📈 Quadratics: factorise, complete the square, formula

Answer key

1. (a) x = 4 ± √13 — Method: halve the coefficient of x to form the bracket, subtract the square of that number to keep the expression equal to the original, then rearrange and take the square root of both sides. Working: half of −8 is −4, so x² − 8x + 3 = (x − 4)² − 16 + 3 = (x − 4)² − 13; setting this equal to zero gives (x − 4)² = 13, so x − 4 = ±√13 and x = 4 ± √13. Answer: x = 4 ± √13. The distractors: x = 8 ± √13 comes from putting the whole coefficient 8 inside the bracket instead of half of it; x = 4 ± √19 comes from adding 16 and 3 rather than subtracting 3 from 16; x = −4 ± √13 comes from writing the bracket as (x + 4)², which reverses the sign of the number that comes out of it.
2. (c) x = −2 or x = 4 — The solutions of x² − 2x − 8 = 0 are the x-values where y = 0. From the table, y = 0 when x = −2 and when x = 4, so those are the two solutions. Distractor origins: x = −1 or x = 3 picks the pair of x-values that give equal (but non-zero) y-values instead of y = 0; x = 0 or x = −8 mixes up an x-value with its corresponding y-value; x = −2 only reads off one of the two roots and misses the other.
3. (a) It touches the x-axis once, only at x = 4. — (x − 4)² is a square, so it equals zero only when x − 4 = 0, that is at x = 4 — the curve just touches the x-axis there rather than crossing it, since a square cannot be negative on either side to cross through. Saying it crosses at x = 4 and x = −4 wrongly introduces a plus-or-minus, as if taking a square root of x, rather than recognising the bracket is already squared and only zero once. Saying it never touches the x-axis forgets that a squared term CAN equal zero, even though it can never be negative. Saying it crosses at x = 2 and x = −2 confuses (x − 4)² with the different expression x² − 4.
4. (b) k = 9 — Method: complete the square, because a squared bracket is equal to zero for exactly one value of x. Working: x² − 6x = (x − 3)² − 9, so the equation becomes (x − 3)² − 9 + k = 0, that is (x − 3)² = 9 − k; there is exactly one solution when 9 − k = 0, so k = 9 and the equation reads x² − 6x + 9 = 0 with the repeated solution x = 3. Answer: k = 9. The distractors: k = 3 comes from halving the 6 and not squaring the result; k = 36 comes from squaring the whole of 6 instead of half of it; k = −9 comes from solving 9 − k = 0 with the sign of k the wrong way round.
5. (d) 26 — Method: expand both brackets, treating the second as multiplication by −2 so that both of its terms change sign, then collect like terms. Working: 2(a + 6) = 2a + 12 and −2(a − 7) = −2a + 14, so the expression becomes 2a + 12 − 2a + 14; the a terms give 2a − 2a = 0, so no term in a survives, and the numbers give 12 + 14 = 26. Answer: 26. The distractors: −2 comes from expanding the second bracket as −2a − 14, so that the numbers give 12 − 14; 4a − 2 comes from adding 2(a − 7) instead of subtracting it, giving 2a + 12 + 2a − 14; 13 comes from multiplying the 2 over only the first term of each bracket, giving 2a + 6 − 2a + 7.
6. (c) 5(x + y − 1) — Method: take out the highest common factor of all three terms and divide every term by it, the number term included. Working: the highest common factor of 5x, 5y and −5 is 5; dividing gives 5x ÷ 5 = x, 5y ÷ 5 = y and −5 ÷ 5 = −1, so the bracket holds x + y − 1. Answer: 5(x + y − 1), which multiplies back out to 5x + 5y − 5. The distractors: 5(x + y + 1) comes from dividing −5 by 5 and losing the minus sign; 5(x + y − 5) comes from dividing only the terms containing a letter by 5 and carrying the −5 into the bracket unchanged; 5(xy − 1) comes from collecting the unlike terms 5x and 5y as 5xy before factorising.
7. (c) x = 3 and x = −5 — To factorise x² + 2x − 15, find two numbers that multiply to −15 and add to 2: these are 5 and −3, since 5 × (−3) = −15 and 5 + (−3) = 2. So x² + 2x − 15 = (x + 5)(x − 3). Setting each factor to zero gives x = −5 and x = 3. Choosing x = −3 and x = 5 comes from swapping the signs of the correct roots. Choosing x = 5 and x = 3 uses the right pair of numbers, 5 and 3, but forgets that one of them must be negative for the product to equal −15. Choosing x = −15 and x = 1 mistakes the constant term, −15, for one of the roots, and pairs it oddly with x = 1.
8. (a) y = (x − 2)² + 3 — Since (x − 2)² is never negative, (x − 2)² + 3 is always at least 3, so y can never equal 0 and the graph never crosses the x-axis. The other three graphs are all given in a factorised or difference-of-squares form that shows two real roots: y = (x − 2)(x + 3) crosses at x = 2 and x = −3; y = x² − 9 = (x − 3)(x + 3) crosses at x = 3 and x = −3; y = (x + 4)(x − 1) crosses at x = −4 and x = 1.
