Printable · GCSE Foundation · ages 14-16
Coordinates in all four quadrants worksheet — GCSE Foundation
Fifteen questions on "coordinates in all four quadrants" — DfE statement A8. Print it, or print three versions so neighbours cannot copy by letter; the key gives the letter for each version.
Answer key: Coordinates in all four quadrants worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (c) (−4, 7) — Left of the origin means negative x, and up means positive y, so the point is (−4, 7). (4, 7) comes from forgetting that 'left' means the x-coordinate is negative. (−4, −7) comes from treating 'up' as a negative direction instead of positive. (7, −4) comes from swapping the x- and y-coordinates.
- (a) the second quadrant — Method: the quadrant is settled by the signs of the two coordinates, not by their size; the quadrants are numbered anticlockwise, starting from the region where both coordinates are positive. Working: the x-coordinate −3 is negative, so the point lies to the left of the y-axis; the y-coordinate 0.5 is positive, so it lies above the x-axis; the region that is both left of the y-axis and above the x-axis is the second. Answer: the second quadrant. The distractors: 'the first quadrant' comes from ignoring the minus sign on −3; 'the third quadrant' comes from treating 0.5 as a negative value because it is smaller than 1, when in fact any number above zero is positive; 'the fourth quadrant' comes from reading the pair the wrong way round, as though the point were (0.5, −3).
- (d) (−1, 4) — In parallelogram ABCD the side DC is parallel and equal to the side AB, so D = C − AB. The vector from A to B is (2 − (−3), 1 − 1) = (5, 0), so D = (4 − 5, 4 − 0) = (−1, 4). A candidate who adds this vector to C instead of subtracting it gets (4 + 5, 4 + 0) = (9, 4). A candidate who subtracts A's coordinates from C's rather than the vector AB, and drops the minus sign on −3 while doing so, works out (4 − 3, 4 − 1) and gets (1, 3). A candidate who makes only the y-part of that slip, working out 4 − 1 instead of 4 − 0, gets (−1, 3).
- (d) 10 — The right angle is at (1, 1). The vertical side has length 5 − 1 = 4 and the horizontal side has length 6 − 1 = 5, so the area is (4 × 5) ÷ 2 = 20 ÷ 2 = 10. A candidate who forgets to halve the product of the two sides gets 4 × 5 = 20. A candidate who forgets to subtract the shared vertex's coordinate and uses the raw coordinates 6 and 5 as the side lengths gets (6 × 5) ÷ 2 = 30 ÷ 2 = 15. A candidate who uses only one side length as the area gets 5.
- (d) (4, 3) — The sides are parallel to the axes: the missing vertex must share the y-coordinate 3 with (−2, 3) and the x-coordinate 4 with (4, −3), giving (4, 3). (−4, 3) comes from a sign error on the x-coordinate. (4, −9) comes from continuing the pattern of the given points by subtracting 6 from the y-coordinate again instead of matching it to (−2, 3). (3, 4) comes from swapping the x- and y-coordinates.
- (b) 3 — −6 + 9 = 3. A candidate who ignores the negative sign on the x-coordinate and adds the two positive values gets 6 + 9 = 15. A candidate who treats the y-coordinate as negative too gets −6 + (−9) = −15. A candidate who works out 9 − 6 correctly as 3 but then writes the answer with the wrong sign gets −3.
- (a) (6, 0) — Method: a pair of coordinates records movement from the origin, the across movement written first and the up or down movement second. Working: C is 6 units to the right of the origin, so the across number is 6; it is 0 units up, so the up number is 0; written in order that gives (6, 0), a point on the x-axis. Answer: (6, 0). The distractors: (0, 6) comes from writing the two movements the wrong way round; (0, 0) comes from reading '0 units up' as meaning the point never left the origin at all, which ignores the movement across; (7, 0) comes from counting the origin itself as the first unit while counting 6 units to the right.
- (b) 3 — Distance from the y-axis is given by the size of the x-coordinate, which is 3. 8 comes from using the size of the y-coordinate instead of the x-coordinate. −8 comes from using the y-coordinate and keeping its negative sign, but a distance is never negative. 11 comes from adding the sizes of both coordinates, 3 + 8, instead of using the x-coordinate alone.
