Printable · GCSE Foundation · ages 14-16
Generating sequences worksheet — GCSE Foundation
Fifteen questions on "generating sequences" — DfE statement A23. Print it, or print three versions so neighbours cannot copy by letter; the key gives the letter for each version.
Generating sequences worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.A sequence has the position-to-term rule: the term is the position number multiplied by itself. Its first five terms are 1, 4, 9, 16, 25. Work out the 8th term.
- 2.The nth term of a sequence is 4n − 3. Work out the 7th term of the sequence.
- 3.The nth term of a sequence is 2n² + 1. Work out the 4th term of the sequence.
- 4.A plant is 4 cm tall in week 1. Each week after that, its height increases by 5 cm. Work out the first week in which the plant is taller than 30 cm.
- 5.A geometric sequence starts at 4, and each term after that is found by multiplying the term before it by 3. Write down the first four terms of the sequence.
- 6.A geometric sequence starts at 3, and each term after that is found by multiplying the term before it by 2. Write down the first four terms.
- 7.The nth term of a sequence is 3n + 2. Work out the 4th term of the sequence.
- 8.Here are the first five terms of an arithmetic sequence: 2, 5, 8, 11, 14. Work out the 8th term.
- 9.In a sequence, each term is half the term before it. The sequence begins 100, 50, 25. Write down the next term.
- 10.A sequence has the position-to-term rule 5n − 2, where n is the position number. Which of these is a term in the sequence?
- 11.The nth term of a sequence is n² + 3. Work out the first term of the sequence that is greater than 50.
- 12.The nth term of a sequence is 2n − 1. Work out the 6th term of the sequence.
- 13.A wall is tiled in rows, and every row uses the same number of tiles. One row uses 10 tiles, two rows use 20 tiles and three rows use 30 tiles. Work out how many tiles are needed for 7 rows.
- 14.A sequence begins at 7. Each term after the first is found by adding 6 to the term before it. Work out the 6th term of the sequence.
- 15.A sequence begins at 50, and each term after that is found by subtracting 8 from the term before it. Priya says the 8th term of the sequence is negative. Is Priya correct?
Answer key
- (b) 64 — Method: a position-to-term rule is applied straight to the position number, so a term far along the sequence can be found without writing out the terms in between. Working: the rule multiplies the position by itself and the position asked for is 8, so the term is 8 × 8. Answer: 64. The distractors: 16 comes from multiplying the position by 2 instead of by itself; 81 comes from working out 9 × 9, one position too far along; 8 comes from writing down the position number itself as the term.
- (b) 25 — Substitute n = 7: 4 × 7 − 3 = 28 − 3 = 25. Forgetting to subtract 3 gives 4 × 7 = 28. Subtracting 3 from 7 before multiplying by 4, 4 × (7 − 3) = 16, applies the operations in the wrong order. Substituting n = 8 by miscounting the position gives 4 × 8 − 3 = 29.
- (a) 33 — Substitute n=4 into 2n²+1: 2×4²+1=2×16+1=33. A candidate who computes n² as 2×n instead of n×n would compute 2×(2×4)+1=2×8+1=17. A candidate who correctly finds 2×16 but forgets to add the constant 1 would stop at 32. A candidate who squares the whole term 2n, rather than squaring n before multiplying by 2, would compute (2×4)²+1=64+1=65.
- (b) Week 7 — The height after n weeks is 4 + 5(n − 1) = 5n − 1. The plant is taller than 30 cm when its height, 5n − 1, is more than 30, written 5n − 1 > 30; add 1 to both sides (5n > 31) and divide by 5, which gives n > 6.2, so the first whole week is week 7, where the height is 5 × 7 − 1 = 34 cm. Rounding 6.2 down to week 6 without checking gives a height of only 5 × 6 − 1 = 29 cm, which is not yet taller than 30 cm. Counting one week too many gives week 8. Working out 30 ÷ 5 = 6 and then subtracting 1 from the week number instead of from the height gives week 5.
- (b) 4, 12, 36, 108 — Method: multiply the previous term by 3 each time, starting from the first term. Working: 4 × 3 = 12, 12 × 3 = 36, 36 × 3 = 108. Answer: 4, 12, 36, 108. 4, 7, 10, 13 comes from adding 3 each time instead of multiplying by 3, confusing this with an arithmetic sequence. 4, 12, 15, 18 comes from multiplying correctly to get the second term, then switching to adding 3 for the rest. 12, 36, 108, 324 comes from listing the terms after the first term, missing off the starting value of 4.
- (d) 3, 6, 12, 24 — Method: a term-to-term rule is applied to the term just written, so start with the first term and use the rule three more times. Working: the first term is 3; 3 × 2 = 6 is the second; 6 × 2 = 12 is the third; 12 × 2 = 24 is the fourth. Answer: 3, 6, 12, 24. The distractors: 3, 5, 7, 9 comes from adding 2 each time instead of multiplying by 2; 3, 9, 27, 81 comes from multiplying by the first term, 3, instead of by the multiplier 2 the rule gives; 6, 12, 24, 48 comes from doubling before writing anything down, so the list starts one term too late and the given first term is missing.
