Printable · GCSE Foundation · ages 14-16
Recognising and sketching graphs worksheet — GCSE Foundation
Fifteen questions on "recognising and sketching graphs" — DfE statement A12. Print it, or print three versions so neighbours cannot copy by letter; the key gives the letter for each version.
part Higher
Answer key: Recognising and sketching graphs worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (a) y = x² + 2 — A quadratic equation, with x², gives a graph shaped like a symmetrical U (or an upside-down U). Of the four equations, y = x² + 2 is quadratic, so it gives this U-shape. y = x³ + 2 is cubic, giving an S-shaped curve rather than a symmetrical U. y = 2x + 2 is linear, giving a straight line. y = 2/x is reciprocal, giving two separate curved branches rather than a single U-shape.
- (c) −8 — (−2)³ = (−2) × (−2) × (−2) = −8, since multiplying three negative numbers gives a negative result. A candidate who forgets the sign of a negative number when cubing it might treat (−2)³ as if it were 2³ = 8. A candidate who multiplies −2 by 3 instead of cubing it might get −2 × 3 = −6. A candidate who combines both mistakes — multiplying by 3 and dropping the sign — might get 2 × 3 = 6.
- (d) The graph never crosses either axis — Since x ≠ 0, there is no point on the graph where x = 0, so it cannot cross the y-axis; likewise 1/x is never equal to 0 for any x, so it cannot cross the x-axis either — the graph never touches either axis. A candidate who forgets the restriction x ≠ 0 might think the graph behaves like other graphs and passes through the origin, (0, 0). A candidate who correctly rules out the x-axis but forgets that x = 0 is also excluded might say the graph crosses the y-axis but never the x-axis. A candidate who only pictures the branch where x and y are both positive might say the graph has only one branch, in quadrant 1, forgetting the second branch where x and y are both negative.
- (d) $y = x^2 - 2x - 3$ — Method: read the two x-intercepts (roots) from the graph, write the quadratic as the product of the corresponding factors, then expand. Working: the curve crosses the x-axis at x = −1 and x = 3, so the equation factorises as (x + 1)(x − 3), which expands to x² − 2x − 3. Answer: y = x² − 2x − 3. Distractor refutation: y = x² − x − 6 comes from misreading the left-hand crossing point as x = −2 instead of x = −1, giving factors (x + 2)(x − 3). y = x² − x − 2 comes from misreading the right-hand crossing point as x = 2 instead of x = 3, giving factors (x + 1)(x − 2). y = x² + 2x − 3 comes from writing the factors as (x − 1)(x + 3), swapping which root gets the plus sign and which gets the minus sign, giving the wrong sign on the x term.
- (d) $y = x^2 + 3$ — Method: a point lies on a curve only if substituting its x-coordinate into the equation gives back its y-coordinate, so read one or two points off curve B and test each equation. Working: curve B crosses the y-axis at (0, 3), and its lowest point is also (0, 3); substituting x = 0 into y = x² + 3 gives 0² + 3 = 3, which matches. Checking a second point: at x = 2 curve B is at y = 7, and 2² + 3 = 4 + 3 = 7, which matches as well. Answer: curve B has equation y = x² + 3. Distractor refutation: y = x² − 3 comes from reading the 3 as a move down instead of a move up; substituting x = 0 gives −3, so that curve would cross the y-axis three squares below the origin, while curve B crosses it three squares above. y = (x − 3)² comes from putting the 3 inside the brackets; substituting x = 0 gives (−3)² = 9, and that curve's lowest point is at (3, 0), three squares to the right along the x-axis, whereas curve B has its lowest point on the y-axis. y = x² + 3x comes from attaching the 3 to the x term instead of writing it on its own; substituting x = 0 gives 0² + 3 × 0 = 0, so that curve passes through the origin, and curve B does not pass through the origin.
- (b) £14 — Method: read the fixed charge (the cost at 0 miles) and the rate (the cost per extra mile) from the graph, then use them to work out the cost for a distance beyond the part that is plotted. Working: the graph shows a fixed charge of £2 at 0 miles, and the cost rises by £2 for every extra mile, so for 6 miles the cost is £2 + (£2 × 6) = £2 + £12 = £14. Answer: £14. Distractor refutation: £12 comes from multiplying the rate by the distance and leaving out the £2 fixed charge. £8 comes from misreading the rate as £1 per mile instead of £2 per mile. £24 comes from adding the fixed charge to the rate first and then multiplying the total by the distance, instead of multiplying the rate by the distance and then adding the fixed charge.
