24 questions working through all three methods of solving a quadratic, plus roots and turning points from the graph.
📈 Quadratics: factorise, complete the square, formula
Almost every Higher paper asks you to solve a quadratic, and the mark is often lost not on the algebra but on choosing the wrong method for the quadratic in front of you. This sheet takes the three methods in turn and then mixes them. It starts with factorising, including ax² + bx + c and the difference of two squares; moves to completing the square, and to reading the turning point straight out of the completed form; then to the quadratic formula, where the marks go missing on −b when b is already negative and on dividing the whole numerator by 2a. The last section gives you quadratics with no instruction, so you have to decide for yourself. Roots, intercepts and turning points from the graph are included too, because the graphical and algebraic halves of this topic are examined together.
- 1.Factorise fully 5x + 5y − 5
- 2.Solve x² − 5x + 6 = 0 by factorising.
- 3.A rectangle has length (2x + 5) cm and width (x − 2) cm. Work out an expression, in terms of x, for the perimeter of the rectangle. Give your answer in its simplest form.
- 4.The graph of y = x² + 2x − 15 crosses the x-axis at two points. By factorising, work out the x-coordinates of these two points.y = x² + 2x − 15
- 5.Solve 2x² = 18.
- 6.The graph of y = x² − 2x − 8 takes these values: when x = −2, y = 0; when x = −1, y = −5; when x = 0, y = −8; when x = 3, y = −5; when x = 4, y = 0. Use these values to write down the two solutions of x² − 2x − 8 = 0.y = x² − 2x − 8
- 7.Work out the value of the discriminant b² − 4ac for the equation 2x² + 3x − 2 = 0.
- 8.Factorise 6x² − 7x − 3.
- 9.Simplify (2x² + 7x + 3) ÷ (x² − 9), giving your answer as a single fraction.
- 10.Factorise 3x² + 10x − 8.
- 11.The curve y = −x² + 6x − 5 has a maximum point. Use completing the square to find its coordinates.y = −x² + 6x − 5
- 12.A graph has equation y = x² − 6x + 5. A student says its turning point has x-coordinate 6, because that's the coefficient of x. Which statement corrects the student's mistake?y = x² − 6x + 5
- 13.A ball is thrown in the air. Its height, h metres, above the ground after t seconds is given in this table: when t = 0, h = 0; when t = 1, h = 15; when t = 2, h = 20; when t = 3, h = 15; when t = 4, h = 0. Use the table to find the two times, in seconds, at which the ball is at ground level.
- 14.By completing the square, find the turning point of the curve y = x² + 8x − 3.y = x² + 8x − 3
- 15.By completing the square, find the turning point of the curve y = x² − 4x + 9.y = x² − 4x + 9
- 16.A rectangular garden has length (x + 7) m and width (x − 7) m. Work out an expression for the area of the garden, giving your answer in its simplest form.
- 17.Simplify 2/(x + 1) + 3/(x − 2), giving your answer as a single fraction.
- 18.A student is asked to simplify (6x³ − 15x²)/(4x² − 10x) fully. Four attempts are shown below. Which one is correct?
- 19.Solve 5x² − 15x = 0.
- 20.Factorise x² − 3x − 10.
- 21.The equation x² − 6x + k = 0 has exactly one solution. Work out the value of k.
- 22.By completing the square, find the turning point of the curve y = 3x² + 12x + 7.y = 3x² + 12x + 7
- 23.Solve 2x² − 32 = 0.
- 24.A quadratic curve has a root at x = −2 and its turning point has x-coordinate 3. Work out the curve's other root, using the symmetry of the graph.
Answer key
- (c) 5(x + y − 1) — Method: take out the highest common factor of all three terms and divide every term by it, the number term included. Working: the highest common factor of 5x, 5y and −5 is 5; dividing gives 5x ÷ 5 = x, 5y ÷ 5 = y and −5 ÷ 5 = −1, so the bracket holds x + y − 1. Answer: 5(x + y − 1), which multiplies back out to 5x + 5y − 5. The distractors: 5(x + y + 1) comes from dividing −5 by 5 and losing the minus sign; 5(x + y − 5) comes from dividing only the terms containing a letter by 5 and carrying the −5 into the bracket unchanged; 5(xy − 1) comes from collecting the unlike terms 5x and 5y as 5xy before factorising.
