Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.A box contains 6 chocolates. Write down an expression for the total number of chocolates in c boxes.
- 2.The nth term of a sequence is 2n − 1. Work out the 6th term of the sequence.
- 3.The point D has coordinates (3, −8). Write down the distance of D from the y-axis.
- 4.Solve the inequality x + 5 < 12.
- 5.The graph of y = 24/x is drawn for x > 0. Work out the value of y when x = 6.
- 6.A rule turns each input x into an output y. The inputs are x = −1, 0, 1, 2 and the matching outputs are y = 5, 3, 1, −1. Work out the rule.
- 7.A geometric sequence has first term 3 and common ratio 2. Work out the 5th term of the sequence.
- 8.Make p the subject of the formula n = p/3.
- 9.Write down the expression that means the same as 3 × y × y.
- 10.The diagram shows the graph of , together with the horizontal line . Use the graphs to estimate, to 1 decimal place, the two solutions of .
- 11.Point P has coordinates (2, −5). P is reflected in the x-axis to point Q. Write down the coordinates of Q.
- 12.The formula for the area of a trapezium is A = (a + b)h / 2, where a and b are the parallel side lengths and h is the height. Make h the subject of the formula.
- 13.Write down the number of terms in the expression 4x² − 7x + 3.
- 14.The first four terms of a sequence are 4, 9, 14, 19. Work out an expression, in terms of n, for the nth term.
- 15.Solve the inequality 5 − x ≤ 2.
Answer key
- (a) 6c — Each box has 6 chocolates, so c boxes have 6 × c = 6c chocolates. A candidate who adds the number of boxes to the number per box instead of multiplying gets 6 + c. A candidate who subtracts instead of multiplying gets c − 6. A candidate who divides instead of multiplying gets c ÷ 6.
- (a) 11 — Substitute n=6 into 2n−1: 2×6−1=11. A candidate who adds 2 and 6 and then subtracts 1, instead of multiplying 2 by 6 first, would compute 2+6−1=7. A candidate who substitutes the wrong term number, n=5, would reach 2×5−1=9. A candidate who forgets to subtract 1 would compute just 2×6=12.
- (b) 3 — Distance from the y-axis is given by the size of the x-coordinate, which is 3. 8 comes from using the size of the y-coordinate instead of the x-coordinate. −8 comes from using the y-coordinate and keeping its negative sign, but a distance is never negative. 11 comes from adding the sizes of both coordinates, 3 + 8, instead of using the x-coordinate alone.
- (a) x < 7 — Subtract 5 from both sides: x < 12 − 5, so x < 7. A candidate who adds 5 instead of subtracting gets x < 17. A candidate who subtracts the wrong way round gets x < −7. A candidate who correctly finds 7 but wrongly flips the inequality (as if dividing by a negative had happened) writes x > 7.
- (d) y = 4 — Method: substitute x = 6 into y = 24/x: y = 24 ÷ 6 = 4. Distractor origins: y = 18 subtracts instead of dividing (24 − 6 = 18); y = 144 multiplies instead of dividing (24 × 6 = 144); y = 30 adds instead of dividing (24 + 6 = 30).
- (a) y = −2x + 3 — Method: find the step in the outputs for each step of 1 in the input — falling outputs mean a negative multiplier — then read off the output when the input is 0, because that is the number added on. Working: the outputs 5, 3, 1, −1 fall by 2 each time x rises by 1, so x is multiplied by −2; the output at x = 0 is 3, so 3 is added. Answer: y = −2x + 3, checked at x = 2 by −2 × 2 + 3 = −1. The distractors: y = 2x + 3 comes from taking the size of the step, 2, as the multiplier and ignoring the fact that the outputs are falling; y = −2x − 3 comes from using the correct multiplier but writing the number added on as −3 instead of the output 3 listed at x = 0; y = −x + 4 comes from taking the multiplier as −1, its size read from the step of 1 in the inputs instead of the step of 2 in the outputs and its sign from the fact that the outputs fall, and then fitting the number added on to the pair x = −1, y = 5.
- (d) 48 — Each term is found by multiplying the previous term by the common ratio, 2: 3, 6, 12, 24, 48 — the 5th term is 48. A candidate who mistakes the common ratio for a common difference, and adds 2 four times, would reach 3+4×2=11. A candidate who works out the multiplier 2⁴=16 but forgets to multiply it by the first term would give 16. A candidate who multiplies one time too many (finding the 6th term instead of the 5th) would reach 3×2⁵=96.
