Printable · GCSE Foundation · ages 14-16

Roots, intercepts and turning points of quadratics worksheet — GCSE Foundation

Fifteen questions on "roots, intercepts and turning points of quadratics" — DfE statement A11. Print it, or print three versions so neighbours cannot copy by letter; the key gives the letter for each version.

part Higher

VersionsA only A + B A + B + Csame questions, different order

AnswersQuestions only With answer key Key only

CalculatorMixed Non-calculator (Paper 1)Calculator (Papers 2 and 3)

New sheet

Roots, intercepts and turning points of quadratics worksheet — GCSE Foundation

Maths · GCSE Foundation · A11 · Roots, intercepts and turning points of quadratics · 15 questions

MathsUKwww.geekhero.co.uk

1.A quadratic graph has equation y = (x − 4)². A student says this graph crosses the x-axis at two different points. Explain why the student is wrong.
(a)It touches the x-axis once, only at x = 4.
(b)It never touches the x-axis at all.
(c)It crosses twice, at x = 4 and x = −4.
(d)It crosses twice, at x = 2 and x = −2.
2.The graph of y = x² − 5x + 6 crosses the x-axis at two points. By factorising, work out the x-coordinates of these two points.
y = x² − 5x + 6
(a)x = −1 and x = −6
(b)x = 2 and x = −3
(c)x = 2 and x = 3
(d)x = −2 and x = −3
3.The graph of y = x² − 2x − 8 crosses the x-axis at x = −2 and x = 4. Work out the x-coordinate of the turning point of the curve, using the symmetry of the graph.
y = x² − 2x − 8
(a)x = −1
(b)x = 3
(c)x = 2
(d)x = 1
4.The graph of y = (x − 4)(x + 1) crosses the x-axis. Which pair gives the correct roots and reasoning?
(a)x = −4 and x = −1, because the roots are always the negative of the numbers shown in the brackets.
(b)x = 4 and x = 1, because both brackets must be positive at the roots.
(c)x = 4 and x = −1, because the graph crosses the x-axis where x − 4 = 0 or x + 1 = 0.
(d)x = −4 and x = 1, because the signs inside the brackets must be reversed to solve them.
5.A table shows values of y = x² − x − 6 for x from −3 to 4: at x = −3, y = 6; x = −2, y = 0; x = −1, y = −4; x = 0, y = −6; x = 1, y = −6; x = 2, y = −4; x = 3, y = 0; x = 4, y = 6. Using the table, write down the two roots of x² − x − 6 = 0.
y = x²
(a)x = −1 and x = 2
(b)x = −3 and x = 4
(c)x = 0 and x = 1
(d)x = −2 and x = 3
6.Work out the y-intercept of the graph of y = x² + 3x − 10.
y = x² + 3x − 10
(a)(−10, 0)
(b)(0, 3)
(c)(0, 10)
(d)(0, −10)
7.Which of these quadratic graphs does NOT cross the x-axis at all?
(a)y = (x − 2)² + 3
(b)y = (x + 4)(x − 1)
(c)y = (x − 2)(x + 3)
(d)y = x² − 9
8.A quadratic curve has a root at x = −2 and its turning point has x-coordinate 3. Work out the curve's other root, using the symmetry of the graph.
(a)x = −8
(b)x = 1
(c)x = 8
(d)x = 5
9.A graph has equation y = x² − 6x + 5. A student says its turning point has x-coordinate 6, because that's the coefficient of x. Which statement corrects the student's mistake?
y = x² − 6x + 5
(a)The student is correct, because the turning point's x-coordinate always equals the coefficient of x.
(b)The turning point has x-coordinate −6, because the sign of the coefficient must be reversed.
(c)The turning point has x-coordinate 5, because that is the larger of the equation's two roots.
(d)The roots of x² − 6x + 5 = 0 are x = 1 and x = 5 (since it factorises to (x − 1)(x − 5)), so by symmetry the turning point has x-coordinate 3, not 6.
10.A curve has equation y = x² − 9. Which statement about its graph is correct?
y = x² − 9
(a)It crosses the x-axis only once, at x = 9.
(b)It does not cross the x-axis, since −9 is negative.
(c)It crosses the x-axis at x = 9 and x = −9.
(d)It crosses the x-axis at x = 3 and x = −3.
11.The graph of y = x² + 2x − 15 crosses the x-axis at two points. By factorising, work out the x-coordinates of these two points.
y = x² + 2x − 15
(a)x = −3 and x = 5
(b)x = 5 and x = 3
(c)x = 3 and x = −5
(d)x = −15 and x = 1
12.The graph of y = (x − 2)(x + 5) crosses the x-axis at two points. Work out the x-coordinates of these two points.
(a)x = −2 and x = −5
(b)x = 2 and x = −5
(c)x = −2 and x = 5
(d)x = 2 and x = 5
13.A ball's height, h metres, t seconds after being thrown follows h = (t − 1)(9 − t). Given that the ball is at ground level at t = 1 and t = 9, work out at what time t the ball reaches its maximum height, using symmetry.
(a)t = 4
(b)t = 8
(c)t = 10
(d)t = 5
14.A quadratic curve has a minimum turning point at (3, −4). Which of these statements about the curve must be true?
(a)It does not cross, since the minimum lies below the axis.
(b)It crosses the x-axis, since the minimum is below it.
(c)It touches the x-axis once, at (3, −4).
(d)It is impossible to tell without the full equation.
15.A quadratic graph has roots at x = −3 and x = 5, and it crosses the y-axis at (0, −15). Work out the equation of the curve in the form y = (x − a)(x − b).
(a)y = (x − 3)(x − 5)
(b)y = (x − 3)(x + 5)
(c)y = (x + 3)(x + 5)
(d)y = (x + 3)(x − 5)

