📈 Quadratics: factorise, complete the square, formula

Answer key

1. (a) x = 4 ± √13 — Method: halve the coefficient of x to form the bracket, subtract the square of that number to keep the expression equal to the original, then rearrange and take the square root of both sides. Working: half of −8 is −4, so x² − 8x + 3 = (x − 4)² − 16 + 3 = (x − 4)² − 13; setting this equal to zero gives (x − 4)² = 13, so x − 4 = ±√13 and x = 4 ± √13. Answer: x = 4 ± √13. The distractors: x = 8 ± √13 comes from putting the whole coefficient 8 inside the bracket instead of half of it; x = 4 ± √19 comes from adding 16 and 3 rather than subtracting 3 from 16; x = −4 ± √13 comes from writing the bracket as (x + 4)², which reverses the sign of the number that comes out of it.
2. (d) y = (x + 3)(x − 5) — A root at x = −3 means the matching bracket must be zero when x = −3, so the bracket is (x − (−3)) = (x + 3). A root at x = 5 means the other bracket is (x − 5). So the equation is y = (x + 3)(x − 5); checking the y-intercept, (0 + 3)(0 − 5) = 3 × (−5) = −15, which matches the given value. The option (x − 3)(x + 5) swaps the signs of both roots. The option (x + 3)(x + 5) keeps the correct sign for the first root but gets the second wrong. The option (x − 3)(x − 5) gets the first root's sign wrong.
3. (d) t = 5 — The maximum height occurs halfway between the two times when the ball is at ground level: the midpoint of t = 1 and t = 9 is (1 + 9) ÷ 2 = 5, so the ball reaches its maximum height at t = 5 seconds. Getting t = 4 comes from halving the DIFFERENCE between the times, 9 − 1 = 8, then 8 ÷ 2 = 4, instead of finding their midpoint. Getting t = 8 uses that difference, 9 − 1 = 8, as if the gap between the two times were itself the time of the maximum. Getting t = 10 adds the two times, 1 + 9 = 10, but forgets to divide by 2.
4. (b) −23 — Expand two of the three brackets first: (x + 5)(x − 2) = x² + 3x − 10. Then multiply this by the remaining bracket: (2x − 1)(x² + 3x − 10) = 2x³ + 6x² − 20x − x² − 3x + 10, which simplifies to 2x³ + 5x² − 23x + 10, so the coefficient of x is −23. Writing −13 comes from a sign slip in the first expansion, combining 5x − 2x as −5x − 2x = −7x instead of +3x, which carries through to a wrong final coefficient. Writing −20 comes from forgetting to distribute the −1 across every term of x² + 3x − 10, dropping the −1 × 3x = −3x contribution. Writing 10 comes from reading off the constant term of the expansion instead of the coefficient of x.
5. (b) 5 and −6 — Method: turn the sentence into an equation in one letter, collect every term on one side so it reads as a quadratic equal to zero, then factorise. Working: if the number is x then x² + x = 30, which rearranges to x² + x − 30 = 0; two numbers that multiply to −30 and add to 1 are 6 and −5, so (x + 6)(x − 5) = 0 and x = −6 or x = 5. Both values work: 5 + 25 = 30 and −6 + 36 = 30. Answer: 5 and −6. The distractors: 6 and −5 comes from reading the numbers inside the brackets as the solutions without changing their signs; 5 only comes from discarding the negative solution, although nothing in the question rules out a negative number; 5 and 6 comes from hunting for a factor pair of 30 instead of forming and solving the quadratic.
6. (c) x = 3 and x = −5 — To factorise x² + 2x − 15, find two numbers that multiply to −15 and add to 2: these are 5 and −3, since 5 × (−3) = −15 and 5 + (−3) = 2. So x² + 2x − 15 = (x + 5)(x − 3). Setting each factor to zero gives x = −5 and x = 3. Choosing x = −3 and x = 5 comes from swapping the signs of the correct roots. Choosing x = 5 and x = 3 uses the right pair of numbers, 5 and 3, but forgets that one of them must be negative for the product to equal −15. Choosing x = −15 and x = 1 mistakes the constant term, −15, for one of the roots, and pairs it oddly with x = 1.
