Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.Write down the coordinates of the point that is 4 units to the left of the origin and 7 units up.
- 2.A sequence has the position-to-term rule: the term is the position number multiplied by itself. Its first five terms are 1, 4, 9, 16, 25. Work out the 8th term.
- 3.A straight line has equation y = 4x + 3. A second line is parallel to the first line and passes through the point (0, −5). Work out the equation of the second line.y = 4x + 3
- 4.The formula for converting a distance in miles, m, to kilometres, k, is k = 8m ÷ 5. Work out k when m = 10.
- 5.A tank already contains some water and is then filled at a constant rate. After 2 minutes it contains 50 litres in total; after 7 minutes it contains 150 litres in total. Work out the rate at which water is added, in litres per minute.
- 6.Kai writes the expression 8 − 3x + 5x² and says it has three terms. Ryan says it only has two terms because a number on its own is not a term. Work out the correct number of terms in the expression.
- 7.Solve the simultaneous equations 5x − 2y = 16 and 3x + 2y = 16. Work out the value of x.
- 8.The cost, in pounds, of hiring a van for d days is given by the formula C = 25 + 18d. A customer's hire cost £133. Work out how many days, d, they hired the van for, by first rearranging the formula to make d the subject.
- 9.In a sequence, each term is half the term before it. The sequence begins 100, 50, 25. Write down the next term.
- 10.A square has sides of length y cm. Write down an expression for the perimeter of the square.
- 11.A conversion graph shows that 5 miles is equivalent to 8 kilometres. Use this to work out how many kilometres are equivalent to 20 miles.
- 12.The first four terms of a sequence are 5, 8, 11, 14. Work out an expression, in terms of n, for the nth term.
- 13.A cyclist's journey is shown on a distance–time graph. The graph is a straight line from (0 minutes, 0 km) to (40 minutes, 12 km). Work out her speed in kilometres per hour.
- 14.Solve x² − 5x + 6 = 0 by factorising.
- 15.The graph of y = x² − 5x + 6 crosses the x-axis at two points. By factorising, work out the x-coordinates of these two points.y = x² − 5x + 6
Answer key
- (c) (−4, 7) — Left of the origin means negative x, and up means positive y, so the point is (−4, 7). (4, 7) comes from forgetting that 'left' means the x-coordinate is negative. (−4, −7) comes from treating 'up' as a negative direction instead of positive. (7, −4) comes from swapping the x- and y-coordinates.
- (b) 64 — Method: a position-to-term rule is applied straight to the position number, so a term far along the sequence can be found without writing out the terms in between. Working: the rule multiplies the position by itself and the position asked for is 8, so the term is 8 × 8. Answer: 64. The distractors: 16 comes from multiplying the position by 2 instead of by itself; 81 comes from working out 9 × 9, one position too far along; 8 comes from writing down the position number itself as the term.
- (c) y = 4x − 5 — Parallel lines have the same gradient, so the new line has gradient 4; since it passes through (0, −5), its y-intercept is −5, giving y = 4x − 5. A candidate who drops the negative sign on the y-intercept would write y = 4x + 5. A candidate who changes the sign of the gradient, instead of keeping it the same for a parallel line, would write y = −4x − 5. A candidate who confuses m and c, using the y-intercept of the first line (3) as the gradient of the second, would write y = 3x − 5.
- (a) 16 — k = 8m ÷ 5 = (8 × 10) ÷ 5 = 80 ÷ 5 = 16. A candidate who multiplies 8 by 10 but forgets to divide by 5 gets 80. A candidate who divides 10 by 8 and multiplies by 5, using the fraction upside down, gets 10 × 5 ÷ 8 = 6.25. A candidate who adds instead of substituting into the formula gets 8 + 10 = 18.
- (b) 20 — The rate is the gradient: the change in litres divided by the change in time. From 2 to 7 minutes, the tank gains 150 − 50 = 100 litres over 7 − 2 = 5 minutes, so the rate is 100 ÷ 5 = 20 litres per minute. 100 comes from working out the change in litres but forgetting to divide by the change in time. 25 comes from using only the first reading, 50 ÷ 2, and ignoring the second reading entirely. 0.05 comes from dividing the change in time by the change in litres instead of the other way round, 5 ÷ 100.
- (b) 3 — Method: a term is any part of an expression separated from the rest by a + or − sign, including a number on its own. Working: 8 − 3x + 5x² splits at the + and − signs into 8, −3x and 5x² — that is three separate terms. Answer: 3. Ryan's answer of 2 comes from wrongly excluding the number 8, thinking a term must contain a letter. 5 comes from miscounting by treating the coefficients and powers as separate terms as well as the letters. 1 comes from treating the whole expression as a single term because it is written without brackets.
- (b) 4 — Adding the two equations: the y-terms, −2y and +2y, cancel, and the x-terms combine to 5x + 3x = 8x; the right-hand sides add to 16 + 16 = 32. This gives 8x = 32, so x = 4. A candidate who adds only one of the right-hand sides, instead of both, would get 8x = 16, so x = 2. A candidate who divides 32 by 4 instead of 8 would get x = 8. A candidate who subtracts the equations instead of adding them, getting 2x − 4y = 0, and then wrongly assumes y = 0, would get x = 0.
