Printable · GCSE Foundation · ages 14-16
Generating sequences worksheet — GCSE Foundation
Fifteen questions on "generating sequences" — DfE statement A23. Print it, or print three versions so neighbours cannot copy by letter; the key gives the letter for each version.
Non-calculator
Answer key: Generating sequences worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (d) 13 — Method: the numbers of matchsticks form a sequence with a term-to-term rule, so count the first square in full and then add the repeated amount once for every extra square. Working: one square uses 4 matchsticks; a row of 4 squares has 3 extra squares after the first, and each of those adds 3 matchsticks, giving 3 × 3 = 9 to add on to the 4. Answer: 13. The distractors: 16 comes from counting each square as a separate set of 4 matchsticks, 4 × 4, and ignoring the shared sides; 12 comes from using 3 matchsticks for all four squares, 3 × 4, and forgetting that the first square needs a fourth side; 10 comes from adding the 3 only twice, as though a row of four squares had two extra squares rather than three.
- (c) 70 — Method: the numbers of tiles form a sequence in which the same amount is added for each extra row, so the total for a number of rows is that amount multiplied by the number of rows. Working: 20 − 10 = 10 and 30 − 20 = 10, so each row adds 10 tiles; 7 rows therefore need 7 lots of 10, that is 7 × 10. Answer: 70. The distractors: 80 comes from counting one row too many and giving the total for 8 rows; 17 comes from adding the 10 tiles to the 7 rows instead of multiplying; 10 comes from giving the number of tiles in a single row rather than the total for all the rows.
- (a) 52 — Test successive terms: n=6 gives 6²+3=39, which is not greater than 50. n=7 gives 7²+3=52, which is greater than 50, so the first term greater than 50 is 52. A candidate who stops at n=6, before checking whether 39 actually exceeds 50, would give 39. A candidate who solves n²>50 instead of n²+3>50, ignoring the +3 in the search, would find n=8 is the first value with n²>50 (since 7²=49) and compute 8²+3=67. A candidate who computes n² by doubling n instead of squaring it would compute 2×7+3=17.
- (a) 33 — Substitute n=4 into 2n²+1: 2×4²+1=2×16+1=33. A candidate who computes n² as 2×n instead of n×n would compute 2×(2×4)+1=2×8+1=17. A candidate who correctly finds 2×16 but forgets to add the constant 1 would stop at 32. A candidate who squares the whole term 2n, rather than squaring n before multiplying by 2, would compute (2×4)²+1=64+1=65.
- (b) 25 — Substitute n = 7: 4 × 7 − 3 = 28 − 3 = 25. Forgetting to subtract 3 gives 4 × 7 = 28. Subtracting 3 from 7 before multiplying by 4, 4 × (7 − 3) = 16, applies the operations in the wrong order. Substituting n = 8 by miscounting the position gives 4 × 8 − 3 = 29.
- (c) 32 — Using the rule 3n + 4: the 3rd term is 3 × 3 + 4 = 13, and the 5th term is 3 × 5 + 4 = 19, so their sum is 13 + 19 = 32. Forgetting to add the 4 for the 3rd term, 3 × 3 = 9, and adding the correct 5th term, gives 9 + 19 = 28. Rounding the 19 up to 20 to make the addition easier and then forgetting to take the extra 1 back off, 13 + 20 = 33, gives 33. Using the rule 4n + 3 instead of 3n + 4 gives 4 × 3 + 3 = 15 and 4 × 5 + 3 = 23, summing to 38.
- (d) 23 — Method: find the number added each time, then add it to the first term once for every step between the first term and the term wanted. Working: 5 − 2 = 3, 8 − 5 = 3 and so on, so 3 is added each time; the 8th term is seven steps on from the 1st term, so it is 2 + 7 × 3 = 2 + 21. Answer: 23, which agrees with counting on from the 5th term: 14, 17, 20 and then one step more. The distractors: 26 comes from adding the common difference eight times instead of seven, 2 + 8 × 3; 20 comes from stopping one term early, at the 7th term; 24 comes from multiplying the position by the common difference, 8 × 3, and ignoring the fact that the sequence starts at 2 rather than at 3.