- (b) 14 — Substitute n=4 into 3n+2: 3×4+2=14. A candidate who adds 3 and n instead of multiplying would compute 3+4+2=9. A candidate who substitutes the wrong term number, n=3, would reach 3×3+2=11. A candidate who forgets to add the constant term would compute just 3×4=12.
- (d) 23 — Method: find the number added each time, then add it to the first term once for every step between the first term and the term wanted. Working: 5 − 2 = 3, 8 − 5 = 3 and so on, so 3 is added each time; the 8th term is seven steps on from the 1st term, so it is 2 + 7 × 3 = 2 + 21. Answer: 23, which agrees with counting on from the 5th term: 14, 17, 20 and then one step more. The distractors: 26 comes from adding the common difference eight times instead of seven, 2 + 8 × 3; 20 comes from stopping one term early, at the 7th term; 24 comes from multiplying the position by the common difference, 8 × 3, and ignoring the fact that the sequence starts at 2 rather than at 3.
- (b) 12.5 — Method: apply the term-to-term rule to the term just written, and keep the exact value even when halving does not give a whole number. Working: the term before the one wanted is 25, and halving it means working out 25 ÷ 2, which is 12 with 1 left over to share, giving a half. Answer: 12.5. The distractors: 12 comes from halving 25 and then cutting the result down to a whole number; 0 comes from treating the sequence as one with a constant difference and taking 25 away from 25; 6.25 comes from halving twice and giving the term after the next one.
- (c) 28 — Method: substitute values of n into 5n − 2 and check which of the options matches. Working: for n = 6, 5 × 6 − 2 = 30 − 2 = 28, so 28 is a term of the sequence, the 6th term. Answer: 28. 27 comes from using the rule 5n − 3 instead of 5n − 2. 30 comes from using 5n on its own, forgetting to subtract 2 at all. 20 comes from applying the subtraction before the multiplication, working out 5 × (n − 2) instead of 5n − 2.
- (a) 52 — Test successive terms: n=6 gives 6²+3=39, which is not greater than 50. n=7 gives 7²+3=52, which is greater than 50, so the first term greater than 50 is 52. A candidate who stops at n=6, before checking whether 39 actually exceeds 50, would give 39. A candidate who solves n²>50 instead of n²+3>50, ignoring the +3 in the search, would find n=8 is the first value with n²>50 (since 7²=49) and compute 8²+3=67. A candidate who computes n² by doubling n instead of squaring it would compute 2×7+3=17.
- (a) 11 — Substitute n=6 into 2n−1: 2×6−1=11. A candidate who adds 2 and 6 and then subtracts 1, instead of multiplying 2 by 6 first, would compute 2+6−1=7. A candidate who substitutes the wrong term number, n=5, would reach 2×5−1=9. A candidate who forgets to subtract 1 would compute just 2×6=12.
- (c) 70 — Method: the numbers of tiles form a sequence in which the same amount is added for each extra row, so the total for a number of rows is that amount multiplied by the number of rows. Working: 20 − 10 = 10 and 30 − 20 = 10, so each row adds 10 tiles; 7 rows therefore need 7 lots of 10, that is 7 × 10. Answer: 70. The distractors: 80 comes from counting one row too many and giving the total for 8 rows; 17 comes from adding the 10 tiles to the 7 rows instead of multiplying; 10 comes from giving the number of tiles in a single row rather than the total for all the rows.
- (b) 37 — The terms are 7, 13, 19, 25, 31, 37 — each found by adding 6 to the term before, so the 6th term is 37. Adding 6 six times to the first term instead of five times, 7 + 6 × 6 = 43, treats the first term as if it were before the sequence starts. Stopping one term early gives the 5th term, 31. Stopping two terms early gives the 4th term, 25.
- (d) Yes: the 8th term is 50 − 8 × 7 = −6, which is negative. — Method: find the 8th term by subtracting 8 a total of 7 times from the first term, since the 1st term itself needs 0 subtractions. Working: 8th term = 50 − 8 × 7 = 50 − 56 = −6, which is negative, so Priya is correct. Answer: Yes, the 8th term is 50 − 8 × 7 = −6, which is negative. The "50 − 8 × 6 = 2" option subtracts 8 only six times instead of seven, an off-by-one error in counting the steps. The "50 − 8 × 8 = −14" option subtracts 8 eight times instead of seven, the opposite off-by-one error. The claim that repeated subtraction "can never go negative" ignores that subtracting enough times from any starting value eventually gives a negative result.
Build your own mix at the worksheet builder.