- (d) 6 — Method: rearrange the formula to make d the subject, then substitute C = 133. Working: C = 25 + 18d, so subtracting 25 from both sides gives C − 25 = 18d, then dividing by 18 gives d = (C − 25) / 18. Substituting C = 133: d = (133 − 25) / 18 = 108 / 18 = 6. The value 7.4 comes from dividing 133 by 18 without subtracting the fixed £25 first (133 / 18 ≈ 7.4). The value 4.6 comes from pairing the numbers the wrong way round, working out (133 − 18) / 25 = 4.6. The value 90 comes from subtracting both 25 and 18 from 133 instead of dividing by 18.
- (b) 12.5 — Method: apply the term-to-term rule to the term just written, and keep the exact value even when halving does not give a whole number. Working: the term before the one wanted is 25, and halving it means working out 25 ÷ 2, which is 12 with 1 left over to share, giving a half. Answer: 12.5. The distractors: 12 comes from halving 25 and then cutting the result down to a whole number; 0 comes from treating the sequence as one with a constant difference and taking 25 away from 25; 6.25 comes from halving twice and giving the term after the next one.
- (d) 4y — Method: the perimeter is the total distance round the outside of the shape, and a square has four sides all of the same length. Working: the four sides are y, y, y and y, so the perimeter is y + y + y + y, which is written as 4y. Answer: 4y. The distractors: 2y comes from adding only two of the four sides, as if the square were being treated like a rectangle with one length and one width; y² comes from working out the area of the square, y × y, instead of its perimeter; y + 4 comes from adding 4 to the side length instead of multiplying the side length by 4.
- (b) 32 km — Method: work out the scale factor connecting the two mile values: 20 miles is 4 times 5 miles (20 ÷ 5 = 4), so multiply the km value by 4 too: 8 × 4 = 32 km. Distractor origins: 24 km comes from subtracting the mile values (20 − 5 = 15), dividing by 5 to get a wrong scale factor of 3, then multiplying 8 × 3; 23 km comes from adding the difference in miles, 15, directly to the km value, 8; 16 km comes from using a scale factor of 2, doubling the km value once instead of scaling by the correct factor of 4.
- (d) 3n + 2 — The common difference is 3 (8−5=3), so the expression starts 3n. To match the first term when n=1, 3×1+c=5, so c=2: the nth term is 3n+2. A candidate who uses the first term itself as the constant, instead of first term minus the common difference, would write 3n+5 (giving 8, 11, 14, 17 — one term too high throughout). A candidate who omits the constant term altogether would write just 3n (giving 3, 6, 9, 12, not matching the sequence at all). A candidate who adds the common difference to n instead of multiplying would write n+3 (giving 4, 5, 6, 7, far too small).
- (c) 18 km/h — A straight line on a distance–time graph means a steady speed, so the speed is the distance gained divided by the time taken. First convert 40 minutes to hours: 40 ÷ 60 = 2/3 of an hour. Speed is distance ÷ time, so speed = 12 ÷ (2/3) = 12 × 3/2 = 18 km/h. The option 8 km/h comes from multiplying the distance by the time in hours instead of dividing: 12 × 2/3 = 8. The option 30 km/h comes from scaling the distance-per-minute rate by 100 instead of 60: 12 ÷ 40 = 0.3, then 0.3 × 100 = 30. The option 16 km/h comes from mistakenly treating 40 minutes as three-quarters of an hour instead of two-thirds: 12 ÷ 0.75 = 16.
- (c) x = 2 or x = 3 — Method: factorise into two brackets whose numbers multiply to the constant term and add to the coefficient of x, then set each bracket equal to zero. Working: two numbers that multiply to 6 and add to −5 are −2 and −3, so x² − 5x + 6 = (x − 2)(x − 3) = 0; then x − 2 = 0 gives x = 2 and x − 3 = 0 gives x = 3. Answer: x = 2 or x = 3. The distractors: x = −2 or x = −3 comes from reading the numbers inside the brackets as the solutions instead of changing their signs; x = 1 or x = 6 comes from taking the first factor pair of 6 without checking that the pair adds to −5; x = 5 or x = 6 comes from reading the solutions straight off the 5 and the 6 in the equation.
- (c) x = 2 and x = 3 — x² − 5x + 6 factorises as (x − 2)(x − 3), since −2 and −3 multiply to give 6 and add to give −5. The graph crosses the x-axis where each bracket equals zero: x − 2 = 0 gives x = 2, and x − 3 = 0 gives x = 3. The option x = −2 and x = −3 comes from reading the signs inside the brackets directly instead of solving x − 2 = 0 and x − 3 = 0. The option x = 2 and x = −3 mixes up the sign of only one root. The option x = −1 and x = −6 comes from picking the wrong pair of factors of 6 (1 and 6 instead of 2 and 3) and then reading their signs directly from the brackets.
Build your own mix at the worksheet builder.