle term gives 6x² − 9x + 2x − 3, which groups to 3x(2x − 3) + 1(2x − 3) = (3x + 1)(2x − 3). Writing (3x − 1)(2x + 3) comes from using the pair 9 and −2 instead — the right product but the wrong signs, giving +7x instead of −7x. Writing (6x − 1)(x + 3) comes from picking the factor pair 18 and −1: it multiplies to −18 correctly, but it adds to 17, not −7, so checking only the product splits the middle term as 6x² + 18x − x − 3 and pairs the wrong factors of 6 and 3 together. Writing (x − 3)(6x + 1) comes from that same unchecked pair used the other way round, splitting the middle term as 6x² + x − 18x − 3.
12. (d) (x − 8)(x + 8) — x² − 64 = x² − 8², a difference of two squares, which factorises as (x − 8)(x + 8). A candidate who treats it as a perfect square with a repeated negative factor gets (x − 8)(x − 8), which expands to x² − 16x + 64 — wrong on both the middle and constant terms. A candidate who uses a repeated positive factor gets (x + 8)(x + 8), which expands to x² + 16x + 64. A candidate who picks a different factor pair of 64, such as 4 and 16, without checking that the middle term cancels, gets (x − 4)(x + 16), which expands to x² + 12x − 64 — the wrong middle term.
13. (c) 6x(2x + 3) — The highest common factor of 12x² and 18x is 6x. Dividing each term by 6x gives 12x² ÷ 6x = 2x and 18x ÷ 6x = 3, so 12x² + 18x = 6x(2x + 3). A candidate who only takes out the number 6 (missing the x) gets 6(2x² + 3x), which is not fully factorised. A candidate who only takes out 2x (missing the extra factor of 3 in 6) gets 2x(6x + 9), also not fully factorised — the bracket still shares a common factor. A candidate who takes out 3x instead of the full 6x gets 3x(4x + 6), which again is not fully factorised since 4x + 6 shares a common factor of 2.
14. (a) x = 4 ± √13 — Method: halve the coefficient of x to form the bracket, subtract the square of that number to keep the expression equal to the original, then rearrange and take the square root of both sides. Working: half of −8 is −4, so x² − 8x + 3 = (x − 4)² − 16 + 3 = (x − 4)² − 13; setting this equal to zero gives (x − 4)² = 13, so x − 4 = ±√13 and x = 4 ± √13. Answer: x = 4 ± √13. The distractors: x = 8 ± √13 comes from putting the whole coefficient 8 inside the bracket instead of half of it; x = 4 ± √19 comes from adding 16 and 3 rather than subtracting 3 from 16; x = −4 ± √13 comes from writing the bracket as (x + 4)², which reverses the sign of the number that comes out of it.
15. (a) t = 0 or t = 4 — The ball is at ground level exactly when h = 0. From the table, h = 0 at t = 0 and at t = 4, so those are the two times. Distractor origins: t = 1 or t = 3 picks the times with equal (but non-zero) height instead of ground level; t = 2 picks the time of maximum height instead of ground level; t = 0 finds only the starting time and misses the second one.
16. (c) x = 2 or x = 3 — Method: factorise into two brackets whose numbers multiply to the constant term and add to the coefficient of x, then set each bracket equal to zero. Working: two numbers that multiply to 6 and add to −5 are −2 and −3, so x² − 5x + 6 = (x − 2)(x − 3) = 0; then x − 2 = 0 gives x = 2 and x − 3 = 0 gives x = 3. Answer: x = 2 or x = 3. The distractors: x = −2 or x = −3 comes from reading the numbers inside the brackets as the solutions instead of changing their signs; x = 1 or x = 6 comes from taking the first factor pair of 6 without checking that the pair adds to −5; x = 5 or x = 6 comes from reading the solutions straight off the 5 and the 6 in the equation.
17. (d) k < 4 — Method: the number of real solutions of ax² + bx + c = 0 is decided by the discriminant b² − 4ac, and two different real solutions need it to be greater than zero. Working: here a = 1, b = −4 and c = k, so b² − 4ac = 16 − 4k; the condition is 16 − 4k > 0, which gives 16 > 4k and then k < 4. Answer: k < 4; for example k = 3 gives x² − 4x + 3 = 0, whose solutions are 1 and 3. The distractors: k ≤ 4 comes from using b² − 4ac ≥ 0, which also allows the single repeated solution at k = 4; k > 4 comes from dividing −4k > −16 by −4 without reversing the inequality sign; k < 16 comes from leaving the factor 4 out of 4ac and solving 16 − k > 0.