7. (a) x = 3/2 or x = −3/2 — Method: the equation has an x² term and a number but no x term, so make x² the subject and then take the square root of both sides, keeping the negative root as well as the positive one. Working: adding 9 to both sides of 4x² − 9 = 0 gives 4x² = 9, and dividing both sides by 4 gives x² = 9/4. Square-rooting the top and the bottom of 9/4 gives 3/2, so x = 3/2 or x = −3/2, and each value checks out because 4 × 9/4 − 9 = 0. Answer: x = 3/2 or x = −3/2. The distractors: x = 3 or x = −3 comes from square-rooting both sides of 4x² = 9 without first dividing by the 4, so the coefficient of x² is ignored; x = 9/4 or x = −9/4 comes from stopping at x² = 9/4 and writing that value down as x, leaving the square root undone; x = 3/2 only comes from taking the positive square root of 9/4 and losing the negative solution.
8. (a) −10 — Method: multiply each bracket out, treating the second bracket as being multiplied by −3 because it is subtracted, then collect like terms. Working: 4(2x − 1) = 8x − 4 and −3(x + 2) = −3x − 6, so the expression becomes 8x − 4 − 3x − 6 − 5x; the x terms give 8x − 3x − 5x = 0, so no term in x survives, and the numbers give −4 − 6 = −10. Answer: −10. The distractors: 2 comes from expanding −3(x + 2) as −3x + 6, leaving the numbers −4 + 6; 5x − 10 comes from forgetting the final −5x, so the x terms give 8x − 3x = 5x; −7 comes from multiplying the 4 over only the first term of its bracket, giving 8x − 1 and so the numbers −1 − 6.
9. (d) 3x² + 4x − 7 — Method: the minus sign in front of the second bracket changes the sign of every term inside it; then collect like terms. Working: removing the brackets gives 5x² + 3x − 2 − 2x² + x − 5; the squared terms give 5x² − 2x² = 3x², the x terms give 3x + x = 4x, and the number terms give −2 − 5 = −7. Answer: 3x² + 4x − 7. The distractors: 7x² + 2x + 3 comes from adding the two brackets instead of subtracting, giving 5x² + 2x², 3x − x and −2 + 5; 3x² + 2x + 3 comes from applying the minus sign to 2x² only, leaving −x and +5 unchanged so that 3x − x = 2x and −2 + 5 = 3; 3x² + 4x + 3 comes from changing the signs of the terms with letters but leaving +5 as it stood, so the number terms give −2 + 5 = 3.
10. (d) a/2 — Method: write both terms over the same denominator, subtract the numerators, then cancel the fraction down. Working: 6 is a multiple of 3, so a/3 is rewritten as 2a/6; the calculation becomes 5a/6 − 2a/6 = 3a/6, and dividing numerator and denominator by 3 gives a/2. Answer: a/2. The distractors: 4a/3 comes from subtracting the denominators as well as the numerators, giving (5 − 1)a over (6 − 3); 2a/3 comes from subtracting 1 from 5 without first rewriting a/3 as 2a/6, giving 4a/6; 7a/6 comes from adding the two fractions instead of subtracting them, giving 5a/6 + 2a/6.
11. (b) x = 2, y = −5 — 2x² − 8x + 3 rewrites as 2(x² − 4x) + 3, then as 2[(x − 2)² − 4] + 3, which simplifies to 2(x − 2)² − 5, since −2 × 4 + 3 = −5. Substituting x = 2: 2 × 2² = 8, 8 × 2 = 16, so 8 − 16 + 3 = −5, confirming the minimum value −5 at x = 2: turning point x = 2, y = −5. Halving b instead of halving b/a — using 4 as the shift instead of 2 — lands on turning point x = 4, y = −29, which is wrong because when a ≠ 1 the shift inside the bracket is b/(2a), not b/a alone. Reading the bracket's sign directly as the turning point's x-coordinate gives x = −2, y = −5 — wrong, because (x − 2)² is zero at x = 2, not x = −2. Computing 8 − 3 = 5 instead of 3 − 8 = −5 flips the sign of the constant, giving x = 2, y = 5 — wrong, since the completed square's constant must be evaluated as 3 minus 8, not 8 minus 3. Whenever a ≠ 1, factor a out of the x² and x terms first, and always check a turning point by substituting back into the original equation.