- (d) Yes: the 8th term is 50 − 8 × 7 = −6, which is negative. — Method: find the 8th term by subtracting 8 a total of 7 times from the first term, since the 1st term itself needs 0 subtractions. Working: 8th term = 50 − 8 × 7 = 50 − 56 = −6, which is negative, so Priya is correct. Answer: Yes, the 8th term is 50 − 8 × 7 = −6, which is negative. The "50 − 8 × 6 = 2" option subtracts 8 only six times instead of seven, an off-by-one error in counting the steps. The "50 − 8 × 8 = −14" option subtracts 8 eight times instead of seven, the opposite off-by-one error. The claim that repeated subtraction "can never go negative" ignores that subtracting enough times from any starting value eventually gives a negative result.
- (b) 21 — Method: find the gap between neighbouring terms, then add one gap to the last term that is known. Working: 9 − 5 = 4, 13 − 9 = 4 and 17 − 13 = 4, so 4 is added each time; the 5th term is one step on from the 4th term, so it is 17 + 4. Answer: 21. The distractors: 25 comes from adding the 4 twice and landing on the 6th term; 20 comes from multiplying the position by the common difference, 5 × 4, and ignoring the fact that the sequence starts at 5 rather than at 4; 22 comes from adding the first term, 5, to 17 instead of adding the common difference.
- (b) 64 — Method: a position-to-term rule is applied straight to the position number, so a term far along the sequence can be found without writing out the terms in between. Working: the rule multiplies the position by itself and the position asked for is 8, so the term is 8 × 8. Answer: 64. The distractors: 16 comes from multiplying the position by 2 instead of by itself; 81 comes from working out 9 × 9, one position too far along; 8 comes from writing down the position number itself as the term.
- (c) 28 — Method: substitute values of n into 5n − 2 and check which of the options matches. Working: for n = 6, 5 × 6 − 2 = 30 − 2 = 28, so 28 is a term of the sequence, the 6th term. Answer: 28. 27 comes from using the rule 5n − 3 instead of 5n − 2. 30 comes from using 5n on its own, forgetting to subtract 2 at all. 20 comes from applying the subtraction before the multiplication, working out 5 × (n − 2) instead of 5n − 2.
- (a) 11 — Substitute n=6 into 2n−1: 2×6−1=11. A candidate who adds 2 and 6 and then subtracts 1, instead of multiplying 2 by 6 first, would compute 2+6−1=7. A candidate who substitutes the wrong term number, n=5, would reach 2×5−1=9. A candidate who forgets to subtract 1 would compute just 2×6=12.
- (c) 100 — Method: apply the position-to-term rule straight to the position asked for, since it does not depend on the term before it. Working: the rule squares the position number and the position is 10, so the term is 10², which means 10 × 10. Answer: 100. The distractors: 81 comes from squaring 9 instead of 10, one position short; 20 comes from multiplying the position by 2 instead of squaring it; 1000 comes from cubing the position, 10 × 10 × 10, instead of squaring it.
- (c) 32 — The terms are 60, 53, 46, 39, 32 — each found by subtracting 7 from the term before, so the 5th term is 32. Subtracting 7 five times from the first term instead of four times, 60 − 7 × 5 = 25, treats the first term as if it came before the sequence starts. Adding 7 four times instead of subtracting, 60 + 7 × 4 = 88, uses the wrong operation. Stopping one term early gives the 4th term, 39.
- (b) 37 — The terms are 7, 13, 19, 25, 31, 37 — each found by adding 6 to the term before, so the 6th term is 37. Adding 6 six times to the first term instead of five times, 7 + 6 × 6 = 43, treats the first term as if it were before the sequence starts. Stopping one term early gives the 5th term, 31. Stopping two terms early gives the 4th term, 25.
Build your own mix at the worksheet builder.