Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.Work out the distance of the point (−6, 4) from the x-axis.
- 2.A rectangular field has length (3a + 2) metres and width (a − 1) metres. Write a simplified expression for the perimeter of the field.
- 3.A straight line has equation y = 2x − 7. Write down the coordinates of the point where the line crosses the y-axis.y = 2x − 7
- 4.Expand 4(2x − 3).
- 5.A rule turns each input x into an output y. The inputs are x = 1, 2, 3, 4 and the matching outputs are y = −5, −3, −1 and one missing value. Work out the missing value of y.
- 6.Work out the value of 5y + 9 when y = 0
- 7.The diagram shows the graph of a quadratic function. Write down the values of x where the graph crosses the x-axis.
- 8.A sequence has the position-to-term rule n² + 1, where n is the position number. Work out how much bigger the 5th term is than the 4th term.
- 9.The first four terms of a sequence are 11, 18, 25, 32. Ravi thinks the nth term is 7n. Work out the correct expression for the nth term.
- 10.The solution set of x ≥ −1 is drawn on a number line. Which description of that number line is correct?
- 11.A gas company charges a standing charge plus a rate per unit used. The total cost, y in pounds, for using x units is given by y = 0.15x + 20. Work out the cost of using 200 units.y = 0.15x + 20
- 12.Which of these equations describes a vertical line?
- 13.A straight line has equation y = 4x + 3. A second line is parallel to the first line and passes through the point (0, −5). Work out the equation of the second line.y = 4x + 3
- 14.Solve x² − x − 12 = 0.
- 15.A number machine multiplies its input by 3 and then adds 7. The output is 1. Work out the input.
Answer key
- (c) 4 — Method: the distance of a point from the x-axis is measured vertically, so it is the size of the y-coordinate taken without its sign. Working: the point (−6, 4) has y-coordinate 4, so moving straight down to the x-axis covers 4 units, and a distance is written as a positive number. Answer: 4. The distractors: 6 comes from using the x-coordinate, which measures the distance from the y-axis rather than from the x-axis; −6 comes from that same mistake with the minus sign left in place, although a distance is never negative; 10 comes from adding the two distances, 6 and 4, as though the question asked how far the point is from both axes together.
- (c) 8a + 2 — The perimeter of a rectangle is twice the length plus twice the width: P = 2(3a + 2) + 2(a − 1) = (6a + 4) + (2a − 2) = 8a + 2. Answering 5a adds the length and width once each but doubles only one of them, missing that a rectangle has two of each side. Answering 8a + 6 distributes the 2 into (a − 1) correctly as far as 2a, but then adds 2 instead of subtracting it, as though the bracket had been (a + 1). Answering 12a + 8 uses the length for all four sides instead of using the length twice and the width twice, as if the field were a square with side (3a + 2). The perimeter of the field is (8a + 2) metres.
- (d) (0, −7) — At the y-axis, x = 0, so y = 2(0) − 7 = −7, giving the point (0, −7). A candidate who drops the negative sign on the constant term would write (0, 7). A candidate who swaps the coordinates, confusing the y-intercept with an x-intercept, would write (−7, 0). A candidate who uses the gradient, 2, as the x-coordinate instead of 0 would write (2, −7).
- (c) 8x − 12 — Multiply each term inside the bracket by 4: 4 × 2x = 8x and 4 × (−3) = −12, so 4(2x − 3) = 8x − 12. A candidate who forgets to multiply the second term by 4 gets 8x − 3. A candidate who makes a sign error, treating 4 × (−3) as +12, gets 8x + 12. A candidate who adds 4 to the bracket instead of multiplying gets 2x + 1.
- (d) 1 — Method: find the step in the outputs for each step of 1 in the input, write the rule from that step and from one pair of values, then apply the rule to the last input. Working: the outputs −5, −3, −1 rise by 2 while x rises in ones, so x is multiplied by 2; at x = 1, 2 × 1 = 2 while y = −5, so 7 is subtracted, giving y = 2x − 7; at x = 4 the rule gives 2 × 4 = 8 and 8 − 7 = 1. Answer: y = 1. The distractors: 3 comes from carrying the outputs on one step too far, to x = 5; 0 comes from assuming the outputs −5, −3, −1 carry on by adding 1 rather than by adding 2; 8 comes from doubling the input and forgetting to subtract the 7.
- (c) 9 — Method: replace the letter with the value given for it, then work out the multiplication before the addition. Working: 5y means 5 × y, and 5 × 0 = 0, so the expression becomes 0 + 9, which is 9. Answer: 9. The distractors: 14 comes from treating 5 × 0 as 5, a common slip with zero, and then adding the 9; 0 comes from assuming that an expression containing a zero must itself be zero, so the + 9 is ignored; 45 comes from multiplying the whole expression by 5 instead of multiplying only y, giving 5 × (0 + 9).
