Printable · GCSE Foundation · ages 14-16
Coordinates in all four quadrants worksheet — GCSE Foundation
Fifteen questions on "coordinates in all four quadrants" — DfE statement A8. Print it, or print three versions so neighbours cannot copy by letter; the key gives the letter for each version.
Answer key: Coordinates in all four quadrants worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (b) x = 0 — Method: the first coordinate of a point measures how far to the left or right of the origin it is, so a point that is neither left nor right of the origin has a first coordinate of zero. Working: the y-axis is the vertical line through the origin; every point on it lies directly above or directly below the origin with no sideways movement at all, so its first coordinate is zero while its second coordinate may take any value. Answer: x = 0. The distractors: y = 0 is the condition for lying on the x-axis, the other axis; x = 1 comes from confusing the y-axis with the vertical line one unit to the right of it; x = y is the condition for the diagonal through the origin, which meets the y-axis at the origin only.
- (a) 5.8 — The horizontal distance is 3 and the vertical distance is 5, so using Pythagoras' theorem the distance is √(3² + 5²) = √34 = 5.8 (1 d.p.). A candidate who adds the two differences instead of using Pythagoras gets 3 + 5 = 8.0. A candidate who works out 3² + 5² = 34 but forgets to take the square root gets 34.0. A candidate who subtracts the squares instead of adding them gets √(5² − 3²) = √16 = 4.0.
- (d) (−1, 4) — In parallelogram ABCD the side DC is parallel and equal to the side AB, so D = C − AB. The vector from A to B is (2 − (−3), 1 − 1) = (5, 0), so D = (4 − 5, 4 − 0) = (−1, 4). A candidate who adds this vector to C instead of subtracting it gets (4 + 5, 4 + 0) = (9, 4). A candidate who subtracts A's coordinates from C's rather than the vector AB, and drops the minus sign on −3 while doing so, works out (4 − 3, 4 − 1) and gets (1, 3). A candidate who makes only the y-part of that slip, working out 4 − 1 instead of 4 − 0, gets (−1, 3).
- (c) the fourth quadrant — Method: read the sign of each coordinate in turn, then count round the regions, which are numbered anticlockwise from the one where both coordinates are positive. Working: the x-coordinate 5 is positive, so A is to the right of the y-axis; the y-coordinate −3 is negative, so A is below the x-axis; right of the y-axis and below the x-axis is the fourth of the four regions. Answer: the fourth quadrant. The distractors: 'the first quadrant' comes from ignoring the minus sign on the y-coordinate and treating the point as (5, 3); 'the second quadrant' comes from writing the pair the wrong way round and locating (−3, 5) instead; 'the third quadrant' comes from assuming that any point with a negative coordinate belongs to the region where the minus signs are, without checking the other coordinate.
- (a) (2, 7) — Midpoint = ((x1+x2)/2, (y1+y2)/2) = ((−3+7)/2, (5+9)/2) = (4/2, 14/2) = (2, 7). (4, 14) comes from adding the coordinates correctly but forgetting to divide by 2. (2, 9) comes from correctly averaging the x-coordinates but simply copying the y-coordinate of the second point instead of averaging the y-coordinates. (5, 2) comes from subtracting the coordinates instead of adding them before halving: ((7−(−3))/2, (9−5)/2) = (5, 2).
- (d) (4, 8) — The other endpoint is found from 2 × midpoint − known endpoint: x = 2 × (−1) − (−6) = −2 + 6 = 4, y = 2 × 5 − 2 = 10 − 2 = 8, giving (4, 8). (−3.5, 3.5) comes from averaging the given endpoint and the midpoint as if they were the two endpoints of a segment, instead of working backwards from the midpoint. (5, 3) comes from working out (−1 − (−6), 5 − 2) instead of doubling the midpoint before subtracting. (4, 5) comes from correctly finding the x-coordinate but copying the midpoint's y-coordinate of 5 instead of doubling it.
- (a) 9 km — Ravi's house and the library have the same y-coordinate, so the distance between them is the difference between their x-coordinates: 6 − (−3) = 9 km. 3 km comes from dropping the negative sign on Ravi's x-coordinate and working out 6 − 3 instead. 0 km comes from using the y-coordinates, which are equal, instead of the x-coordinates. −9 km comes from working out −3 − 6 = −9 and not converting it to a positive distance.