Answer key

(a) It touches the x-axis once, only at x = 4. — (x − 4)² is a square, so it equals zero only when x − 4 = 0, that is at x = 4 — the curve just touches the x-axis there rather than crossing it, since a square cannot be negative on either side to cross through. Saying it crosses at x = 4 and x = −4 wrongly introduces a plus-or-minus, as if taking a square root of x, rather than recognising the bracket is already squared and only zero once. Saying it never touches the x-axis forgets that a squared term CAN equal zero, even though it can never be negative. Saying it crosses at x = 2 and x = −2 confuses (x − 4)² with the different expression x² − 4.
(c) x = 2 and x = 3 — x² − 5x + 6 factorises as (x − 2)(x − 3), since −2 and −3 multiply to give 6 and add to give −5. The graph crosses the x-axis where each bracket equals zero: x − 2 = 0 gives x = 2, and x − 3 = 0 gives x = 3. The option x = −2 and x = −3 comes from reading the signs inside the brackets directly instead of solving x − 2 = 0 and x − 3 = 0. The option x = 2 and x = −3 mixes up the sign of only one root. The option x = −1 and x = −6 comes from picking the wrong pair of factors of 6 (1 and 6 instead of 2 and 3) and then reading their signs directly from the brackets.
(d) x = 1 — A quadratic graph is symmetrical about its turning point, so the turning point's x-coordinate is the midpoint of the two roots: (−2 + 4) ÷ 2 = 2 ÷ 2 = 1. The option x = 2 comes from adding the two roots but forgetting to divide by 2. The option x = −1 makes a sign error when adding the roots, treating −2 + 4 as −2. The option x = 3 comes from subtracting the roots instead of adding them: (4 − (−2)) ÷ 2 = 3.
(c) x = 4 and x = −1, because the graph crosses the x-axis where x − 4 = 0 or x + 1 = 0. — The graph crosses the x-axis where y = 0, which happens when either bracket equals zero. Solving x − 4 = 0 gives x = 4, and solving x + 1 = 0 gives x = −1. The option x = −4 and x = 1 incorrectly reverses both signs. The option x = 4 and x = 1 misreads the second bracket, ignoring that x + 1 = 0 requires x to be negative. The option x = −4 and x = −1 wrongly assumes both roots must be the negative of the constants shown, which only matches the second bracket, not the first.
(d) x = −2 and x = 3 — The roots are the x-values where y = 0. Reading the table, y = 0 at x = −2 and at x = 3, so these are the two roots. Choosing x = −3 and x = 4 picks the endpoints of the table, where y = 6, not where y = 0. Choosing x = −1 and x = 2 picks values near the curve's lowest points, where y = −4, not where the curve crosses the axis. Choosing x = 0 and x = 1 picks the two x-values in the middle of the table without checking their y-values, which are both −6, not 0.
(d) (0, −10) — The y-intercept occurs where x = 0. Substituting x = 0 into y = x² + 3x − 10 gives y = 0 + 0 − 10 = −10, so the graph crosses the y-axis at (0, −10). The option (0, 3) mistakenly uses the coefficient of x instead of the constant term. The option (0, 10) makes a sign error, dropping the negative from the constant term. The option (−10, 0) swaps the x- and y-coordinates, which would instead be a point on the x-axis, not the y-axis.
(a) y = (x − 2)² + 3 — Since (x − 2)² is never negative, (x − 2)² + 3 is always at least 3, so y can never equal 0 and the graph never crosses the x-axis. The other three graphs are all given in a factorised or difference-of-squares form that shows two real roots: y = (x − 2)(x + 3) crosses at x = 2 and x = −3; y = x² − 9 = (x − 3)(x + 3) crosses at x = 3 and x = −3; y = (x + 4)(x − 1) crosses at x = −4 and x = 1.
(c) x = 8 — The turning point lies exactly halfway between the two roots. If the other root is r, the midpoint of −2 and r must be 3, so (−2 + r) ÷ 2 = 3, giving r = 8. Choosing x = 5 comes from adding 2 and 3 rather than using the midpoint relationship correctly. Choosing x = 1 comes from subtracting 2 from 3 instead of reflecting −2 across the turning point. Choosing x = −8 finds the right distance but then reflects in the y-axis instead of in the line of symmetry x = 3, so the sign of the answer is flipped.