- (a) −2 and 2 — Method: the graph crosses the x-axis where y = 0, so read the two crossing points straight off the curve. Working: the curve meets the horizontal axis two squares to the left of the origin and two squares to the right, at x = −2 and x = 2. Answer: −2 and 2. Distractor refutation: −4 and 4 comes from reading the value where the curve crosses the y-axis, −4, and using that value and its positive partner as the x-axis crossings instead. −2 and 3 comes from misreading the right-hand crossing point one square out along the grid, taking it where the curve is already above the axis. 0 and 2 comes from confusing the lowest point of the curve, which sits on the y-axis at x = 0, with one of the crossing points.
- (a) 9 — Method: the gaps in this sequence are not constant, so work out each of the two terms named from the rule and then subtract the earlier from the later. Working: the 5th term is 5² + 1 = 25 + 1 = 26 and the 4th term is 4² + 1 = 16 + 1 = 17, so the difference is 26 − 17. Answer: 9. The distractors: 7 comes from using the 3rd and 4th terms, one position too early, 17 − 10; 11 comes from using the 5th and 6th terms, one position too late, 37 − 26; 1 comes from subtracting the position numbers, 5 − 4, instead of the terms themselves.
- (a) 7n + 4 — Method: find the common difference, then find the constant that fits the first term. Working: 18 − 11 = 7, 25 − 18 = 7, 32 − 25 = 7, so the terms increase by 7 each time and the nth term has the form 7n + c. Substituting n = 1: 7(1) + c = 11, so c = 4. Answer: the correct nth term is 7n + 4. The value 7n is Ravi's value, which comes from using only the common difference and leaving out the constant. The value 7n + 11 comes from using the first term as the constant directly, without subtracting the common difference first. The value 11n + 7 comes from swapping the roles of the first term and the common difference — using the first term, 11, as the coefficient of n and the difference, 7, as the constant.
- (c) A solid circle at −1 with the arrow pointing right — Method: a number line picture of an inequality carries two decisions: the circle at the boundary says whether the boundary value itself belongs to the solution set, and the arrow says which way the solutions run. Working: the sign is ≥, which includes equality, so x = −1 is itself a solution and the circle drawn at −1 is filled in; testing a value above the boundary, 4 ≥ −1 is true, and testing one below it, −5 ≥ −1 is false, so the solutions lie above −1 and the arrow runs to the right. Answer: a solid circle at −1 with the arrow pointing right. The distractors: an open circle with the arrow pointing right comes from treating ≥ as a strict >, which would shut the boundary value out; a solid circle with the arrow pointing left comes from reading the statement backwards, as if it said −1 ≥ x; an open circle with the arrow pointing left comes from making both of those mistakes at once.
- (a) £50 — Substituting x = 200 into y = 0.15x + 20 gives y = 0.15 × 200 + 20 = 30 + 20 = £50. A candidate who forgets to add the standing charge would get only 0.15 × 200 = £30. A candidate who misplaces the decimal point in the rate, using 1.5 instead of 0.15, would get 1.5 × 200 + 20 = £320. A candidate who swaps the roles of the rate and the number of units would work out 0.15 × 20 + 200 = £203.
- (c) x = 5 — Method: every point on a vertical line has the same x-coordinate however far up or down the line it lies, so the equation of a vertical line fixes x at a number and does not involve y at all. Working: of the four equations only x = 5 fixes x; it is satisfied by (5, 0), (5, 1), (5, 7) and by every other point whose x-coordinate is 5, and those points form a vertical line. Answer: x = 5. The distractors: y = 5 fixes the y-coordinate instead of the x-coordinate, which gives a horizontal line; y = 5x is a line through the origin with gradient 5, steep but not vertical, and it has a different y-value for every x; x = y fixes neither coordinate and is the line through the origin with gradient 1.
- (c) y = 4x − 5 — Parallel lines have the same gradient, so the new line has gradient 4; since it passes through (0, −5), its y-intercept is −5, giving y = 4x − 5. A candidate who drops the negative sign on the y-intercept would write y = 4x + 5. A candidate who changes the sign of the gradient, instead of keeping it the same for a parallel line, would write y = −4x − 5. A candidate who confuses m and c, using the y-intercept of the first line (3) as the gradient of the second, would write y = 3x − 5.
- (a) x = 4 or x = −3 — Method: find two numbers that multiply to give −12 and add to give −1 — these are −4 and 3. So x² − x − 12 = (x − 4)(x + 3) = 0, giving x = 4 or x = −3. Distractor origins: x = −4 or x = 3 has the signs the wrong way round; x = 4 or x = 3 makes both roots positive, ignoring the sign of −12; x = 12 or x = −1 comes from reading off the coefficient and the constant directly instead of factorising.
- (d) −2 — Method: run the machine backwards, undoing the operations in the opposite order and swapping each one for its inverse. Working: the machine added 7 last, so take 7 off the output: 1 − 7 = −6; before that the machine had multiplied by 3, so divide: −6 ÷ 3, and a negative divided by a positive stays negative. Answer: −2, which checks because 3 × (−2) + 7 = −6 + 7 = 1. The distractors: 2 comes from dividing 6 by 3 and losing the minus sign; −6 comes from taking the 7 off and stopping there, never undoing the multiplication; −18 comes from multiplying −6 by 3 instead of dividing by 3.
Build your own mix at the worksheet builder.