- (c) x = 2 or x = 3 — Method: factorise into two brackets whose numbers multiply to the constant term and add to the coefficient of x, then set each bracket equal to zero. Working: two numbers that multiply to 6 and add to −5 are −2 and −3, so x² − 5x + 6 = (x − 2)(x − 3) = 0; then x − 2 = 0 gives x = 2 and x − 3 = 0 gives x = 3. Answer: x = 2 or x = 3. The distractors: x = −2 or x = −3 comes from reading the numbers inside the brackets as the solutions instead of changing their signs; x = 1 or x = 6 comes from taking the first factor pair of 6 without checking that the pair adds to −5; x = 5 or x = 6 comes from reading the solutions straight off the 5 and the 6 in the equation.
- (b) 6x + 6 — Perimeter = 2[(2x + 5) + (x − 2)] = 2(3x + 3) = 6x + 6. A candidate who adds the length and width but forgets to double for the perimeter gets 3x + 3. A candidate who makes a sign error and adds 2 instead of subtracting it before doubling gets 2[(2x + 5) + (x + 2)] = 6x + 14. A candidate who multiplies the length and width instead of adding them, confusing the perimeter formula with the area formula, and then doubles that product, gets 2(2x + 5)(x − 2) = 4x² + 2x − 20.
- (c) x = 3 and x = −5 — To factorise x² + 2x − 15, find two numbers that multiply to −15 and add to 2: these are 5 and −3, since 5 × (−3) = −15 and 5 + (−3) = 2. So x² + 2x − 15 = (x + 5)(x − 3). Setting each factor to zero gives x = −5 and x = 3. Choosing x = −3 and x = 5 comes from swapping the signs of the correct roots. Choosing x = 5 and x = 3 uses the right pair of numbers, 5 and 3, but forgets that one of them must be negative for the product to equal −15. Choosing x = −15 and x = 1 mistakes the constant term, −15, for one of the roots, and pairs it oddly with x = 1.
- (d) x = 3 or x = −3 — Method: get x² on its own with a coefficient of 1, then take the square root of both sides and keep both the positive and the negative root. Working: dividing 2x² = 18 by 2 gives x² = 9, and the square root of 9 is 3, so x = 3 or x = −3; both check, because 2 × 9 = 18 either way. Answer: x = 3 or x = −3. The distractors: x = 9 or x = −9 comes from dividing by 2 and then forgetting to take the square root; x = 4 or x = −4 comes from subtracting 2 from 18 instead of dividing by it, giving x² = 16; x = 6 or x = −6 comes from multiplying by 2 instead of dividing, giving x² = 36.
- (c) x = −2 or x = 4 — The solutions of x² − 2x − 8 = 0 are the x-values where y = 0. From the table, y = 0 when x = −2 and when x = 4, so those are the two solutions. Distractor origins: x = −1 or x = 3 picks the pair of x-values that give equal (but non-zero) y-values instead of y = 0; x = 0 or x = −8 mixes up an x-value with its corresponding y-value; x = −2 only reads off one of the two roots and misses the other.
- (c) 25 — Method: read off a, b and c with their signs and substitute them into b² − 4ac. Working: for 2x² + 3x − 2 = 0, a = 2, b = 3 and c = −2, so b² − 4ac = 3² − 4 × 2 × (−2) = 9 − (−16) = 9 + 16 = 25. Answer: 25. The distractors: −7 comes from taking c as +2, which gives 9 − 16; 22 comes from working b² as 2 × 3 = 6 and then 6 + 16; 13 comes from leaving the 4 out of 4ac and working 9 − 2 × (−2).
- (b) (3x + 1)(2x − 3) — To factorise 6x² − 7x − 3, look for two numbers that multiply to 6 × (−3) = −18 and add to −7: these are −9 and 2. Splitting the middle term gives 6x² − 9x + 2x − 3, which groups to 3x(2x − 3) + 1(2x − 3) = (3x + 1)(2x − 3). Writing (3x − 1)(2x + 3) comes from using the pair 9 and −2 instead — the right product but the wrong signs, giving +7x instead of −7x. Writing (6x − 1)(x + 3) comes from picking the factor pair 18 and −1: it multiplies to −18 correctly, but it adds to 17, not −7, so checking only the product splits the middle term as 6x² + 18x − x − 3 and pairs the wrong factors of 6 and 3 together. Writing (x − 3)(6x + 1) comes from that same unchecked pair used the other way round, splitting the middle term as 6x² + x − 18x − 3.
