Printable · GCSE Foundation · ages 14-16
Coordinates in all four quadrants worksheet — GCSE Foundation
Fifteen questions on "coordinates in all four quadrants" — DfE statement A8. Print it, or print three versions so neighbours cannot copy by letter; the key gives the letter for each version.
Answer key: Coordinates in all four quadrants worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (d) (4, 8) — The other endpoint is found from 2 × midpoint − known endpoint: x = 2 × (−1) − (−6) = −2 + 6 = 4, y = 2 × 5 − 2 = 10 − 2 = 8, giving (4, 8). (−3.5, 3.5) comes from averaging the given endpoint and the midpoint as if they were the two endpoints of a segment, instead of working backwards from the midpoint. (5, 3) comes from working out (−1 − (−6), 5 − 2) instead of doubling the midpoint before subtracting. (4, 5) comes from correctly finding the x-coordinate but copying the midpoint's y-coordinate of 5 instead of doubling it.
- (a) the second quadrant — Method: the quadrant is settled by the signs of the two coordinates, not by their size; the quadrants are numbered anticlockwise, starting from the region where both coordinates are positive. Working: the x-coordinate −3 is negative, so the point lies to the left of the y-axis; the y-coordinate 0.5 is positive, so it lies above the x-axis; the region that is both left of the y-axis and above the x-axis is the second. Answer: the second quadrant. The distractors: 'the first quadrant' comes from ignoring the minus sign on −3; 'the third quadrant' comes from treating 0.5 as a negative value because it is smaller than 1, when in fact any number above zero is positive; 'the fourth quadrant' comes from reading the pair the wrong way round, as though the point were (0.5, −3).
- (d) (−1, 4) — In parallelogram ABCD the side DC is parallel and equal to the side AB, so D = C − AB. The vector from A to B is (2 − (−3), 1 − 1) = (5, 0), so D = (4 − 5, 4 − 0) = (−1, 4). A candidate who adds this vector to C instead of subtracting it gets (4 + 5, 4 + 0) = (9, 4). A candidate who subtracts A's coordinates from C's rather than the vector AB, and drops the minus sign on −3 while doing so, works out (4 − 3, 4 − 1) and gets (1, 3). A candidate who makes only the y-part of that slip, working out 4 − 1 instead of 4 − 0, gets (−1, 3).
- (c) (2, 5) — Reflecting in the x-axis keeps the x-coordinate the same and changes the sign of the y-coordinate: Q = (2, 5). (−2, −5) comes from reflecting in the y-axis instead, which changes the sign of the x-coordinate. (−2, 5) comes from reflecting in both axes. (2, −5) comes from not applying the reflection at all.
- (d) the y-axis, and 12 — Method: coordinates are written (x, y), so the first number is the distance across and the second the distance up; a point whose first coordinate is 0 has not moved across from the origin and therefore lies on the vertical axis. Working: in (0, 12) the first number is 0, so P is on the y-axis, and the second number, 12, is the y-coordinate of P. Answer: the y-axis, and 12. The distractors: 'the x-axis, and 12' comes from mixing up which axis the condition 'the first coordinate is 0' describes; 'the y-axis, and 0' comes from placing P correctly but reading the pair the wrong way round, so that the first number is quoted as the y-coordinate; 'the x-axis, and 0' comes from making both of those mistakes at once.
- (b) x = 0 — Method: the first coordinate of a point measures how far to the left or right of the origin it is, so a point that is neither left nor right of the origin has a first coordinate of zero. Working: the y-axis is the vertical line through the origin; every point on it lies directly above or directly below the origin with no sideways movement at all, so its first coordinate is zero while its second coordinate may take any value. Answer: x = 0. The distractors: y = 0 is the condition for lying on the x-axis, the other axis; x = 1 comes from confusing the y-axis with the vertical line one unit to the right of it; x = y is the condition for the diagonal through the origin, which meets the y-axis at the origin only.
- (d) the third quadrant — Method: only the signs of the coordinates matter, so two coordinates equal in size still have to be read separately, one for each axis. Working: both coordinates of (−2, −2) are negative, so B lies to the left of the y-axis and below the x-axis; counting anticlockwise from the region where both coordinates are positive, left and below is the third region. Answer: the third quadrant. The distractors: 'the first quadrant' comes from ignoring both minus signs and treating the point as (2, 2); 'the second quadrant' comes from applying the minus sign to the x-coordinate only, as though the point were (−2, 2); 'the fourth quadrant' comes from applying it to the y-coordinate only, as though the point were (2, −2).