12. (c) x = 5, y = 5 — x² − 10x + 30 = (x − 5)² − 5² + 30 = (x − 5)² + 5. Substituting x = 5: 5² = 25, 10 × 5 = 50, so 25 − 50 + 30 = 5, confirming the minimum value 5 at x = 5: turning point (5, 5). Using −10 instead of half of it inside the bracket gives (x − 10)² − 70, turning point (10, −70) — wrong, because only half the coefficient of x belongs inside the bracket. Reading the bracket's sign directly as the turning point's x-coordinate gives (−5, 5) — wrong, because (x − 5)² is zero at x = 5, not x = −5. Computing 25 − 30 = −5 instead of 30 − 25 = 5 flips the sign of the constant, giving (5, −5) — wrong, since the completed square's constant must be evaluated as 30 minus 25, not 25 minus 30. Always check a turning point by substituting its x-value back into the original equation.
13. (d) x² − 6x + 9 — Method: squaring a bracket means multiplying that bracket by itself, so expand (x − 3)(x − 3) term by term and then collect like terms. Working: x × x = x², x × (−3) = −3x, (−3) × x = −3x and (−3) × (−3) = 9, giving x² − 3x − 3x + 9, and the two middle terms collect to −6x. Answer: x² − 6x + 9. The distractors: x² − 3x + 9 comes from writing down only one of the two middle products instead of both; x² + 6x + 9 comes from treating (−3) × x as +3x, so the middle terms are added rather than subtracted; x² − 9 comes from treating the square as the difference of two squares (x − 3)(x + 3).
14. (d) The roots of x² − 6x + 5 = 0 are x = 1 and x = 5 (since it factorises to (x − 1)(x − 5)), so by symmetry the turning point has x-coordinate 3, not 6. — Factorising, x² − 6x + 5 = (x − 1)(x − 5), so the roots are x = 1 and x = 5. The turning point lies midway between the roots by symmetry: (1 + 5) ÷ 2 = 3. The coefficient of x has no direct role in locating the turning point this way. The option giving −6 makes an arbitrary sign change with no mathematical basis. The option giving 5 wrongly takes just one of the two roots instead of their midpoint.
15. (b) (x − 3)/(x + 2) — Factorise both: x² − 9 = (x − 3)(x + 3) (difference of two squares), and x² + 5x + 6 = (x + 2)(x + 3) (two numbers multiplying to 6 and adding to 5, namely 2 and 3). The factor (x + 3) is common to both, so it cancels, leaving (x − 3)/(x + 2). Choosing −9/(5x + 6) comes from cancelling the x² terms directly without factorising first — x² is not a common factor of the whole numerator or denominator. Choosing (x + 3)/(x + 2) cancels the (x − 3) factor instead of the shared (x + 3) factor, and (x − 3) does not appear in the denominator to cancel with. Choosing x − 3 cancels the whole denominator (x + 2) as though it were equal to 1.
16. (d) (x − 8)(x + 8) — x² − 64 = x² − 8², a difference of two squares, which factorises as (x − 8)(x + 8). A candidate who treats it as a perfect square with a repeated negative factor gets (x − 8)(x − 8), which expands to x² − 16x + 64 — wrong on both the middle and constant terms. A candidate who uses a repeated positive factor gets (x + 8)(x + 8), which expands to x² + 16x + 64. A candidate who picks a different factor pair of 64, such as 4 and 16, without checking that the middle term cancels, gets (x − 4)(x + 16), which expands to x² + 12x − 64 — the wrong middle term.
