Printable · GCSE Foundation · ages 14-16
Coordinates in all four quadrants worksheet — GCSE Foundation
Fifteen questions on "coordinates in all four quadrants" — DfE statement A8. Print it, or print three versions so neighbours cannot copy by letter; the key gives the letter for each version.
Coordinates in all four quadrants worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.A point has coordinates (x, y), where x + y = 0 and x is not 0. In which two quadrants could this point lie?
- 2.ABCD is a parallelogram. A has coordinates (−3, 1), B has coordinates (2, 1) and C has coordinates (4, 4). Work out the coordinates of D.
- 3.The point B has coordinates (−2, −2). In which quadrant is B?
- 4.A point has coordinates (−6, 9). Work out the sum of the x-coordinate and the y-coordinate.
- 5.The point F has x-coordinate −1 and lies 6 units above the x-axis. Write down the coordinates of F.
- 6.Point P has coordinates (2, −5). P is reflected in the x-axis to point Q. Write down the coordinates of Q.
- 7.The point C is 6 units to the right of the origin and 0 units up. Write down the coordinates of C.
- 8.Which of these points lies in the first quadrant?
- 9.A point has coordinates (x, y). In which two quadrants is the product x × y positive?
- 10.Point P has coordinates (5, 2). Point P is rotated 180° about the origin to point Q. Write down the coordinates of Q.
- 11.Work out the coordinates of the reflection of (6, −3) in the y-axis.
- 12.A triangle has vertices at (1, 1), (1, 5) and (6, 1). Work out the area of the triangle.
- 13.The point P has coordinates (0, 12). Write down the axis that P lies on and the y-coordinate of P.
- 14.Work out the coordinates of the midpoint of the line segment joining (−3, 5) and (7, 9).
- 15.Work out the coordinates of the point halfway between (−9, −2) and (−1, −2).
Answer key
- (c) Second and fourth — If x + y = 0 then y = −x, so x and y always have opposite signs, one positive and one negative. A point with a negative x and a positive y lies in the second quadrant, and a point with a positive x and a negative y lies in the fourth quadrant, so the point lies in the second or the fourth. A candidate who reads x + y = 0 as meaning x and y have the same sign picks First and third, which is where x × y is positive, not where x + y = 0. A candidate who decides that y must be the positive coordinate picks the two quadrants above the x-axis, First and second. A candidate who decides that y must be the negative coordinate picks the two quadrants below the x-axis, Third and fourth.
- (d) (−1, 4) — In parallelogram ABCD the side DC is parallel and equal to the side AB, so D = C − AB. The vector from A to B is (2 − (−3), 1 − 1) = (5, 0), so D = (4 − 5, 4 − 0) = (−1, 4). A candidate who adds this vector to C instead of subtracting it gets (4 + 5, 4 + 0) = (9, 4). A candidate who subtracts A's coordinates from C's rather than the vector AB, and drops the minus sign on −3 while doing so, works out (4 − 3, 4 − 1) and gets (1, 3). A candidate who makes only the y-part of that slip, working out 4 − 1 instead of 4 − 0, gets (−1, 3).
- (d) the third quadrant — Method: only the signs of the coordinates matter, so two coordinates equal in size still have to be read separately, one for each axis. Working: both coordinates of (−2, −2) are negative, so B lies to the left of the y-axis and below the x-axis; counting anticlockwise from the region where both coordinates are positive, left and below is the third region. Answer: the third quadrant. The distractors: 'the first quadrant' comes from ignoring both minus signs and treating the point as (2, 2); 'the second quadrant' comes from applying the minus sign to the x-coordinate only, as though the point were (−2, 2); 'the fourth quadrant' comes from applying it to the y-coordinate only, as though the point were (2, −2).
- (b) 3 — −6 + 9 = 3. A candidate who ignores the negative sign on the x-coordinate and adds the two positive values gets 6 + 9 = 15. A candidate who treats the y-coordinate as negative too gets −6 + (−9) = −15. A candidate who works out 9 − 6 correctly as 3 but then writes the answer with the wrong sign gets −3.
- (b) (−1, 6) — '6 units above the x-axis' gives a y-coordinate of 6, and the x-coordinate is given as −1, so F = (−1, 6). (6, −1) comes from swapping the x- and y-coordinates. (−1, −6) comes from treating 'above' as a negative direction instead of positive. (1, 6) comes from dropping the negative sign on the given x-coordinate.
- (c) (2, 5) — Reflecting in the x-axis keeps the x-coordinate the same and changes the sign of the y-coordinate: Q = (2, 5). (−2, −5) comes from reflecting in the y-axis instead, which changes the sign of the x-coordinate. (−2, 5) comes from reflecting in both axes. (2, −5) comes from not applying the reflection at all.