- (b) (2x + 1)/(x − 3) — Factorise both the numerator and the denominator before you cancel anything. The numerator 2x² + 7x + 3 factorises to (2x + 1)(x + 3), and the denominator x² − 9 is a difference of two squares, factorising to (x − 3)(x + 3). The (x + 3) factor is common to both, so it cancels, leaving (2x + 1)/(x − 3). Writing (2x + 1)/(x + 3) comes from factorising x² − 9 as (x + 3)² instead of (x − 3)(x + 3) — a difference of two squares always has one plus and one minus bracket. Writing (2x + 3)/(x − 3) comes from mis-factorising the numerator as (2x + 3)(x + 1) and then wrongly cancelling the (x + 1) against the denominator's (x + 3) as though they were the same bracket. Writing 2x + 1 comes from cancelling the (x + 3) factor correctly but then dropping the remaining (x − 3) on the denominator altogether.
- (d) (3x − 2)(x + 4) — For 3x² + 10x − 8, find two numbers multiplying to 3 × (−8) = −24 and adding to 10: these are 12 and −2. Rewrite: 3x² + 12x − 2x − 8 = 3x(x + 4) − 2(x + 4) = (3x − 2)(x + 4). Choosing (3x + 2)(x − 4) expands to 3x² − 10x − 8 — the correct factor pair but the wrong signs, giving the middle term the wrong sign. Choosing (x − 2)(3x + 4) expands to 3x² − 2x − 8 — the 3 is attached to the wrong bracket, changing which terms combine for the x-coefficient. Choosing (3x − 4)(x + 2) expands to 3x² + 2x − 8 — this uses 4 and 2 instead of the correct pair 12 and 2, so the middle term does not come to 10x.
- (b) x = 3, y = 4 — −x² + 6x − 5 = −(x² − 6x) − 5 = −[(x − 3)² − 9] − 5 = −(x − 3)² + 9 − 5 = −(x − 3)² + 4. Because the coefficient of x² is negative, −(x − 3)² is at most zero, so this turning point is a maximum. Substituting x = 3 gives (x − 3)² = 0, so y = 4, confirming the maximum value 4 at x = 3: turning point (3, 4). Using 6 instead of half of 6 inside the bracket — forgetting to halve before completing the square — lands on turning point (6, 31), wrong, because only half the coefficient belongs inside the bracket. Reading the bracket's sign directly as the turning point's x-coordinate gives (−3, 4) — wrong, because (x − 3)² is zero at x = 3, not x = −3. Computing 5 − 9 = −4 instead of 9 − 5 = 4 flips the sign of the constant, giving (3, −4) — wrong, since the constant must be evaluated as 9 minus 5, not 5 minus 9. Whenever the leading coefficient is negative, the turning point is a maximum, not a minimum — check by substituting back into the original equation.
- (d) The roots of x² − 6x + 5 = 0 are x = 1 and x = 5 (since it factorises to (x − 1)(x − 5)), so by symmetry the turning point has x-coordinate 3, not 6. — Factorising, x² − 6x + 5 = (x − 1)(x − 5), so the roots are x = 1 and x = 5. The turning point lies midway between the roots by symmetry: (1 + 5) ÷ 2 = 3. The coefficient of x has no direct role in locating the turning point this way. The option giving −6 makes an arbitrary sign change with no mathematical basis. The option giving 5 wrongly takes just one of the two roots instead of their midpoint.
- (a) t = 0 or t = 4 — The ball is at ground level exactly when h = 0. From the table, h = 0 at t = 0 and at t = 4, so those are the two times. Distractor origins: t = 1 or t = 3 picks the times with equal (but non-zero) height instead of ground level; t = 2 picks the time of maximum height instead of ground level; t = 0 finds only the starting time and misses the second one.
- (d) x = −4, y = −19 — x² + 8x − 3 = (x + 4)² − 4² − 3 = (x + 4)² − 19. Substituting x = −4: (−4)² = 16, 8 × (−4) = −32, so 16 − 32 − 3 = −19, confirming the minimum value −19 at x = −4: turning point (−4, −19). Using 8 instead of half of it inside the bracket gives (x + 8)² − 67, turning point (−8, −67) — wrong, because only half the coefficient of x belongs inside the bracket. Reading the bracket's sign directly as the turning point's x-coordinate gives (4, −19) — wrong, because (x + 4)² is zero at x = −4, not x = 4. Computing 16 + 3 = 19 instead of −3 − 16 = −19 flips the sign of the constant, giving (−4, 19) — wrong, since the completed square's constant must be evaluated as −3 minus 16, not 16 plus 3. Check by substitution whenever the sign of a constant feels uncertain.