- (a) y = 0 — Method: in the pair (x, y) the first coordinate measures how far left or right of the origin a point is and the second how far above or below the x-axis it is, so a point on an axis has one of those measurements equal to zero. Working: the x-axis is the horizontal line through the origin, so a point sitting on it is neither above nor below that line and its second coordinate is zero, while its first coordinate may be positive, negative or zero. Answer: y = 0. The distractors: x = 0 is the condition for lying on the y-axis, the other axis; x > 0 comes from assuming a point on the x-axis must be to the right of the origin, which is true only of part of that axis; x = y holds only at the origin, which is one point of the x-axis rather than a property shared by all of them.
- (b) the first and the third — Method: the sign of a product depends only on the signs of the two numbers multiplied: like signs give a positive product and unlike signs a negative one, so look for the quadrants in which both coordinates carry the same sign. Working: in the first quadrant x and y are both positive, and positive times positive is positive; in the third quadrant both are negative, and negative times negative is positive as well; in the second quadrant x is negative while y is positive, and in the fourth x is positive while y is negative, so each of those gives a negative product. Answer: the first and the third. The distractors: 'the second and the fourth' comes from applying the rule for a NEGATIVE product, unlike signs, to a positive one; 'the first and the second' comes from testing only the y-coordinate and keeping the quadrants where the height is positive; 'the first and the fourth' comes from testing only the x-coordinate in the same way.
- (b) (−5, −2) — A rotation of 180° about the origin reverses the sign of both coordinates, so Q = (−5, −2). A candidate who reverses the sign of only the y-coordinate, as if reflecting in the x-axis, gets (5, −2). A candidate who reverses the sign of only the x-coordinate, as if reflecting in the y-axis, gets (−5, 2). A candidate who swaps the coordinates instead of reversing their signs gets (2, 5).
- (d) (3, 5) — Method: the quadrant a point lies in is decided by the signs of its two coordinates, and in the first quadrant both coordinates are positive. Working: (−2, 3) has a negative x-coordinate, so it sits to the left of the y-axis; (4, −1) has a negative y-coordinate, so it sits below the x-axis; (−1, −4) has both coordinates negative; only (3, 5) has a positive x-coordinate and a positive y-coordinate. Answer: (3, 5). The distractors: (−2, 3) is chosen by candidates who check only the y-coordinate and take a positive height as enough; (4, −1) is chosen by those who check only the x-coordinate; (−1, −4) is chosen by those who number the quadrants from the bottom left, so that the region with two negative coordinates is called the first.
- (b) (−4, 3) — Method: in a rectangle whose sides are parallel to the axes only two different x-coordinates and two different y-coordinates appear, and each of them is shared by a pair of vertices, so the missing vertex takes the x-coordinate and the y-coordinate that so far appear only once. Working: the x-coordinates given are −4, 2 and 2, so 2 is already used twice and −4 is used once; the y-coordinates given are −1, −1 and 3, so −1 is already used twice and 3 is used once; the fourth vertex therefore has x = −4 and y = 3. Answer: (−4, 3). The distractors: (3, −4) comes from picking the two unpaired coordinates correctly and then writing them in the wrong order; (−4, −5) comes from matching the 4-unit vertical side but measuring it downwards from (−4, −1) instead of upwards; (8, 3) comes from carrying on round the shape with the horizontal step used earlier, adding 6 to the x-coordinate of (2, 3) instead of closing the rectangle.
- (a) (−6, −3) — Reflecting in the y-axis changes the sign of the x-coordinate and keeps the y-coordinate the same: (−6, −3). (6, 3) comes from reflecting in the x-axis instead, which changes the sign of the y-coordinate. (−6, 3) comes from reflecting in both axes. (6, −3) comes from not applying the reflection at all.
- (a) 5.8 — The horizontal distance is 3 and the vertical distance is 5, so using Pythagoras' theorem the distance is √(3² + 5²) = √34 = 5.8 (1 d.p.). A candidate who adds the two differences instead of using Pythagoras gets 3 + 5 = 8.0. A candidate who works out 3² + 5² = 34 but forgets to take the square root gets 34.0. A candidate who subtracts the squares instead of adding them gets √(5² − 3²) = √16 = 4.0.
- (b) (−1, 6) — '6 units above the x-axis' gives a y-coordinate of 6, and the x-coordinate is given as −1, so F = (−1, 6). (6, −1) comes from swapping the x- and y-coordinates. (−1, −6) comes from treating 'above' as a negative direction instead of positive. (1, 6) comes from dropping the negative sign on the given x-coordinate.
Build your own mix at the worksheet builder.