- (a) (6, 0) — Method: a pair of coordinates records movement from the origin, the across movement written first and the up or down movement second. Working: C is 6 units to the right of the origin, so the across number is 6; it is 0 units up, so the up number is 0; written in order that gives (6, 0), a point on the x-axis. Answer: (6, 0). The distractors: (0, 6) comes from writing the two movements the wrong way round; (0, 0) comes from reading '0 units up' as meaning the point never left the origin at all, which ignores the movement across; (7, 0) comes from counting the origin itself as the first unit while counting 6 units to the right.
- (d) (3, 5) — Method: the quadrant a point lies in is decided by the signs of its two coordinates, and in the first quadrant both coordinates are positive. Working: (−2, 3) has a negative x-coordinate, so it sits to the left of the y-axis; (4, −1) has a negative y-coordinate, so it sits below the x-axis; (−1, −4) has both coordinates negative; only (3, 5) has a positive x-coordinate and a positive y-coordinate. Answer: (3, 5). The distractors: (−2, 3) is chosen by candidates who check only the y-coordinate and take a positive height as enough; (4, −1) is chosen by those who check only the x-coordinate; (−1, −4) is chosen by those who number the quadrants from the bottom left, so that the region with two negative coordinates is called the first.
- (b) the first and the third — Method: the sign of a product depends only on the signs of the two numbers multiplied: like signs give a positive product and unlike signs a negative one, so look for the quadrants in which both coordinates carry the same sign. Working: in the first quadrant x and y are both positive, and positive times positive is positive; in the third quadrant both are negative, and negative times negative is positive as well; in the second quadrant x is negative while y is positive, and in the fourth x is positive while y is negative, so each of those gives a negative product. Answer: the first and the third. The distractors: 'the second and the fourth' comes from applying the rule for a NEGATIVE product, unlike signs, to a positive one; 'the first and the second' comes from testing only the y-coordinate and keeping the quadrants where the height is positive; 'the first and the fourth' comes from testing only the x-coordinate in the same way.
- (b) (−5, −2) — A rotation of 180° about the origin reverses the sign of both coordinates, so Q = (−5, −2). A candidate who reverses the sign of only the y-coordinate, as if reflecting in the x-axis, gets (5, −2). A candidate who reverses the sign of only the x-coordinate, as if reflecting in the y-axis, gets (−5, 2). A candidate who swaps the coordinates instead of reversing their signs gets (2, 5).
- (a) (−6, −3) — Reflecting in the y-axis changes the sign of the x-coordinate and keeps the y-coordinate the same: (−6, −3). (6, 3) comes from reflecting in the x-axis instead, which changes the sign of the y-coordinate. (−6, 3) comes from reflecting in both axes. (6, −3) comes from not applying the reflection at all.
- (d) 10 — The right angle is at (1, 1). The vertical side has length 5 − 1 = 4 and the horizontal side has length 6 − 1 = 5, so the area is (4 × 5) ÷ 2 = 20 ÷ 2 = 10. A candidate who forgets to halve the product of the two sides gets 4 × 5 = 20. A candidate who forgets to subtract the shared vertex's coordinate and uses the raw coordinates 6 and 5 as the side lengths gets (6 × 5) ÷ 2 = 30 ÷ 2 = 15. A candidate who uses only one side length as the area gets 5.
- (d) the y-axis, and 12 — Method: coordinates are written (x, y), so the first number is the distance across and the second the distance up; a point whose first coordinate is 0 has not moved across from the origin and therefore lies on the vertical axis. Working: in (0, 12) the first number is 0, so P is on the y-axis, and the second number, 12, is the y-coordinate of P. Answer: the y-axis, and 12. The distractors: 'the x-axis, and 12' comes from mixing up which axis the condition 'the first coordinate is 0' describes; 'the y-axis, and 0' comes from placing P correctly but reading the pair the wrong way round, so that the first number is quoted as the y-coordinate; 'the x-axis, and 0' comes from making both of those mistakes at once.
- (a) (2, 7) — Midpoint = ((x1+x2)/2, (y1+y2)/2) = ((−3+7)/2, (5+9)/2) = (4/2, 14/2) = (2, 7). (4, 14) comes from adding the coordinates correctly but forgetting to divide by 2. (2, 9) comes from correctly averaging the x-coordinates but simply copying the y-coordinate of the second point instead of averaging the y-coordinates. (5, 2) comes from subtracting the coordinates instead of adding them before halving: ((7−(−3))/2, (9−5)/2) = (5, 2).
- (b) (−5, −2) — Both points have the same y-coordinate, so the midpoint lies on the same horizontal line: y = −2. The x-coordinate is the average of −9 and −1: (−9 + (−1)) ÷ 2 = −10 ÷ 2 = −5, giving (−5, −2). (−10, −2) comes from adding the x-coordinates but forgetting to divide by 2. (−4, −2) comes from a sign error on the second x-coordinate, treating −1 as +1: (−9 + 1) ÷ 2 = −4. (5, −2) comes from dropping the negative sign on the x-coordinate.
Build your own mix at the worksheet builder.