- (a) x = −1.8 and x = 2.8 — Method: the solutions of x² − x − 2 = 3 are the x-coordinates of the points where the curve y = x² − x − 2 meets the line y = 3, read off the grid to 1 decimal place. Working: the curve meets the line y = 3 at approximately x = −1.8 and at x = 2.8. Answer: x ≈ −1.8 and x ≈ 2.8. Distractor refutation: x = −1.0 and x = 2.0 comes from reading where the curve crosses the x-axis (y = 0), solving x² − x − 2 = 0, instead of where it meets the line y = 3. x = −3.0 and x = 4.0 comes from taking the two ends of the drawn curve as the intersection points, instead of finding where it actually crosses the line y = 3. x = 1.8 and x = 2.8 comes from a sign slip on the left-hand intersection, reading it as positive instead of negative.
- (d) $y = 2x - 1$ — Method: pick two points the line passes through, work out the gradient as vertical change ÷ horizontal change, and read the y-intercept from where the line crosses the y-axis. Working: the line passes through (0, −1) and (1, 1), so the gradient is (1 − (−1)) ÷ (1 − 0) = 2, and it crosses the y-axis at −1. Answer: y = 2x − 1. Distractor refutation: y = 2x + 1 comes from reading the y-intercept as +1 instead of −1, misreading which side of the origin the line crosses. y = x − 1 comes from taking the gradient as 1, counting the same number of squares across and up instead of checking the rise is twice the run. y = −2x − 1 comes from a sign error on the gradient, treating the line as sloping downward from left to right when it actually rises.
- (b) y = 1/x — A graph with two separate curved branches must have a value of x that is excluded from it, creating a break in the curve. For y = 1/x, x = 0 is excluded, so the graph splits into one branch where x and y are both positive, and one where x and y are both negative. y = x² is a single U-shaped curve with no break, even though it has two 'arms'. y = x³ is one continuous curve that passes through the origin without any break. y = 2x + 1 is a single straight line; even though it passes through regions where x and y share the same sign, it is one continuous line, not two separate branches.
- (b) One turning point. — Every quadratic graph, one with an x² term and no higher power of x, has exactly one turning point, since it is a single U-shaped or n-shaped curve. Saying two turning points describes a cubic graph, which can rise, turn, then turn again. Saying no turning points describes a straight line, which has none. Saying four turning points greatly overestimates how many times a simple quadratic curve changes direction — that would need a much higher power of x.
- (c) (0, 0) — A curve crosses the y-axis where x = 0. Substituting x = 0 into y = x³ − 4x gives y = 0³ − 4(0) = 0 − 0 = 0, so the curve crosses the y-axis at (0, 0). A candidate who reads off the coefficient of x as the y-intercept, instead of working out the constant term, might write (0, −4). A candidate who swaps the coordinates might write (4, 0). A candidate who takes the coefficient of x but drops its sign might write (0, 4).
- (b) A straight line. — y = 3x + 2 is a linear function, since the highest power of x is 1, so its graph is a straight line with gradient 3 and y-intercept 2. Saying it is a U-shaped curve confuses a linear graph with a quadratic graph, which has an x² term. Saying it decreases then increases describes a curve with a turning point, which a straight line does not have. Saying it gets closer to an axis but never reaches it describes a reciprocal graph, y = k/x, not a linear one.
- (b) y = 2x − 3 — A straight-line graph has an equation of the form y = mx + c, where x appears only to the power 1. Of the four equations, y = 2x − 3 fits this form, so it gives a straight line. y = x² − 3 has x squared, so it gives a curved (quadratic) graph, not a straight line. y = x³ − 3 has x cubed, so it gives a cubic curve. y = 3/x has x on the bottom of a fraction, so it gives a reciprocal curve with two branches.
- (b) 10 km — Method: find the constant speed from the graph (distance ÷ time for any point on the line), then multiply that speed by 20 minutes. Working: the line passes through (4 minutes, 2 km), so the speed is 2 ÷ 4 = 0.5 km per minute; in 20 minutes the cyclist travels 0.5 × 20 = 10 km. Answer: 10 km. Distractor refutation: 3 km comes from reading off the distance shown at the end of the plotted section (6 minutes) and stopping there, instead of extending the line to 20 minutes. 20 km comes from misreading the speed as 1 km per minute instead of 0.5 km per minute, doubling the true rate. 40 km comes from dividing 20 by the speed instead of multiplying by it, a reciprocal mix-up.
- (a) −2 and 2 — Method: the graph crosses the x-axis where y = 0, so read the two crossing points straight off the curve. Working: the curve meets the horizontal axis two squares to the left of the origin and two squares to the right, at x = −2 and x = 2. Answer: −2 and 2. Distractor refutation: −4 and 4 comes from reading the value where the curve crosses the y-axis, −4, and using that value and its positive partner as the x-axis crossings instead. −2 and 3 comes from misreading the right-hand crossing point one square out along the grid, taking it where the curve is already above the axis. 0 and 2 comes from confusing the lowest point of the curve, which sits on the y-axis at x = 0, with one of the crossing points.
Build your own mix at the worksheet builder.