Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.To rearrange y = 2x − 5 to make x the subject, Sam writes: 'Add 5 to both sides to get y + 5 = 2x, then divide both sides by 2 to get x = (y + 5)/2.' Which statement about Sam's method is correct?y = 2x − 5
- 2.The graph of y = x² − 5x + 6 crosses the x-axis at two points. By factorising, work out the x-coordinates of these two points.y = x² − 5x + 6
- 3.The simple interest, £I, earned on a savings account is given by the formula I = PRT/100, where P is the amount invested in pounds, R is the interest rate per year and T is the time in years. Rearrange the formula to make P the subject.
- 4.Solve x² − x − 12 = 0.
- 5.Expand 2(x + 12)
- 6.Isla says that the lines y = 2x + 1 and y = −2x + 3 are parallel. Write down the statement that gives the correct answer for the correct reason.y = 2x + 1y = -2x + 3
- 7.Work out the gradient of the straight line that passes through the points (−1, 5) and (3, −7).
- 8.A speed-time graph for a car shows the speed increasing steadily from 5 m/s to 17 m/s over 6 seconds. Work out the acceleration of the car, in m/s².
- 9.A straight line has gradient −2 and passes through the point (3, 1). Work out the equation of the line.
- 10.The expression 6n + 15 is written as 3(2n + 5). Which statement is correct?
- 11.A straight line has equation y = 2x − 7. Write down the coordinates of the point where the line crosses the y-axis.y = 2x − 7
- 12.Which of these values of x is a solution of x² + 2x − 15 = 0?
- 13.The first five terms of a sequence are 2, 5, 8, 11, 14. Work out an expression, in terms of n, for the nth term.
- 14.Which expression means 'triple c, then add double d'?
- 15.ABCD is a parallelogram. A has coordinates (−3, 1), B has coordinates (2, 1) and C has coordinates (4, 4). Work out the coordinates of D.
Answer key
- (c) Yes; x = (y + 5)/2 is right — Sam's method is correct throughout: adding 5 to both sides gives y + 5 = 2x, and dividing both sides by 2 gives x = (y + 5)/2, so Sam is right. The option giving x = (y − 5)/2 assumes 5 should be subtracted again, but 2x − 5 = y means 5 has already been subtracted, so it must be added back, not taken away a second time. The option giving x = y/2 + 5 divides only the y term by 2 and leaves the 5 unhalved, which is not a valid rearrangement. The option agreeing Sam is correct but changing step 2 to x = 2(y + 5) confuses '2x' with 'x divided by 2' — since x is multiplied by 2, the inverse is division, not multiplication. Sam's working, and his final formula x = (y + 5)/2, are both correct.
- (c) x = 2 and x = 3 — x² − 5x + 6 factorises as (x − 2)(x − 3), since −2 and −3 multiply to give 6 and add to give −5. The graph crosses the x-axis where each bracket equals zero: x − 2 = 0 gives x = 2, and x − 3 = 0 gives x = 3. The option x = −2 and x = −3 comes from reading the signs inside the brackets directly instead of solving x − 2 = 0 and x − 3 = 0. The option x = 2 and x = −3 mixes up the sign of only one root. The option x = −1 and x = −6 comes from picking the wrong pair of factors of 6 (1 and 6 instead of 2 and 3) and then reading their signs directly from the brackets.
- (a) P = 100I / (RT) — Method: undo the operations done to P in reverse order — multiply by 100, then divide by R and by T. Working: I = PRT/100, so 100I = PRT, so P = 100I / (RT). Answer: P = 100I / (RT). P = IRT/100 comes from leaving R and T in the numerator instead of moving them to the denominator. P = 100RT/I comes from swapping P and I when rearranging. P = 100I/R comes from dividing by R only and forgetting to also divide by T.
- (a) x = 4 or x = −3 — Method: find two numbers that multiply to give −12 and add to give −1 — these are −4 and 3. So x² − x − 12 = (x − 4)(x + 3) = 0, giving x = 4 or x = −3. Distractor origins: x = −4 or x = 3 has the signs the wrong way round; x = 4 or x = 3 makes both roots positive, ignoring the sign of −12; x = 12 or x = −1 comes from reading off the coefficient and the constant directly instead of factorising.
- (a) 2x + 24 — Method: multiply each term inside the bracket by the 2 in front of it. Working: 2 × x = 2x and 2 × 12 = 24, and the products are added because the bracket contains an addition. Answer: 2x + 24. The distractors: 2x + 12 comes from multiplying only the x by 2 and copying the 12 across unchanged; 24x comes from multiplying 2 by 12 and then attaching the letter to that product, as though the two terms inside the bracket could be joined into one; 2x + 14 comes from adding 2 and 12 instead of multiplying them.
- (b) No, because their gradients are 2 and −2 — Method: two lines are parallel exactly when their gradients are equal as signed numbers, so m is read from each equation written in the form y = mx + c and the two are compared. Working: y = 2x + 1 has gradient 2 and y = −2x + 3 has gradient −2; those are not equal, so the lines are not parallel, and indeed one slopes upwards while the other slopes downwards. Answer: No, because their gradients are 2 and −2. The distractors: saying yes because both gradients have size 2 comes from comparing the sizes of the gradients and ignoring their signs; saying yes because the gradients add to 0 comes from using a sum of zero as the test for parallel lines instead of equality of gradients; saying no because the y-intercepts are 1 and 3 reaches the right verdict by the wrong route, since the intercepts decide where the lines sit rather than whether they are parallel.
