Printable · GCSE Foundation · ages 14-16
Algebraic notation worksheet — GCSE Foundation
Fifteen questions on "algebraic notation" — DfE statement A1. Print it, or print three versions so neighbours cannot copy by letter; the key gives the letter for each version.
Non-calculator
Algebraic notation worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.Write down the expression that means the same as p + p + p + q.
- 2.Write down the expression that means the same as m × m × m × n.
- 3.Which expression means 'y squared, multiplied by 3'?
- 4.Write down 0.2x with its coefficient written as a fraction in its simplest form.
- 5.A packet contains s sweets. The sweets are shared equally between f friends. Write an expression for the number of sweets each friend receives.
- 6.Write down the expression that means the same as m² × m × 3.
- 7.A rectangular field has length (3a + 2) metres and width (a − 1) metres. Write a simplified expression for the perimeter of the field.
- 8.a = 2 and b = 5. Work out the value of a²b.
- 9.Write down the expression that means the same as 'subtract 5 from n, then divide the result by 2'.
- 10.Which expression means 'add 3 to n, then multiply the result by 4'?
- 11.Which expression means the same as a × a × a?
- 12.Simplify p + p + p.
- 13.Write down the expression that means the same as (x + 7) ÷ 4.
- 14.a = 2 and b = 5. Work out the value of ab².
- 15.x = 5. Work out the value of 3x² − 4.
Answer key
- (a) 3p + q — Repeated addition of the same letter is written as a multiple of that letter, so p + p + p is 3 lots of p, which is 3p. The letter q is added once only, so it stays as a separate term and the result is 3p + q. Writing 3pq multiplies the q by 3 and by p as well; p³ + q records repeated multiplication rather than repeated addition; 3(p + q) multiplies both letters by 3.
- (d) m³n — m × m × m × n means three m's multiplied together, then multiplied by n, which is written as m³n. Putting the power of 3 on n instead of m, mn³, puts the power on the wrong letter. Writing 3mn treats the repeated multiplication as if it were repeated addition, as if it meant 3 × m × n. Writing m³ + n adds the n instead of multiplying it in.
- (a) 3y² — 'y squared, multiplied by 3' means the square is applied to y only, and the result is then multiplied by 3, written as 3y². Writing y³ mistakes the multiplication by 3 for an extra factor of y, adding to the power instead of using a coefficient. Writing (3y)² squares the whole of 3y, including the 3, which gives 9y² rather than 3y² — the square should apply to y alone. Writing 3 + y² adds the 3 instead of multiplying by it. The expression for 'y squared, multiplied by 3' is 3y².
- (a) x/5 — Read the decimal as a fraction first: 0.2 is 2 tenths, so the coefficient is 2/10. Dividing the numerator and the denominator by 2 cancels this to 1/5, and a coefficient of 1/5 in front of a letter is written x/5. Reading the digit 2 as 'a half' gives x/2; reading 0.2 as 1/20 gives x/20; dividing only the denominator by 2 leaves 2/5, which is the coefficient 0.4 and twice as large as it should be.
- (a) s/f — Sharing s sweets equally between f friends means dividing the total by the number of friends, written as a fraction: s/f. Writing f/s divides the wrong way round, sharing the number of friends between the sweets instead of the sweets between the friends. Writing s − f mistakes sharing for taking away, subtracting the number of friends from the number of sweets. Writing sf multiplies the two quantities together, which would make the total larger rather than splitting it into smaller equal parts. The number of sweets each friend receives is s/f.
- (d) 3m³ — Method: multiply the powers of m by adding their indices, then bring the number coefficient to the front. Working: m² × m has indices 2 and 1; add them to get 3, giving m³, then × 3 gives 3m³. Answer: 3m³. 3m² comes from multiplying the indices instead of adding them: 2 × 1 = 2, giving m², then × 3 = 3m². m³ comes from correctly combining the m's but dropping the coefficient 3. m⁶ comes from multiplying the index by the coefficient instead of writing the coefficient in front: taking the 2 in m² and the 3 to give m raised to the power 2 × 3, which is m⁶, with the lone m left out.