17. (d) x = 3 or x = −3 — Method: get x² on its own with a coefficient of 1, then take the square root of both sides and keep both the positive and the negative root. Working: dividing 2x² = 18 by 2 gives x² = 9, and the square root of 9 is 3, so x = 3 or x = −3; both check, because 2 × 9 = 18 either way. Answer: x = 3 or x = −3. The distractors: x = 9 or x = −9 comes from dividing by 2 and then forgetting to take the square root; x = 4 or x = −4 comes from subtracting 2 from 18 instead of dividing by it, giving x² = 16; x = 6 or x = −6 comes from multiplying by 2 instead of dividing, giving x² = 36.
18. (d) x = 0 or x = 6 — Method: factorise by taking out the common factor x: x(x − 6) = 0, so x = 0 or x − 6 = 0, giving x = 0 or x = 6. Distractor origins: x = 6 comes from dividing both sides by x, which loses the solution x = 0; x = 0 stops after finding only one factor; x = 3 comes from halving the coefficient of x instead of factorising.
19. (d) If the graph has two real roots, they are equal and opposite in value, so they sum to zero. — A turning point on the y-axis means the graph's axis of symmetry is the line x = 0, so any two roots must be symmetrical about x = 0 — equal in size but opposite in sign, summing to zero. The graph could still have no real roots, but that is not guaranteed just from the turning point's position, so the option claiming it must have none is too strong. The roots do not have to both be positive — if real, one is positive and one negative (or both are zero). The graph does not have to touch the x-axis at exactly one point either; it could cross at two symmetrical points, touch at one point, or miss the x-axis entirely.
20. (a) x = 4 or x = −3 — Method: find two numbers that multiply to give −12 and add to give −1 — these are −4 and 3. So x² − x − 12 = (x − 4)(x + 3) = 0, giving x = 4 or x = −3. Distractor origins: x = −4 or x = 3 has the signs the wrong way round; x = 4 or x = 3 makes both roots positive, ignoring the sign of −12; x = 12 or x = −1 comes from reading off the coefficient and the constant directly instead of factorising.
21. (a) x ≈ 6.70 — Since the two roots sum to 7, the other root is 7 − 0.30 = 6.70. The option 7.30 comes from adding the given root to 7 instead of subtracting it. The option 6.30 comes from subtracting 0.70 (one minus the given root) rather than the given root itself. The option 0.70 confuses the required root with the amount by which the given root falls short of 1.
22. (b) (3x + 1)(2x − 3) — To factorise 6x² − 7x − 3, look for two numbers that multiply to 6 × (−3) = −18 and add to −7: these are −9 and 2. Splitting the middle term gives 6x² − 9x + 2x − 3, which groups to 3x(2x − 3) + 1(2x − 3) = (3x + 1)(2x − 3). Writing (3x − 1)(2x + 3) comes from using the pair 9 and −2 instead — the right product but the wrong signs, giving +7x instead of −7x. Writing (6x − 1)(x + 3) comes from picking the factor pair 18 and −1: it multiplies to −18 correctly, but it adds to 17, not −7, so checking only the product splits the middle term as 6x² + 18x − x − 3 and pairs the wrong factors of 6 and 3 together. Writing (x − 3)(6x + 1) comes from that same unchecked pair used the other way round, splitting the middle term as 6x² + x − 18x − 3.
23. (d) x = 3 — The table is symmetrical about the turning point: y = 0 at both x = 1 and x = 5, and the lowest value, y = −4, occurs exactly halfway between them, at x = 3. Choosing x = 5 picks one of the roots rather than the midpoint between them. Choosing x = 1 picks the other root for the same reason. Choosing x = 6 picks the x-value where y returns to its starting value of 5, which is not the turning point.
24. (c) 12 cm — For a square, area = side². So side² = 144, giving side = ±12. Since a length must be positive, the side length is 12 cm. A candidate who gives both square roots without rejecting the negative one, which cannot be a length, answers 12 cm or −12 cm. A candidate who halves 144 instead of taking its square root gets 72 cm. A candidate who divides 144 by 4, confusing the area formula with a perimeter calculation, gets 36 cm.