Printable · GCSE Foundation · ages 14-16
Generating sequences worksheet — GCSE Foundation
Fifteen questions on "generating sequences" — DfE statement A23. Print it, or print three versions so neighbours cannot copy by letter; the key gives the letter for each version.
Non-calculator
Generating sequences worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.A geometric sequence starts at 4, and each term after that is found by multiplying the term before it by 3. Write down the first four terms of the sequence.
- 2.The nth term of a sequence is 4n − 3. Work out the 7th term of the sequence.
- 3.A sequence has the position-to-term rule: the term is the square of the position number. Its first four terms are 1, 4, 9, 16. Work out the 10th term.
- 4.Matchsticks are laid out as a row of squares, with each new square sharing a side with the square before it. The first square uses 4 matchsticks and every extra square uses 3 more. Work out how many matchsticks a row of 4 squares uses.
- 5.A sequence begins at 7. Each term after the first is found by adding 6 to the term before it. Work out the 6th term of the sequence.
- 6.A plant is 4 cm tall in week 1. Each week after that, its height increases by 5 cm. Work out the first week in which the plant is taller than 30 cm.
- 7.A sequence begins at 60, and each term after that is found by subtracting 7 from the term before it. Work out the 5th term of the sequence.
- 8.Here are the first four terms of an arithmetic sequence: 5, 9, 13, 17. Work out the 5th term.
- 9.A sequence has the position-to-term rule: the nth term is 3n. Write down the first four terms of the sequence.
- 10.The nth term of a sequence is 3n + 2. Work out the 4th term of the sequence.
- 11.A sequence has the position-to-term rule: the term is the position number multiplied by itself. Its first five terms are 1, 4, 9, 16, 25. Work out the 8th term.
- 12.Which of these rules generates the sequence 6, 11, 16, 21, …?
- 13.In a sequence, each term is half the term before it. The sequence begins 100, 50, 25. Write down the next term.
- 14.A sequence has the position-to-term rule 5n − 2, where n is the position number. Which of these is a term in the sequence?
- 15.A sequence begins at 50, and each term after that is found by subtracting 8 from the term before it. Priya says the 8th term of the sequence is negative. Is Priya correct?
Answer key
- (b) 4, 12, 36, 108 — Method: multiply the previous term by 3 each time, starting from the first term. Working: 4 × 3 = 12, 12 × 3 = 36, 36 × 3 = 108. Answer: 4, 12, 36, 108. 4, 7, 10, 13 comes from adding 3 each time instead of multiplying by 3, confusing this with an arithmetic sequence. 4, 12, 15, 18 comes from multiplying correctly to get the second term, then switching to adding 3 for the rest. 12, 36, 108, 324 comes from listing the terms after the first term, missing off the starting value of 4.
- (b) 25 — Substitute n = 7: 4 × 7 − 3 = 28 − 3 = 25. Forgetting to subtract 3 gives 4 × 7 = 28. Subtracting 3 from 7 before multiplying by 4, 4 × (7 − 3) = 16, applies the operations in the wrong order. Substituting n = 8 by miscounting the position gives 4 × 8 − 3 = 29.
- (c) 100 — Method: apply the position-to-term rule straight to the position asked for, since it does not depend on the term before it. Working: the rule squares the position number and the position is 10, so the term is 10², which means 10 × 10. Answer: 100. The distractors: 81 comes from squaring 9 instead of 10, one position short; 20 comes from multiplying the position by 2 instead of squaring it; 1000 comes from cubing the position, 10 × 10 × 10, instead of squaring it.
- (d) 13 — Method: the numbers of matchsticks form a sequence with a term-to-term rule, so count the first square in full and then add the repeated amount once for every extra square. Working: one square uses 4 matchsticks; a row of 4 squares has 3 extra squares after the first, and each of those adds 3 matchsticks, giving 3 × 3 = 9 to add on to the 4. Answer: 13. The distractors: 16 comes from counting each square as a separate set of 4 matchsticks, 4 × 4, and ignoring the shared sides; 12 comes from using 3 matchsticks for all four squares, 3 × 4, and forgetting that the first square needs a fourth side; 10 comes from adding the 3 only twice, as though a row of four squares had two extra squares rather than three.
- (b) 37 — The terms are 7, 13, 19, 25, 31, 37 — each found by adding 6 to the term before, so the 6th term is 37. Adding 6 six times to the first term instead of five times, 7 + 6 × 6 = 43, treats the first term as if it were before the sequence starts. Stopping one term early gives the 5th term, 31. Stopping two terms early gives the 4th term, 25.
- (b) Week 7 — The height after n weeks is 4 + 5(n − 1) = 5n − 1. The plant is taller than 30 cm when its height, 5n − 1, is more than 30, written 5n − 1 > 30; add 1 to both sides (5n > 31) and divide by 5, which gives n > 6.2, so the first whole week is week 7, where the height is 5 × 7 − 1 = 34 cm. Rounding 6.2 down to week 6 without checking gives a height of only 5 × 6 − 1 = 29 cm, which is not yet taller than 30 cm. Counting one week too many gives week 8. Working out 30 ÷ 5 = 6 and then subtracting 1 from the week number instead of from the height gives week 5.