- (b) p = 3n — n = p/3 means p has been divided by 3, so to make p the subject, multiply both sides by 3: p = 3n. Writing p = n/3 leaves the formula exactly as it was, without undoing the division. Writing p = n − 3 mistakes division for subtraction and takes 3 away from n instead of multiplying. Writing p = 3/n incorrectly flips the fraction upside down rather than multiplying n by 3. The correct rearrangement is p = 3n.
- (a) 3y² — There is one 3 in the product and the letter y appears twice. A number that multiplies a letter is written in front of it as the coefficient, so the 3 goes at the front. The two ys multiply each other, so the letter carries an index of 2. The shortest correct way of writing the product is therefore 3y². Note that (3y)² would mean 3 × y × 3 × y, which squares the coefficient as well, while 3 + y² turns a multiplication into an addition and y³ treats the coefficient as a third factor of y.
- (a) x = −1.8 and x = 2.8 — Method: the solutions of x² − x − 2 = 3 are the x-coordinates of the points where the curve y = x² − x − 2 meets the line y = 3, read off the grid to 1 decimal place. Working: the curve meets the line y = 3 at approximately x = −1.8 and at x = 2.8. Answer: x ≈ −1.8 and x ≈ 2.8. Distractor refutation: x = −1.0 and x = 2.0 comes from reading where the curve crosses the x-axis (y = 0), solving x² − x − 2 = 0, instead of where it meets the line y = 3. x = −3.0 and x = 4.0 comes from taking the two ends of the drawn curve as the intersection points, instead of finding where it actually crosses the line y = 3. x = 1.8 and x = 2.8 comes from a sign slip on the left-hand intersection, reading it as positive instead of negative.
- (c) (2, 5) — Reflecting in the x-axis keeps the x-coordinate the same and changes the sign of the y-coordinate: Q = (2, 5). (−2, −5) comes from reflecting in the y-axis instead, which changes the sign of the x-coordinate. (−2, 5) comes from reflecting in both axes. (2, −5) comes from not applying the reflection at all.
- (d) h = 2A / (a + b) — Method: undo the multiplication by 1/2 by multiplying both sides by 2, then undo the multiplication by (a + b) by dividing both sides by it. Working: A = (a + b)h / 2, so multiplying both sides by 2 gives 2A = (a + b)h, then dividing both sides by (a + b) gives h = 2A / (a + b). The value h = A / (a + b) comes from forgetting to multiply by 2 to clear the 1/2 first. The value h = 2A / a + b comes from dividing only by a and leaving b outside the fraction, instead of dividing by the whole bracket (a + b). The value h = (a + b) / (2A) comes from inverting the fraction.
- (d) 3 — The expression has three terms separated by + and − signs: 4x², −7x and 3. A candidate who thinks a number on its own does not count as a term says there are 2 terms, missing the 3. A candidate who miscounts the minus sign as creating an extra term says there are 4. A candidate who splits each term into its coefficient and letter part separately (4, x², 7, x, 3) says there are 5.
- (d) 5n − 1 — The common difference is 5 (9−4=5), so the expression starts 5n. To match the first term when n=1, 5×1+c=4, so c=−1: the nth term is 5n−1. A candidate who uses the first term itself as the constant, instead of first term minus the common difference, would write 5n+4 (giving 9, 14, 19, 24 — one term too high throughout). A candidate who omits the constant term altogether would write just 5n (giving 5, 10, 15, 20, not matching the sequence). A candidate who adds the common difference to n instead of multiplying would write n+5 (giving 6, 7, 8, 9, far too small).
- (c) x ≥ 3 — Method: collect the number terms first; the x term is negative, so the final step multiplies both sides by −1, and that is the one step that turns the inequality sign round. Working: subtracting 5 from both sides of 5 − x ≤ 2 gives −x ≤ −3; multiplying both sides by −1 turns −x into x and −3 into 3, and because the multiplier is negative the ≤ becomes ≥, so x ≥ 3. Answer: x ≥ 3. The distractors: x ≤ 3 comes from multiplying by −1 without turning the sign round, the commonest slip on this type; x ≤ −3 comes from reading −x ≤ −3 as though the minus sign could simply be rubbed off the left-hand side; x ≥ −3 comes from turning the sign round correctly but leaving the right-hand side at −3 instead of multiplying it by −1 as well.
Build your own mix at the worksheet builder.