- (c) x = 2, y = 5 — x² − 4x + 9 = (x − 2)² − 2² + 9 = (x − 2)² + 5. Substituting x = 2: 2² = 4, 4 × 2 = 8, so 4 − 8 + 9 = 5, confirming the minimum value 5 at x = 2: turning point (2, 5). Using −4 instead of half of it inside the bracket gives (x − 4)² − 7, turning point (4, −7) — wrong, because only half the coefficient of x belongs inside the bracket. Reading the bracket's sign directly as the turning point's x-coordinate gives (−2, 5) — wrong, because (x − 2)² is zero at x = 2, not x = −2. Computing 4 − 9 = −5 instead of 9 − 4 = 5 flips the sign of the constant, giving (2, −5) — wrong, since the completed square's constant must be evaluated as 9 minus 4, not 4 minus 9. Substitute the x-value back into the original equation whenever you are unsure of a sign.
- (d) x² − 49 — Area = length × width = (x + 7)(x − 7). Expanding: x × x = x², x × (−7) = −7x, 7 × x = 7x, 7 × (−7) = −49. The two middle terms −7x and 7x cancel, leaving x² − 49. A candidate who misremembers the difference-of-two-squares result as a sum gets x² + 49. A candidate who makes a sign error and treats both middle terms as −7x instead of cancelling gets x² − 14x − 49. A candidate who confuses area with perimeter and simply adds the length and width gets 2x.
- (d) (5x − 1)/(x² − x − 2) — The common denominator is (x + 1)(x − 2) = x² − x − 2. The numerator becomes 2(x − 2) + 3(x + 1) = (2x − 4) + (3x + 3) = 5x − 1, so the sum is (5x − 1)/(x² − x − 2). Choosing 5/(2x − 1) adds the numerators (2 + 3 = 5) and the denominators ((x + 1) + (x − 2) = 2x − 1) directly, which is not how fractions add. Choosing (5x + 1)/(x² − x − 2) comes from expanding 2(x − 2) as 2x − 2 instead of 2x − 4, losing part of the constant term. Choosing (5x − 1)/(x² + x − 2) has the correct numerator but the wrong sign on the x-term when (x + 1)(x − 2) is expanded.
- (a) 3x/2 — Factorise top and bottom first: 6x³ − 15x² = 3x²(2x − 5), and 4x² − 10x = 2x(2x − 5). The bracket (2x − 5) is common to both, so it cancels, leaving 3x²/(2x); dividing the power of x, 3x² ÷ x = 3x, gives 3x/2. Writing 3x²/2 cancels the (2x − 5) correctly and removes the denominator's x, but never reduces the power of x left in the numerator — 3x² ÷ x should give 3x, not stay as 3x². Writing 3/2 cancels the (2x − 5) correctly but then drops the x from the numerator altogether, treating 3x² over x as if it cancelled completely to 3 instead of reducing to 3x. Writing −3x/2 comes from factorising the denominator with the wrong sign, as 2x(5 − 2x) instead of 2x(2x − 5); cancelling (5 − 2x) against the numerator's (2x − 5) then needs an extra minus sign, which flips the answer to −3x/2.
- (c) x = 0 or x = 3 — Method: take out the common factor 5x: 5x(x − 3) = 0, so 5x = 0 or x − 3 = 0, giving x = 0 or x = 3. Distractor origins: x = 0 or x = 15 comes from forgetting to divide the second term by the common factor 5x correctly, leaving 15 instead of 3; x = 3 loses the solution x = 0 by dividing both sides by x; x = 5 or x = 3 mistakes the coefficient 5 itself for one of the solutions.
- (b) (x − 5)(x + 2) — We need two numbers that multiply to −10 and add to −3: these are −5 and 2, since −5 × 2 = −10 and −5 + 2 = −3. So x² − 3x − 10 = (x − 5)(x + 2). A candidate who swaps the signs, using +5 and −2, gets (x + 5)(x − 2), which expands to x² + 3x − 10 — the wrong middle term. A candidate who picks the factor pair 1 and 10 instead of 2 and 5 gets (x − 10)(x + 1), which expands to x² − 9x − 10. A candidate who makes both factors negative gets (x − 5)(x − 2), which expands to x² − 7x + 10 — the wrong sign on the constant term.
