Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.A wall is tiled in rows, and every row uses the same number of tiles. One row uses 10 tiles, two rows use 20 tiles and three rows use 30 tiles. Work out how many tiles are needed for 7 rows.
- 2.The height, h metres, of a ball t seconds after a stopwatch is started follows h = (t − 1)(5 − t) for 1 ≤ t ≤ 5, where h = 0 means the ball is at ground level. Work out the two times at which the ball is at ground level.
- 3.A number machine multiplies its input by 5. Work out the output when the input is −1.
- 4.Yusuf has £40 saved and adds £6 each week. His sister Aisha has £10 saved and adds £11 each week. After how many weeks will they have saved the same amount?
- 5.Ben writes n + 4 ≤ 9. Which statement describes what Ben has written? Give a reason for your answer.
- 6.Solve 4x + 3 = 19
- 7.Solve the simultaneous equations x + y = 1 and 2x + y = 5.
- 8.The point A lies on the x-axis. Which statement about A must be true?
- 9.Which expression is equivalent to 2(x + 6)?
- 10.The solution set of an inequality is x ≥ 7. Write down the value that does NOT satisfy this inequality.
- 11.Make x the subject of the formula y = 2x − 9.y = 2x − 9
- 12.The first five terms of a quadratic sequence are 2, 5, 10, 17, 26. Work out the next term in the sequence.
- 13.Expand and simplify 2(a + 6) − 2(a − 7)
- 14.y = 5 − 2x. Work out the value of x when y = 11.
- 15.The first four terms of a sequence are 4, 6, 8, 10. Work out an expression, in terms of n, for the nth term.
Answer key
- (c) 70 — Method: the numbers of tiles form a sequence in which the same amount is added for each extra row, so the total for a number of rows is that amount multiplied by the number of rows. Working: 20 − 10 = 10 and 30 − 20 = 10, so each row adds 10 tiles; 7 rows therefore need 7 lots of 10, that is 7 × 10. Answer: 70. The distractors: 80 comes from counting one row too many and giving the total for 8 rows; 17 comes from adding the 10 tiles to the 7 rows instead of multiplying; 10 comes from giving the number of tiles in a single row rather than the total for all the rows.
- (c) t = 1 second and t = 5 seconds — The ball is at ground level when h = 0, which happens when either bracket is zero. t − 1 = 0 gives t = 1, and 5 − t = 0 gives t = 5. The option with t = −1 makes a sign error solving the first bracket. The option with t = −5 makes a sign error solving the second bracket, treating 5 − t = 0 as if it gave a negative solution. The option with t = 4 seconds is an arithmetic slip in solving 5 − t = 0.
- (a) −5 — Method: apply the machine's operation to the input, and carry the sign of the input through the multiplication. Working: the machine gives 5 × (−1); a positive number multiplied by a negative number gives a negative result, and 5 × 1 = 5, so the output is 5 below zero. Answer: −5, which is one lot of −1 taken five times. The distractors: 5 comes from working out 5 × 1 and losing the minus sign of the input; 4 comes from adding 5 to −1 instead of multiplying; −6 comes from subtracting 5 from −1 instead of multiplying.
- (d) 6 — Method: write an expression for each person's savings after w weeks, and set them equal. Working: 40 + 6w = 10 + 11w. Subtract 6w from both sides: 40 = 10 + 5w. Subtract 10: 30 = 5w, so w = 6. Answer: 6 weeks. 0 comes from setting only the weekly amounts equal, 6w = 11w, and ignoring the different starting amounts entirely. 10 comes from adding the two starting amounts and dividing by the difference in weekly amounts, (40 + 10) ÷ (11 − 6), instead of forming and solving the correct equation. 1.76 comes from adding the two weekly amounts instead of subtracting them when rearranging, (40 − 10) ÷ (11 + 6).
- (d) An inequality, because ≤ compares the two sides — The symbol ≤ means 'is less than or equal to', so the statement compares the sizes of the two sides instead of saying they are equal: that makes it an inequality. Solving it gives n ≤ 5, a whole range of values rather than the single value an equation would give. An identity has to be true for every value of the letter, and this fails at n = 6, so it is not one. A formula works one quantity out from another, and there is only one letter here.
- (c) 4 — Method: subtract 3 from both sides, then divide by 4. Working: 4x = 19 − 3 = 16, so x = 16 ÷ 4 = 4. Answer: 4. 4.75 comes from dividing 19 by 4 directly, without subtracting 3 first. 3.75 comes from subtracting 4 instead of 3 before dividing. 5.5 comes from a sign error, adding 3 to 19 instead of subtracting it.
