Printable · GCSE Foundation · ages 14-16
Generating sequences worksheet — GCSE Foundation
Fifteen questions on "generating sequences" — DfE statement A23. Print it, or print three versions so neighbours cannot copy by letter; the key gives the letter for each version.
Generating sequences worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.A sequence has the position-to-term rule: the nth term is 3n. Write down the first four terms of the sequence.
- 2.In a sequence, each term is half the term before it. The sequence begins 100, 50, 25. Write down the next term.
- 3.The nth term of a sequence is 2n − 1. Work out the 6th term of the sequence.
- 4.The nth term of a sequence is 3n + 2. Work out the 4th term of the sequence.
- 5.The nth term of a sequence is 4n − 3. Work out the 7th term of the sequence.
- 6.A sequence has the position-to-term rule: the term is the square of the position number. Its first four terms are 1, 4, 9, 16. Work out the 10th term.
- 7.Here are the first five terms of an arithmetic sequence: 2, 5, 8, 11, 14. Work out the 8th term.
- 8.A geometric sequence has first term 5, and each term after that is 3 times the term before it. Work out the first term of the sequence that is greater than 1000.
- 9.A sequence begins at 7. Each term after the first is found by adding 6 to the term before it. Work out the 6th term of the sequence.
- 10.A sequence has the position-to-term rule n² + 2, where n is the position number. Work out the 6th term.
- 11.A sequence has the position-to-term rule 5n − 2, where n is the position number. Which of these is a term in the sequence?
- 12.A sequence begins at 50, and each term after that is found by subtracting 8 from the term before it. Priya says the 8th term of the sequence is negative. Is Priya correct?
- 13.Which of these rules generates the sequence 6, 11, 16, 21, …?
- 14.A sequence has the position-to-term rule n² + 1, where n is the position number. Work out how much bigger the 5th term is than the 4th term.
- 15.A sequence has the position-to-term rule: the term is the position number multiplied by itself. Its first five terms are 1, 4, 9, 16, 25. Work out the 8th term.
Answer key
- (b) 3, 6, 9, 12 — Method: substitute the positions n = 1, 2, 3 and 4 into the rule in turn, because a position-to-term rule gives each term from its own position number. Working: 3 × 1 = 3, 3 × 2 = 6, 3 × 3 = 9 and 3 × 4 = 12. Answer: 3, 6, 9, 12. The distractors: 3, 9, 27, 81 comes from reading 3n as 3 multiplied by itself n times and so multiplying by 3 at every step; 0, 3, 6, 9 comes from starting the count at n = 0, which shifts every term one place; 4, 5, 6, 7 comes from reading 3n as n + 3 and adding 3 to each position number instead of multiplying by 3.
- (b) 12.5 — Method: apply the term-to-term rule to the term just written, and keep the exact value even when halving does not give a whole number. Working: the term before the one wanted is 25, and halving it means working out 25 ÷ 2, which is 12 with 1 left over to share, giving a half. Answer: 12.5. The distractors: 12 comes from halving 25 and then cutting the result down to a whole number; 0 comes from treating the sequence as one with a constant difference and taking 25 away from 25; 6.25 comes from halving twice and giving the term after the next one.
- (a) 11 — Substitute n=6 into 2n−1: 2×6−1=11. A candidate who adds 2 and 6 and then subtracts 1, instead of multiplying 2 by 6 first, would compute 2+6−1=7. A candidate who substitutes the wrong term number, n=5, would reach 2×5−1=9. A candidate who forgets to subtract 1 would compute just 2×6=12.
- (b) 14 — Substitute n=4 into 3n+2: 3×4+2=14. A candidate who adds 3 and n instead of multiplying would compute 3+4+2=9. A candidate who substitutes the wrong term number, n=3, would reach 3×3+2=11. A candidate who forgets to add the constant term would compute just 3×4=12.
- (b) 25 — Substitute n = 7: 4 × 7 − 3 = 28 − 3 = 25. Forgetting to subtract 3 gives 4 × 7 = 28. Subtracting 3 from 7 before multiplying by 4, 4 × (7 − 3) = 16, applies the operations in the wrong order. Substituting n = 8 by miscounting the position gives 4 × 8 − 3 = 29.
- (c) 100 — Method: apply the position-to-term rule straight to the position asked for, since it does not depend on the term before it. Working: the rule squares the position number and the position is 10, so the term is 10², which means 10 × 10. Answer: 100. The distractors: 81 comes from squaring 9 instead of 10, one position short; 20 comes from multiplying the position by 2 instead of squaring it; 1000 comes from cubing the position, 10 × 10 × 10, instead of squaring it.