9. (c) 4 — x² + 12x + 40 = (x + 6)² − 6² + 40 = (x + 6)² + 4, so a = 6 and b = 4. Since (x + 6)² can never be negative, y = (x + 6)² + 4 is smallest when the bracket is zero, so the minimum value of y is 4. Giving 40 instead reads off the ORIGINAL constant term and ignores the completing-the-square step entirely — wrong, because 40 is the value of y when x = 0, not the minimum value. Giving −6 instead answers with the x-coordinate of the turning point (where the bracket is zero) rather than the minimum y-value itself — wrong, because the question asks for the minimum value of y, not the value of x that produces it. Giving 36 instead stops after squaring half the coefficient, 6² = 36, without combining it with the 40 already in the expression — wrong, because the minimum value is 40 minus 36, not 36 on its own.
10. (c) 25 — Method: read off a, b and c with their signs and substitute them into b² − 4ac. Working: for 2x² + 3x − 2 = 0, a = 2, b = 3 and c = −2, so b² − 4ac = 3² − 4 × 2 × (−2) = 9 − (−16) = 9 + 16 = 25. Answer: 25. The distractors: −7 comes from taking c as +2, which gives 9 − 16; 22 comes from working b² as 2 × 3 = 6 and then 6 + 16; 13 comes from leaving the 4 out of 4ac and working 9 − 2 × (−2).
11. (d) y = (x + 3)(x − 5) — A root at x = −3 means the matching bracket must be zero when x = −3, so the bracket is (x − (−3)) = (x + 3). A root at x = 5 means the other bracket is (x − 5). So the equation is y = (x + 3)(x − 5); checking the y-intercept, (0 + 3)(0 − 5) = 3 × (−5) = −15, which matches the given value. The option (x − 3)(x + 5) swaps the signs of both roots. The option (x + 3)(x + 5) keeps the correct sign for the first root but gets the second wrong. The option (x − 3)(x − 5) gets the first root's sign wrong.
12. (c) x = 0 or x = 3 — Method: take out the common factor 5x: 5x(x − 3) = 0, so 5x = 0 or x − 3 = 0, giving x = 0 or x = 3. Distractor origins: x = 0 or x = 15 comes from forgetting to divide the second term by the common factor 5x correctly, leaving 15 instead of 3; x = 3 loses the solution x = 0 by dividing both sides by x; x = 5 or x = 3 mistakes the coefficient 5 itself for one of the solutions.
13. (c) t = 1 second and t = 5 seconds — The ball is at ground level when h = 0, which happens when either bracket is zero. t − 1 = 0 gives t = 1, and 5 − t = 0 gives t = 5. The option with t = −1 makes a sign error solving the first bracket. The option with t = −5 makes a sign error solving the second bracket, treating 5 − t = 0 as if it gave a negative solution. The option with t = 4 seconds is an arithmetic slip in solving 5 − t = 0.
14. (c) x = 3 or x = 1/2 — Method: factorise into two brackets whose x terms multiply to 2x² and whose numbers multiply to 3, checking that they produce the middle term −7x, then set each bracket equal to zero. Working: (2x − 1)(x − 3) expands to 2x² − 6x − x + 3 = 2x² − 7x + 3, so (2x − 1)(x − 3) = 0; then 2x − 1 = 0 gives x = 1/2 and x − 3 = 0 gives x = 3. Answer: x = 3 or x = 1/2. The distractors: x = 3/2 or x = 1 comes from factorising as (2x − 3)(x − 1), whose middle term is −5x and not −7x; x = −3 or x = −1/2 comes from reading the roots straight out of (2x − 1)(x − 3) without changing the signs; x = 6 or x = 1 comes from using the quadratic formula with the denominator written as a instead of 2a, dividing 7 ± 5 by 2.
15. (d) x = 0 or x = 6 — Method: factorise by taking out the common factor x: x(x − 6) = 0, so x = 0 or x − 6 = 0, giving x = 0 or x = 6. Distractor origins: x = 6 comes from dividing both sides by x, which loses the solution x = 0; x = 0 stops after finding only one factor; x = 3 comes from halving the coefficient of x instead of factorising.
16. (d) x = 4 or x = −4 — Method: divide both sides by 2 to get x² = 16, then take the square root of both sides: x = 4 or x = −4. Distractor origins: x = 4 forgets the negative root; x = 8 comes from halving 16 instead of taking its square root; x = 16 stops at x² = 16 without ever taking the square root.
17. (b) x = −3, y = −7 — x² + 6x + 2 = (x + 3)² − 3² + 2 = (x + 3)² − 7. Substituting x = −3: (−3)² = 9, 6 × (−3) = −18, so 9 − 18 + 2 = −7, confirming the minimum value −7 at x = −3: turning point (−3, −7). Using 6 instead of half of 6 inside the bracket gives (x + 6)² − 34, turning point (−6, −34) — wrong, because only half the coefficient of x belongs inside the bracket. Reading the bracket's sign directly as the turning point's x-coordinate gives (3, −7) — wrong, because (x + 3)² is zero at x = −3, not x = 3. Computing 9 − 2 = 7 instead of 2 − 9 = −7 flips the sign of the constant, giving (−3, 7) — wrong, since the completed square's constant must be evaluated as 2 minus 9, not 9 minus 2. Always check a turning point by substituting its x-value back into the original equation.