- (d) (4, 3) — The sides are parallel to the axes: the missing vertex must share the y-coordinate 3 with (−2, 3) and the x-coordinate 4 with (4, −3), giving (4, 3). (−4, 3) comes from a sign error on the x-coordinate. (4, −9) comes from continuing the pattern of the given points by subtracting 6 from the y-coordinate again instead of matching it to (−2, 3). (3, 4) comes from swapping the x- and y-coordinates.
- (a) the second quadrant — Method: the quadrant is settled by the signs of the two coordinates, not by their size; the quadrants are numbered anticlockwise, starting from the region where both coordinates are positive. Working: the x-coordinate −3 is negative, so the point lies to the left of the y-axis; the y-coordinate 0.5 is positive, so it lies above the x-axis; the region that is both left of the y-axis and above the x-axis is the second. Answer: the second quadrant. The distractors: 'the first quadrant' comes from ignoring the minus sign on −3; 'the third quadrant' comes from treating 0.5 as a negative value because it is smaller than 1, when in fact any number above zero is positive; 'the fourth quadrant' comes from reading the pair the wrong way round, as though the point were (0.5, −3).
- (d) 10 — The right angle is at (1, 1). The vertical side has length 5 − 1 = 4 and the horizontal side has length 6 − 1 = 5, so the area is (4 × 5) ÷ 2 = 20 ÷ 2 = 10. A candidate who forgets to halve the product of the two sides gets 4 × 5 = 20. A candidate who forgets to subtract the shared vertex's coordinate and uses the raw coordinates 6 and 5 as the side lengths gets (6 × 5) ÷ 2 = 30 ÷ 2 = 15. A candidate who uses only one side length as the area gets 5.
- (c) (2, 5) — Reflecting in the x-axis keeps the x-coordinate the same and changes the sign of the y-coordinate: Q = (2, 5). (−2, −5) comes from reflecting in the y-axis instead, which changes the sign of the x-coordinate. (−2, 5) comes from reflecting in both axes. (2, −5) comes from not applying the reflection at all.
- (a) (−6, −3) — Reflecting in the y-axis changes the sign of the x-coordinate and keeps the y-coordinate the same: (−6, −3). (6, 3) comes from reflecting in the x-axis instead, which changes the sign of the y-coordinate. (−6, 3) comes from reflecting in both axes. (6, −3) comes from not applying the reflection at all.
- (b) 3 — Distance from the y-axis is given by the size of the x-coordinate, which is 3. 8 comes from using the size of the y-coordinate instead of the x-coordinate. −8 comes from using the y-coordinate and keeping its negative sign, but a distance is never negative. 11 comes from adding the sizes of both coordinates, 3 + 8, instead of using the x-coordinate alone.
- (d) the y-axis, and 12 — Method: coordinates are written (x, y), so the first number is the distance across and the second the distance up; a point whose first coordinate is 0 has not moved across from the origin and therefore lies on the vertical axis. Working: in (0, 12) the first number is 0, so P is on the y-axis, and the second number, 12, is the y-coordinate of P. Answer: the y-axis, and 12. The distractors: 'the x-axis, and 12' comes from mixing up which axis the condition 'the first coordinate is 0' describes; 'the y-axis, and 0' comes from placing P correctly but reading the pair the wrong way round, so that the first number is quoted as the y-coordinate; 'the x-axis, and 0' comes from making both of those mistakes at once.
- (b) the first and the third — Method: the sign of a product depends only on the signs of the two numbers multiplied: like signs give a positive product and unlike signs a negative one, so look for the quadrants in which both coordinates carry the same sign. Working: in the first quadrant x and y are both positive, and positive times positive is positive; in the third quadrant both are negative, and negative times negative is positive as well; in the second quadrant x is negative while y is positive, and in the fourth x is positive while y is negative, so each of those gives a negative product. Answer: the first and the third. The distractors: 'the second and the fourth' comes from applying the rule for a NEGATIVE product, unlike signs, to a positive one; 'the first and the second' comes from testing only the y-coordinate and keeping the quadrants where the height is positive; 'the first and the fourth' comes from testing only the x-coordinate in the same way.
Build your own mix at the worksheet builder.