- (c) 32 — The terms are 60, 53, 46, 39, 32 — each found by subtracting 7 from the term before, so the 5th term is 32. Subtracting 7 five times from the first term instead of four times, 60 − 7 × 5 = 25, treats the first term as if it came before the sequence starts. Adding 7 four times instead of subtracting, 60 + 7 × 4 = 88, uses the wrong operation. Stopping one term early gives the 4th term, 39.
- (b) 21 — Method: find the gap between neighbouring terms, then add one gap to the last term that is known. Working: 9 − 5 = 4, 13 − 9 = 4 and 17 − 13 = 4, so 4 is added each time; the 5th term is one step on from the 4th term, so it is 17 + 4. Answer: 21. The distractors: 25 comes from adding the 4 twice and landing on the 6th term; 20 comes from multiplying the position by the common difference, 5 × 4, and ignoring the fact that the sequence starts at 5 rather than at 4; 22 comes from adding the first term, 5, to 17 instead of adding the common difference.
- (b) 3, 6, 9, 12 — Method: substitute the positions n = 1, 2, 3 and 4 into the rule in turn, because a position-to-term rule gives each term from its own position number. Working: 3 × 1 = 3, 3 × 2 = 6, 3 × 3 = 9 and 3 × 4 = 12. Answer: 3, 6, 9, 12. The distractors: 3, 9, 27, 81 comes from reading 3n as 3 multiplied by itself n times and so multiplying by 3 at every step; 0, 3, 6, 9 comes from starting the count at n = 0, which shifts every term one place; 4, 5, 6, 7 comes from reading 3n as n + 3 and adding 3 to each position number instead of multiplying by 3.
- (b) 14 — Substitute n=4 into 3n+2: 3×4+2=14. A candidate who adds 3 and n instead of multiplying would compute 3+4+2=9. A candidate who substitutes the wrong term number, n=3, would reach 3×3+2=11. A candidate who forgets to add the constant term would compute just 3×4=12.
- (b) 64 — Method: a position-to-term rule is applied straight to the position number, so a term far along the sequence can be found without writing out the terms in between. Working: the rule multiplies the position by itself and the position asked for is 8, so the term is 8 × 8. Answer: 64. The distractors: 16 comes from multiplying the position by 2 instead of by itself; 81 comes from working out 9 × 9, one position too far along; 8 comes from writing down the position number itself as the term.
- (c) 5n + 1 — Method: find the common difference, then use it as the coefficient of n in the position-to-term rule, and find the constant by checking against the first term. Working: the common difference is 5, so the rule has the form 5n + c. Using the 1st term: 5(1) + c = 6, so c = 1. The rule is 5n + 1. Answer: 5n + 1. 5n − 1 uses the correct coefficient but the wrong sign for the constant. 6n comes from using the first term as the coefficient of n instead of the common difference — it matches the 1st term by coincidence but fails from the 2nd term onward. n + 5 swaps the coefficient and the constant around, using the common difference as the constant instead of the coefficient of n.
- (b) 12.5 — Method: apply the term-to-term rule to the term just written, and keep the exact value even when halving does not give a whole number. Working: the term before the one wanted is 25, and halving it means working out 25 ÷ 2, which is 12 with 1 left over to share, giving a half. Answer: 12.5. The distractors: 12 comes from halving 25 and then cutting the result down to a whole number; 0 comes from treating the sequence as one with a constant difference and taking 25 away from 25; 6.25 comes from halving twice and giving the term after the next one.
- (c) 28 — Method: substitute values of n into 5n − 2 and check which of the options matches. Working: for n = 6, 5 × 6 − 2 = 30 − 2 = 28, so 28 is a term of the sequence, the 6th term. Answer: 28. 27 comes from using the rule 5n − 3 instead of 5n − 2. 30 comes from using 5n on its own, forgetting to subtract 2 at all. 20 comes from applying the subtraction before the multiplication, working out 5 × (n − 2) instead of 5n − 2.
- (d) Yes: the 8th term is 50 − 8 × 7 = −6, which is negative. — Method: find the 8th term by subtracting 8 a total of 7 times from the first term, since the 1st term itself needs 0 subtractions. Working: 8th term = 50 − 8 × 7 = 50 − 56 = −6, which is negative, so Priya is correct. Answer: Yes, the 8th term is 50 − 8 × 7 = −6, which is negative. The "50 − 8 × 6 = 2" option subtracts 8 only six times instead of seven, an off-by-one error in counting the steps. The "50 − 8 × 8 = −14" option subtracts 8 eight times instead of seven, the opposite off-by-one error. The claim that repeated subtraction "can never go negative" ignores that subtracting enough times from any starting value eventually gives a negative result.
Build your own mix at the worksheet builder.