- (c) 8a + 2 — The perimeter of a rectangle is twice the length plus twice the width: P = 2(3a + 2) + 2(a − 1) = (6a + 4) + (2a − 2) = 8a + 2. Answering 5a adds the length and width once each but doubles only one of them, missing that a rectangle has two of each side. Answering 8a + 6 distributes the 2 into (a − 1) correctly as far as 2a, but then adds 2 instead of subtracting it, as though the bracket had been (a + 1). Answering 12a + 8 uses the length for all four sides instead of using the length twice and the width twice, as if the field were a square with side (3a + 2). The perimeter of the field is (8a + 2) metres.
- (b) 20 — a²b means a² multiplied by b: a² = 2² = 4, and 4 × 5 = 20. Reading the expression as (ab)² instead of a²b gives (2 × 5)² = 100. Squaring b instead of a, 2 × 5² = 50, squares the wrong letter. Adding a² and b instead of multiplying them, 2² + 5 = 9, uses the wrong operation.
- (a) (n − 5)/2 — Method: do the subtraction first, keep it together as a single bracket, then divide that whole bracket by 2. Working: 'subtract 5 from n' is (n − 5); 'divide the result by 2' means the whole bracket goes over 2, giving (n − 5)/2. Answer: (n − 5)/2. n/2 − 5 comes from dividing n by 2 first and only then subtracting 5, the wrong order. 2(n − 5) comes from multiplying by 2 instead of dividing. (5 − n)/2 comes from subtracting n from 5 instead of subtracting 5 from n, the wrong way round.
- (c) 4(n + 3) — 'Add 3 to n' must happen before 'multiply the result by 4', so the addition needs brackets to show it happens first: 4(n + 3). Writing 4n + 3 multiplies n by 4 immediately and only adds the 3 afterwards, which reverses the order the words describe. Writing n + 3 × 4 only multiplies the 3 by 4, and adds n as a separate, unmultiplied term — it treats 'the result' as just the 3, not the whole of n + 3. Writing 3(n + 4) keeps the correct structure but swaps which number is added and which is multiplied. The expression for 'add 3 to n, then multiply the result by 4' is 4(n + 3).
- (c) a³ — a × a × a means a multiplied by itself three times, which is written using powers as a³ — the small 3 shows how many times a is multiplied by itself. Writing 3a instead uses the 3 as a coefficient, as if the expression meant a + a + a (three lots of a added together) rather than three a's multiplied together. Writing a² only accounts for two of the three a's being multiplied together, missing one factor. Writing 3 + a treats the repeated multiplication as an addition of 3 and a, which has no connection to the original expression. The expression that means a × a × a is a³.
- (b) 3p — p + p + p means three lots of p added together, and repeated addition of the same term is written as a coefficient: 3p. Writing p³ mistakes the repeated addition for repeated multiplication, as if the expression had been p × p × p. Writing 3 + p adds the number of terms (3) onto p as a separate constant, instead of writing 3 as a coefficient of p. Writing just p forgets to count the terms at all, as though repeating the same letter makes no difference. The simplified expression is 3p.
- (c) (x + 7)/4 — Method: dividing an expression by a number is written as a fraction, with the whole expression on top. Working: (x + 7) ÷ 4 = (x + 7)/4. Answer: (x + 7)/4. 4/(x + 7) comes from writing the numbers the wrong way round, putting 4 on top. 4(x + 7) comes from reading ÷ as ×, multiplying instead of dividing. (x + 7) − 4 comes from reading ÷ as −, subtracting instead of dividing.
- (a) 50 — Method: in ab², only the b is squared, so square b first, then multiply by a. Working: b² = 5² = 25, then a × b² = 2 × 25 = 50. Answer: 50. 100 comes from squaring the product ab instead of just b: (2 × 5)² = 100. 20 comes from squaring a instead of b: a² × b = 4 × 5 = 20. 10 comes from ignoring the square altogether and working out a × b = 2 × 5 = 10.
- (c) 71 — Method: square x first, then multiply by 3, then subtract 4, following the order of operations. Working: x² = 5² = 25; 3 × 25 = 75; 75 − 4 = 71. Answer: 71. 221 comes from squaring (3x) as a whole first: (3 × 5)² = 225, then − 4 = 221, squaring the coefficient along with x. 75 comes from correctly working out 3x² but forgetting to subtract the 4. 3 comes from subtracting the 4 from x before squaring: (5 − 4)² × 3 = 3, doing the operations in the wrong order.
Build your own mix at the worksheet builder.