18. (b) x = −3, y = −7 — x² + 6x + 2 = (x + 3)² − 3² + 2 = (x + 3)² − 7. Substituting x = −3: (−3)² = 9, 6 × (−3) = −18, so 9 − 18 + 2 = −7, confirming the minimum value −7 at x = −3: turning point (−3, −7). Using 6 instead of half of 6 inside the bracket gives (x + 6)² − 34, turning point (−6, −34) — wrong, because only half the coefficient of x belongs inside the bracket. Reading the bracket's sign directly as the turning point's x-coordinate gives (3, −7) — wrong, because (x + 3)² is zero at x = −3, not x = 3. Computing 9 − 2 = 7 instead of 2 − 9 = −7 flips the sign of the constant, giving (−3, 7) — wrong, since the completed square's constant must be evaluated as 2 minus 9, not 9 minus 2. Always check a turning point by substituting its x-value back into the original equation.
19. (b) (2x + 14)/((x − 1)(x + 3)) — To subtract these fractions, write them over the common denominator (x − 1)(x + 3): the numerator becomes 4(x + 3) − 2(x − 1). Expanding gives 4x + 12 − 2x + 2, which simplifies to 2x + 14, so the answer is (2x + 14)/((x − 1)(x + 3)). Writing (2x + 11)/((x − 1)(x + 3)) comes from not distributing the minus sign fully across the second bracket, treating −2(x − 1) as −2x − 1 instead of −2x + 2. Writing 2/((x − 1)(x + 3)) comes from subtracting the two original numerators directly, 4 − 2 = 2, the same mistake as subtracting fractions without a common denominator. Writing (2x − 10)/((x − 1)(x + 3)) comes from swapping which numerator multiplies which bracket, forming 4(x − 1) − 2(x + 3) instead of 4(x + 3) − 2(x − 1).
20. (d) 12 m — Method: give the width a letter, write the length in terms of it and use length × width = area to form a quadratic. Working: with a width of x metres the length is x + 4, so x(x + 4) = 96, which rearranges to x² + 4x − 96 = 0; factorising gives (x + 12)(x − 8) = 0, and a width must be positive, so x = 8 and the length is 8 + 4 = 12. Answer: 12 m, and 12 × 8 = 96 as the area requires. The distractors: 8 m is the width rather than the length asked for; 16 m comes from taking the other root as 12 and adding 4 to it, ignoring that the root −12 cannot be a width; 24 m comes from dividing the area by the 4 in the question instead of forming an equation.
21. (d) 3 — 2x² − 12x + 7 rewrites as 2(x² − 6x) + 7, then as 2[(x − 3)² − 9] + 7, which simplifies to 2(x − 3)² − 11, since −2 × 9 + 7 = −11. The bracket (x − 3)² is zero when x = 3, so the minimum occurs at x = 3. Treating the shift as b/a instead of b/(2a) — using 6 instead of 3 — gives x = 6, which is wrong. Reading the bracket's sign directly without negating it gives x = −3, wrong, because (x − 3)² is zero at x = 3, not x = −3. Reading off the coefficient of x itself, −12, and calling that the answer skips the completing-the-square process entirely and gives x = −12, which is wrong because b is not the turning point's x-coordinate under any circumstance. Always check: substituting your value of x should make the bracketed term equal to zero, and nothing else.
22. (c) x = 5, y = 5 — x² − 10x + 30 = (x − 5)² − 5² + 30 = (x − 5)² + 5. Substituting x = 5: 5² = 25, 10 × 5 = 50, so 25 − 50 + 30 = 5, confirming the minimum value 5 at x = 5: turning point (5, 5). Using −10 instead of half of it inside the bracket gives (x − 10)² − 70, turning point (10, −70) — wrong, because only half the coefficient of x belongs inside the bracket. Reading the bracket's sign directly as the turning point's x-coordinate gives (−5, 5) — wrong, because (x − 5)² is zero at x = 5, not x = −5. Computing 25 − 30 = −5 instead of 30 − 25 = 5 flips the sign of the constant, giving (5, −5) — wrong, since the completed square's constant must be evaluated as 30 minus 25, not 25 minus 30. Always check a turning point by substituting its x-value back into the original equation.
23. (d) y = (x + 3)(x − 5) — A root at x = −3 means the matching bracket must be zero when x = −3, so the bracket is (x − (−3)) = (x + 3). A root at x = 5 means the other bracket is (x − 5). So the equation is y = (x + 3)(x − 5); checking the y-intercept, (0 + 3)(0 − 5) = 3 × (−5) = −15, which matches the given value. The option (x − 3)(x + 5) swaps the signs of both roots. The option (x + 3)(x + 5) keeps the correct sign for the first root but gets the second wrong. The option (x − 3)(x − 5) gets the first root's sign wrong.
24. (d) x = 4 or x = −4 — Method: divide both sides by 2 to get x² = 16, then take the square root of both sides: x = 4 or x = −4. Distractor origins: x = 4 forgets the negative root; x = 8 comes from halving 16 instead of taking its square root; x = 16 stops at x² = 16 without ever taking the square root.