- (b) −3 — Method: the gradient of a straight line is the change in y divided by the change in x, with the two coordinates taken in the same order in the numerator as in the denominator. Working: going from (−1, 5) to (3, −7), the change in y is −7 − 5 = −12 and the change in x is 3 − (−1) = 4, so the gradient is −12 ÷ 4 = −3. Answer: −3. The distractors: 3 comes from subtracting the y-coordinates in one order and the x-coordinates in the other, giving 12 ÷ 4; −1/3 comes from dividing the change in x by the change in y instead of the other way round, giving 4 ÷ (−12); −6 comes from working out 3 − (−1) as 3 − 1 = 2, so that the change in y is divided by 2 rather than by 4.
- (a) 2 m/s² — Method: acceleration = change in speed ÷ time = (17 − 5) ÷ 6 = 12 ÷ 6 = 2 m/s². Distractor origins: 12 m/s² stops after finding the change in speed and forgets to divide by the time; 22 m/s² adds the two speeds instead of subtracting them, and also forgets to divide by time (5 + 17 = 22); 72 m/s² multiplies the change in speed by the time instead of dividing (12 × 6 = 72).
- (a) y = −2x + 7 — Using y = −2x + c, and substituting the point (3, 1): 1 = −2(3) + c, so 1 = −6 + c, and c = 7, giving y = −2x + 7. A candidate who uses the y-coordinate of the point directly as the y-intercept, instead of solving for c, would write y = −2x + 1. A candidate who drops the negative sign on the gradient would write y = 2x + 7. A candidate who makes a sign error when isolating c, writing c = 1 − 6 = −5 instead of c = 1 + 6 = 7, would write y = −2x − 5.
- (c) 3 and 2n + 5 are both factors of 6n + 15 — Factors are the parts multiplied together to make an expression; terms are the parts added together. In 3(2n + 5) the 3 and the bracket 2n + 5 are multiplied, so both of them are factors of 6n + 15. The parts added together are 6n and 15, and those are its two terms, not its factors. A factor need not be a number: a bracket containing letters is a factor in exactly the same way.
- (d) (0, −7) — At the y-axis, x = 0, so y = 2(0) − 7 = −7, giving the point (0, −7). A candidate who drops the negative sign on the constant term would write (0, 7). A candidate who swaps the coordinates, confusing the y-intercept with an x-intercept, would write (−7, 0). A candidate who uses the gradient, 2, as the x-coordinate instead of 0 would write (2, −7).
- (a) x = 3 — Method: factorise x² + 2x − 15 as (x + 5)(x − 3), since 5 × (−3) = −15 and 5 + (−3) = 2. Setting each bracket equal to zero gives x + 5 = 0 or x − 3 = 0, so x = −5 or x = 3. Only x = 3 is offered here. Distractor origins: x = −3 reverses the sign of the factor pair, treating the bracket (x − 3) as giving x = −3 instead of x = 3; x = 5 takes the number from the other factor, (x + 5), but with the wrong sign, giving x = 5 instead of x = −5; x = 15 takes the constant term of the original expression as if it were a root, without factorising at all.
- (a) 3n − 1 — Method: find the common difference between consecutive terms, then find the constant by adjusting the first term. Working: 5 − 2 = 3, 8 − 5 = 3, 11 − 8 = 3, so the common difference is 3 and the coefficient of n is 3. The constant is the first term minus the common difference: 2 − 3 = −1. Answer: the nth term is 3n − 1. 3n + 2 comes from using the first term, 2, as the constant without subtracting the common difference. 3n − 2 comes from a slip when working out the constant, treating 2 − 3 as −2 instead of −1. 2n + 3 comes from swapping the common difference and the first term.
- (c) 3c + 2d — Method: 'triple c' is 3c, 'double d' is 2d, and 'add' joins the two separate terms with a plus sign. Working: 3c + 2d. Answer: 3c + 2d. 2c + 3d comes from swapping which letter gets tripled and which gets doubled. 6cd comes from multiplying the two terms together instead of adding them, and also multiplying the coefficients (3 × 2 = 6). 5(c + d) comes from adding the coefficients (3 + 2 = 5) and applying that single number to both letters together, as if c and d always came as a pair.
- (d) (−1, 4) — In parallelogram ABCD the side DC is parallel and equal to the side AB, so D = C − AB. The vector from A to B is (2 − (−3), 1 − 1) = (5, 0), so D = (4 − 5, 4 − 0) = (−1, 4). A candidate who adds this vector to C instead of subtracting it gets (4 + 5, 4 + 0) = (9, 4). A candidate who subtracts A's coordinates from C's rather than the vector AB, and drops the minus sign on −3 while doing so, works out (4 − 3, 4 − 1) and gets (1, 3). A candidate who makes only the y-part of that slip, working out 4 − 1 instead of 4 − 0, gets (−1, 3).
Build your own mix at the worksheet builder.