18. (d) k < 4 — Method: the number of real solutions of ax² + bx + c = 0 is decided by the discriminant b² − 4ac, and two different real solutions need it to be greater than zero. Working: here a = 1, b = −4 and c = k, so b² − 4ac = 16 − 4k; the condition is 16 − 4k > 0, which gives 16 > 4k and then k < 4. Answer: k < 4; for example k = 3 gives x² − 4x + 3 = 0, whose solutions are 1 and 3. The distractors: k ≤ 4 comes from using b² − 4ac ≥ 0, which also allows the single repeated solution at k = 4; k > 4 comes from dividing −4k > −16 by −4 without reversing the inequality sign; k < 16 comes from leaving the factor 4 out of 4ac and solving 16 − k > 0.
19. (d) x = 2 or x = −5 — Method: find two numbers that multiply to give −10 and add to give 3 — these are 5 and −2. So x² + 3x − 10 = (x + 5)(x − 2) = 0, giving x = −5 or x = 2. Distractor origins: x = −2 or x = 5 swaps the signs of the two roots; x = 2 or x = 5 makes both roots positive, ignoring the sign of −10; x = −5 or x = −2 makes both roots negative.
20. (b) x = 5 — Area = length × width, so x(x + 3) = 40, which rearranges to x² + 3x − 40 = 0. This factorises as (x + 8)(x − 5) = 0: the two numbers in the brackets must multiply to −40 and add to +3, and the pair 8 and −5 does both. This gives x = −8 or x = 5. Since x is a length, it cannot be negative, so x = 5. A candidate who gives both solutions without rejecting the negative one, which cannot be a length, answers x = 5 or x = −8. A candidate who picks the wrong factor pair of 40, such as 10 and −4 instead of 8 and −5, gets (x + 10)(x − 4) = 0 and answers x = 4. A candidate who rejects the wrong root, keeping the negative solution instead of the positive one, answers x = −8.
21. (c) 6x(2x + 3) — The highest common factor of 12x² and 18x is 6x. Dividing each term by 6x gives 12x² ÷ 6x = 2x and 18x ÷ 6x = 3, so 12x² + 18x = 6x(2x + 3). A candidate who only takes out the number 6 (missing the x) gets 6(2x² + 3x), which is not fully factorised. A candidate who only takes out 2x (missing the extra factor of 3 in 6) gets 2x(6x + 9), also not fully factorised — the bracket still shares a common factor. A candidate who takes out 3x instead of the full 6x gets 3x(4x + 6), which again is not fully factorised since 4x + 6 shares a common factor of 2.
22. (c) It has two different real solutions — Method: the discriminant is the quantity under the square root sign in the quadratic formula, so its sign decides how many real values the formula produces. Working: when the discriminant is positive its square root is a real number that is not zero, and the formula adds that root and subtracts it in turn, so the two results are different; a positive discriminant that is not a perfect square still gives two solutions, but they are not whole numbers. Answer: it has two different real solutions. The distractors: one repeated real solution is what a discriminant of zero gives, because adding and subtracting zero changes nothing; no real solutions is what a negative discriminant gives, because a negative number has no real square root; two whole-number solutions happens only when the discriminant is a perfect square and the division works out exactly, which a positive discriminant does not guarantee.
23. (c) x = 2, y = 5 — x² − 4x + 9 = (x − 2)² − 2² + 9 = (x − 2)² + 5. Substituting x = 2: 2² = 4, 4 × 2 = 8, so 4 − 8 + 9 = 5, confirming the minimum value 5 at x = 2: turning point (2, 5). Using −4 instead of half of it inside the bracket gives (x − 4)² − 7, turning point (4, −7) — wrong, because only half the coefficient of x belongs inside the bracket. Reading the bracket's sign directly as the turning point's x-coordinate gives (−2, 5) — wrong, because (x − 2)² is zero at x = 2, not x = −2. Computing 4 − 9 = −5 instead of 9 − 4 = 5 flips the sign of the constant, giving (2, −5) — wrong, since the completed square's constant must be evaluated as 9 minus 4, not 4 minus 9. Substitute the x-value back into the original equation whenever you are unsure of a sign.
24. (d) If the graph has two real roots, they are equal and opposite in value, so they sum to zero. — A turning point on the y-axis means the graph's axis of symmetry is the line x = 0, so any two roots must be symmetrical about x = 0 — equal in size but opposite in sign, summing to zero. The graph could still have no real roots, but that is not guaranteed just from the turning point's position, so the option claiming it must have none is too strong. The roots do not have to both be positive — if real, one is positive and one negative (or both are zero). The graph does not have to touch the x-axis at exactly one point either; it could cross at two symmetrical points, touch at one point, or miss the x-axis entirely.