(d) The roots of x² − 6x + 5 = 0 are x = 1 and x = 5 (since it factorises to (x − 1)(x − 5)), so by symmetry the turning point has x-coordinate 3, not 6. — Factorising, x² − 6x + 5 = (x − 1)(x − 5), so the roots are x = 1 and x = 5. The turning point lies midway between the roots by symmetry: (1 + 5) ÷ 2 = 3. The coefficient of x has no direct role in locating the turning point this way. The option giving −6 makes an arbitrary sign change with no mathematical basis. The option giving 5 wrongly takes just one of the two roots instead of their midpoint.
(d) It crosses the x-axis at x = 3 and x = −3. — y = x² − 9 factorises as (x − 3)(x + 3), since 9 = 3², so the curve crosses the x-axis at x = 3 and x = −3. Saying it crosses once at x = 9 mistakes the constant term for a root directly, without taking its square root. Saying it crosses at x = 9 and x = −9 makes the same mistake but adds a sign either way. Saying it does not cross the x-axis confuses the y-intercept, which is negative at (0, −9), with the number of times the curve meets the x-axis — a negative y-intercept combined with an upward-opening curve guarantees it crosses the x-axis twice.
(c) x = 3 and x = −5 — To factorise x² + 2x − 15, find two numbers that multiply to −15 and add to 2: these are 5 and −3, since 5 × (−3) = −15 and 5 + (−3) = 2. So x² + 2x − 15 = (x + 5)(x − 3). Setting each factor to zero gives x = −5 and x = 3. Choosing x = −3 and x = 5 comes from swapping the signs of the correct roots. Choosing x = 5 and x = 3 uses the right pair of numbers, 5 and 3, but forgets that one of them must be negative for the product to equal −15. Choosing x = −15 and x = 1 mistakes the constant term, −15, for one of the roots, and pairs it oddly with x = 1.
(b) x = 2 and x = −5 — Set each factor equal to zero: x − 2 = 0 gives x = 2, and x + 5 = 0 gives x = −5, so the graph crosses the x-axis at x = 2 and x = −5. Writing x = −2 and x = 5 flips the sign of both roots. Writing x = 2 and x = 5 keeps the first root correct but forgets to flip the sign for the second factor, using +5 instead of solving x + 5 = 0. Writing x = −2 and x = −5 flips the sign of the first root only, from solving x − 2 = 0 as x = −2.
(d) t = 5 — The maximum height occurs halfway between the two times when the ball is at ground level: the midpoint of t = 1 and t = 9 is (1 + 9) ÷ 2 = 5, so the ball reaches its maximum height at t = 5 seconds. Getting t = 4 comes from halving the DIFFERENCE between the times, 9 − 1 = 8, then 8 ÷ 2 = 4, instead of finding their midpoint. Getting t = 8 uses that difference, 9 − 1 = 8, as if the gap between the two times were itself the time of the maximum. Getting t = 10 adds the two times, 1 + 9 = 10, but forgets to divide by 2.
(b) It crosses the x-axis, since the minimum is below it. — A minimum turning point at (3, −4) means the lowest value the curve reaches is y = −4, which is below the x-axis (y = 0); since the curve opens upward from there, it must rise up through y = 0 on both sides, crossing the x-axis twice. Saying it does not cross confuses 'the minimum is negative' with 'the whole curve stays negative' — a minimum below the axis guarantees the curve rises above it elsewhere. Saying it touches the x-axis once at (3, −4) mistakes the turning point itself for a root — the turning point is not on the x-axis at all here, since its y-coordinate is −4, not 0. Saying it is impossible to tell ignores that the two facts given — that the turning point is a minimum, and that its y-coordinate is negative — are together enough to decide the number of crossings without knowing the equation.
(d) y = (x + 3)(x − 5) — A root at x = −3 means the matching bracket must be zero when x = −3, so the bracket is (x − (−3)) = (x + 3). A root at x = 5 means the other bracket is (x − 5). So the equation is y = (x + 3)(x − 5); checking the y-intercept, (0 + 3)(0 − 5) = 3 × (−5) = −15, which matches the given value. The option (x − 3)(x + 5) swaps the signs of both roots. The option (x + 3)(x + 5) keeps the correct sign for the first root but gets the second wrong. The option (x − 3)(x − 5) gets the first root's sign wrong.

Build your own mix at the worksheet builder.