- (c) Second and fourth — If x + y = 0 then y = −x, so x and y always have opposite signs, one positive and one negative. A point with a negative x and a positive y lies in the second quadrant, and a point with a positive x and a negative y lies in the fourth quadrant, so the point lies in the second or the fourth. A candidate who reads x + y = 0 as meaning x and y have the same sign picks First and third, which is where x × y is positive, not where x + y = 0. A candidate who decides that y must be the positive coordinate picks the two quadrants above the x-axis, First and second. A candidate who decides that y must be the negative coordinate picks the two quadrants below the x-axis, Third and fourth.
- (a) 9 km — Ravi's house and the library have the same y-coordinate, so the distance between them is the difference between their x-coordinates: 6 − (−3) = 9 km. 3 km comes from dropping the negative sign on Ravi's x-coordinate and working out 6 − 3 instead. 0 km comes from using the y-coordinates, which are equal, instead of the x-coordinates. −9 km comes from working out −3 − 6 = −9 and not converting it to a positive distance.
- (b) the first and the third — Method: the sign of a product depends only on the signs of the two numbers multiplied: like signs give a positive product and unlike signs a negative one, so look for the quadrants in which both coordinates carry the same sign. Working: in the first quadrant x and y are both positive, and positive times positive is positive; in the third quadrant both are negative, and negative times negative is positive as well; in the second quadrant x is negative while y is positive, and in the fourth x is positive while y is negative, so each of those gives a negative product. Answer: the first and the third. The distractors: 'the second and the fourth' comes from applying the rule for a NEGATIVE product, unlike signs, to a positive one; 'the first and the second' comes from testing only the y-coordinate and keeping the quadrants where the height is positive; 'the first and the fourth' comes from testing only the x-coordinate in the same way.
- (c) the fourth quadrant — Method: read the sign of each coordinate in turn, then count round the regions, which are numbered anticlockwise from the one where both coordinates are positive. Working: the x-coordinate 5 is positive, so A is to the right of the y-axis; the y-coordinate −3 is negative, so A is below the x-axis; right of the y-axis and below the x-axis is the fourth of the four regions. Answer: the fourth quadrant. The distractors: 'the first quadrant' comes from ignoring the minus sign on the y-coordinate and treating the point as (5, 3); 'the second quadrant' comes from writing the pair the wrong way round and locating (−3, 5) instead; 'the third quadrant' comes from assuming that any point with a negative coordinate belongs to the region where the minus signs are, without checking the other coordinate.
- (b) (0, −2) — Method: a translation acts on the two coordinates separately: moving right or left changes the x-coordinate only, moving up or down changes the y-coordinate only, and right and up add while left and down subtract. Working: the point starts at (−4, 7); moving 4 units to the right gives an x-coordinate of −4 + 4 = 0; moving 9 units down gives a y-coordinate of 7 − 9 = −2. Answer: (0, −2). The distractors: (5, 3) comes from pairing each number with the wrong coordinate, adding 9 to −4 and taking 4 from 7; (0, 16) comes from treating 'down' as an addition, giving 7 + 9 = 16 for the second coordinate; (−8, −2) comes from treating 'to the right' as a subtraction, giving −4 − 4 = −8 for the first coordinate.
- (c) (2, 5) — Reflecting in the x-axis keeps the x-coordinate the same and changes the sign of the y-coordinate: Q = (2, 5). (−2, −5) comes from reflecting in the y-axis instead, which changes the sign of the x-coordinate. (−2, 5) comes from reflecting in both axes. (2, −5) comes from not applying the reflection at all.
- (d) (3, 5) — Method: the quadrant a point lies in is decided by the signs of its two coordinates, and in the first quadrant both coordinates are positive. Working: (−2, 3) has a negative x-coordinate, so it sits to the left of the y-axis; (4, −1) has a negative y-coordinate, so it sits below the x-axis; (−1, −4) has both coordinates negative; only (3, 5) has a positive x-coordinate and a positive y-coordinate. Answer: (3, 5). The distractors: (−2, 3) is chosen by candidates who check only the y-coordinate and take a positive height as enough; (4, −1) is chosen by those who check only the x-coordinate; (−1, −4) is chosen by those who number the quadrants from the bottom left, so that the region with two negative coordinates is called the first.
Build your own mix at the worksheet builder.