- (b) k = 9 — Method: complete the square, because a squared bracket is equal to zero for exactly one value of x. Working: x² − 6x = (x − 3)² − 9, so the equation becomes (x − 3)² − 9 + k = 0, that is (x − 3)² = 9 − k; there is exactly one solution when 9 − k = 0, so k = 9 and the equation reads x² − 6x + 9 = 0 with the repeated solution x = 3. Answer: k = 9. The distractors: k = 3 comes from halving the 6 and not squaring the result; k = 36 comes from squaring the whole of 6 instead of half of it; k = −9 comes from solving 9 − k = 0 with the sign of k the wrong way round.
- (d) x = −2, y = −5 — 3x² + 12x + 7 rewrites as 3(x² + 4x) + 7, then as 3[(x + 2)² − 4] + 7, which simplifies to 3(x + 2)² − 5, since −3 × 4 + 7 = −5. Substituting x = −2: 3 × (−2)² = 12, 12 × (−2) = −24, so 12 − 24 + 7 = −5, confirming the minimum value −5 at x = −2: turning point x = −2, y = −5. Halving b instead of halving b/a — using −4 as the shift instead of −2 — lands on turning point x = −4, y = −41, which is wrong because when a ≠ 1 the shift inside the bracket is b/(2a), not b/a alone. Reading the bracket's sign directly as the turning point's x-coordinate gives x = 2, y = −5 — wrong, because (x + 2)² is zero at x = −2, not x = 2. Computing 12 − 7 = 5 instead of 7 − 12 = −5 flips the sign of the constant, giving x = −2, y = 5 — wrong, since the completed square's constant must be evaluated as 7 minus 12, not 12 minus 7. Whenever a ≠ 1, factor a out of the x² and x terms first, and always check a turning point by substituting back into the original equation.
- (d) x = 4 or x = −4 — Method: divide both sides by 2 to get x² = 16, then take the square root of both sides: x = 4 or x = −4. Distractor origins: x = 4 forgets the negative root; x = 8 comes from halving 16 instead of taking its square root; x = 16 stops at x² = 16 without ever taking the square root.
- (c) x = 8 — The turning point lies exactly halfway between the two roots. If the other root is r, the midpoint of −2 and r must be 3, so (−2 + r) ÷ 2 = 3, giving r = 8. Choosing x = 5 comes from adding 2 and 3 rather than using the midpoint relationship correctly. Choosing x = 1 comes from subtracting 2 from 3 instead of reflecting −2 across the turning point. Choosing x = −8 finds the right distance but then reflects in the y-axis instead of in the line of symmetry x = 3, so the sign of the answer is flipped.
What is on this worksheet?
The sheet holds 24 questions drawn from the MathsUK bank — the content area covered: Algebra (statements A18, A11, A4). It is pitched at GCSE Higher and takes about 45 minutes to work through in full. It is built for independent practice, with full answers at the end for self-marking.
How to use the sheet well
- Print it or open it on screen — both work. Printing is A4; the screen view fits phones and tablets.
- Do all 24 questions before checking — about 45 minutes is the guide, but there is no time pressure.
- Check the answers — press “Show answers” or print the answer page separately.
- Redo the questions you got wrong — twice as effective as doing 24 fresh ones.
- “New questions” — builds a fresh sheet on the same statements, so you can practise again without repeats.
Why this sheet helps
MathsUK worksheets use questions graded by difficulty and a fair spread of correct-answer positions (the answer is not always (a)) — so the student really has to think about each question rather than guess a pattern. Every question is tagged to a DfE content statement and checked before it enters the bank. The answers come with a step-by-step explanation, not just a value — so a wrong answer becomes a lesson.
Similar worksheets worth a look
- 🧮 Paper 1 non-calculator warm-up — Higher · 20 questions · ~25 min
- ⚖️ Foundation to Higher crossover check · 20 questions · ~35 min
- ⚗️ Ratio and proportion mastery — Higher · 24 questions · ~45 min
- ⭕ Circle theorems practice · 18 questions · ~40 min