- (d) 23 — Method: find the number added each time, then add it to the first term once for every step between the first term and the term wanted. Working: 5 − 2 = 3, 8 − 5 = 3 and so on, so 3 is added each time; the 8th term is seven steps on from the 1st term, so it is 2 + 7 × 3 = 2 + 21. Answer: 23, which agrees with counting on from the 5th term: 14, 17, 20 and then one step more. The distractors: 26 comes from adding the common difference eight times instead of seven, 2 + 8 × 3; 20 comes from stopping one term early, at the 7th term; 24 comes from multiplying the position by the common difference, 8 × 3, and ignoring the fact that the sequence starts at 2 rather than at 3.
- (b) 1215 — Method: generate the terms one at a time with the term-to-term rule and compare each with 1000 as you go, stopping at the first one that passes it. Working: the terms are 5, then 5 × 3 = 15, then 45, then 135, then 405, and 405 × 3 = 1215; 405 is still below 1000 while 1215 is above it. Answer: 1215. The distractors: 405 comes from stopping at the last term that is still below 1000 instead of giving the first one above it; 3645 comes from carrying on one term too far, past the first term that passes 1000; 2187 comes from using the multiplier 3 as the first term as well, generating 3, 9, 27, 81, 243, 729, 2187 instead of the sequence described.
- (b) 37 — The terms are 7, 13, 19, 25, 31, 37 — each found by adding 6 to the term before, so the 6th term is 37. Adding 6 six times to the first term instead of five times, 7 + 6 × 6 = 43, treats the first term as if it were before the sequence starts. Stopping one term early gives the 5th term, 31. Stopping two terms early gives the 4th term, 25.
- (a) 38 — Method: substitute the position number into the rule and follow the order of operations, so the squaring is carried out before the 2 is added. Working: n = 6 gives 6² + 2; 6² means 6 × 6 = 36, and then 2 is added to 36. Answer: 38. The distractors: 14 comes from multiplying the position by 2 instead of squaring it, 6 × 2 + 2; 36 comes from squaring correctly and then forgetting to add the 2; 64 comes from adding the 2 first and squaring afterwards, (6 + 2)².
- (c) 28 — Method: substitute values of n into 5n − 2 and check which of the options matches. Working: for n = 6, 5 × 6 − 2 = 30 − 2 = 28, so 28 is a term of the sequence, the 6th term. Answer: 28. 27 comes from using the rule 5n − 3 instead of 5n − 2. 30 comes from using 5n on its own, forgetting to subtract 2 at all. 20 comes from applying the subtraction before the multiplication, working out 5 × (n − 2) instead of 5n − 2.
- (d) Yes: the 8th term is 50 − 8 × 7 = −6, which is negative. — Method: find the 8th term by subtracting 8 a total of 7 times from the first term, since the 1st term itself needs 0 subtractions. Working: 8th term = 50 − 8 × 7 = 50 − 56 = −6, which is negative, so Priya is correct. Answer: Yes, the 8th term is 50 − 8 × 7 = −6, which is negative. The "50 − 8 × 6 = 2" option subtracts 8 only six times instead of seven, an off-by-one error in counting the steps. The "50 − 8 × 8 = −14" option subtracts 8 eight times instead of seven, the opposite off-by-one error. The claim that repeated subtraction "can never go negative" ignores that subtracting enough times from any starting value eventually gives a negative result.
- (c) 5n + 1 — Method: find the common difference, then use it as the coefficient of n in the position-to-term rule, and find the constant by checking against the first term. Working: the common difference is 5, so the rule has the form 5n + c. Using the 1st term: 5(1) + c = 6, so c = 1. The rule is 5n + 1. Answer: 5n + 1. 5n − 1 uses the correct coefficient but the wrong sign for the constant. 6n comes from using the first term as the coefficient of n instead of the common difference — it matches the 1st term by coincidence but fails from the 2nd term onward. n + 5 swaps the coefficient and the constant around, using the common difference as the constant instead of the coefficient of n.
- (a) 9 — Method: the gaps in this sequence are not constant, so work out each of the two terms named from the rule and then subtract the earlier from the later. Working: the 5th term is 5² + 1 = 25 + 1 = 26 and the 4th term is 4² + 1 = 16 + 1 = 17, so the difference is 26 − 17. Answer: 9. The distractors: 7 comes from using the 3rd and 4th terms, one position too early, 17 − 10; 11 comes from using the 5th and 6th terms, one position too late, 37 − 26; 1 comes from subtracting the position numbers, 5 − 4, instead of the terms themselves.
- (b) 64 — Method: a position-to-term rule is applied straight to the position number, so a term far along the sequence can be found without writing out the terms in between. Working: the rule multiplies the position by itself and the position asked for is 8, so the term is 8 × 8. Answer: 64. The distractors: 16 comes from multiplying the position by 2 instead of by itself; 81 comes from working out 9 × 9, one position too far along; 8 comes from writing down the position number itself as the term.
Build your own mix at the worksheet builder.