- (a) x = 4, y = −3 — Method: both equations contain +y with the same coefficient, so subtracting one equation from the other removes y. Working: (2x + y) − (x + y) = 5 − 1 gives x = 4; substituting x = 4 into x + y = 1 gives 4 + y = 1, so y = −3. Answer: x = 4, y = −3, which also satisfies 8 − 3 = 5. The distractors: x = 4, y = 5 comes from rearranging x + y = 1 as y = 1 + x; x = −2, y = 3 comes from eliminating x by doubling the first equation and then reading −y = 3 as y = 3; x = 6, y = −5 comes from adding the constants instead of subtracting them while eliminating y, taking x as 5 + 1.
- (a) y = 0 — Method: in the pair (x, y) the first coordinate measures how far left or right of the origin a point is and the second how far above or below the x-axis it is, so a point on an axis has one of those measurements equal to zero. Working: the x-axis is the horizontal line through the origin, so a point sitting on it is neither above nor below that line and its second coordinate is zero, while its first coordinate may be positive, negative or zero. Answer: y = 0. The distractors: x = 0 is the condition for lying on the y-axis, the other axis; x > 0 comes from assuming a point on the x-axis must be to the right of the origin, which is true only of part of that axis; x = y holds only at the origin, which is one point of the x-axis rather than a property shared by all of them.
- (c) 2x + 12 — Multiply every term inside the bracket by 2: 2 × x = 2x and 2 × 6 = 12, so 2(x + 6) = 2x + 12. Writing 2x + 6 comes from multiplying only the x-term and leaving the 6 unchanged. Writing x + 12 comes from multiplying only the 6 and leaving the x unchanged. Writing 2x + 8 comes from adding 2 and 6 instead of multiplying them.
- (d) 6 — Method: a value satisfies x ≥ 7 when it is greater than 7 or exactly equal to 7, so test each value against the boundary. Working: 8 is greater than 7 and 100 is greater than 7, so both satisfy the inequality; 7 is equal to the boundary and ≥ includes equality, so 7 satisfies it as well; 6 is less than 7, so 6 is the one value that fails. Answer: 6. The distractors: 7 is chosen by candidates who read ≥ as a strict 'greater than' and so shut the boundary value out of the solution set; 8 is chosen by reading the question as asking which value DOES satisfy the inequality and taking the smallest such value; 100 is chosen by the same misreading, taking instead the value furthest above the boundary.
- (a) x = (y + 9) / 2 — Method: undo the subtraction of 9 first, then undo the multiplication by 2. Working: y = 2x − 9, so adding 9 to both sides gives y + 9 = 2x, then dividing both sides by 2 gives x = (y + 9) / 2. The value x = (y − 9) / 2 comes from a sign error, keeping the −9 instead of moving it to +9. The value x = 2(y + 9) comes from multiplying by 2 instead of dividing. The value x = y / 2 + 9 comes from dividing by 2 before adding 9, the wrong order of operations, instead of dividing the whole bracket.
- (c) 37 — The first differences are 3, 5, 7, 9 — they increase by 2 each time (the second difference), so the next first difference is 11, giving 26+11=37. A candidate who repeats the last first difference (9) instead of increasing it would reach 26+9=35. A candidate who increases the difference by 4 instead of 2 would reach 26+13=39. A candidate who adds only the second difference (2) to the last term, instead of the next first difference, would reach 26+2=28.
- (d) 26 — Method: expand both brackets, treating the second as multiplication by −2 so that both of its terms change sign, then collect like terms. Working: 2(a + 6) = 2a + 12 and −2(a − 7) = −2a + 14, so the expression becomes 2a + 12 − 2a + 14; the a terms give 2a − 2a = 0, so no term in a survives, and the numbers give 12 + 14 = 26. Answer: 26. The distractors: −2 comes from expanding the second bracket as −2a − 14, so that the numbers give 12 − 14; 4a − 2 comes from adding 2(a − 7) instead of subtracting it, giving 2a + 12 + 2a − 14; 13 comes from multiplying the 2 over only the first term of each bracket, giving 2a + 6 − 2a + 7.
- (d) −3 — Substitute y = 11 into y = 5 − 2x, giving 11 = 5 − 2x. Subtracting 5 from both sides gives 6 = −2x, so x = 6 ÷ (−2) = −3. A candidate who mishandles the negative sign when rearranging, treating the equation as 6 = 2x, gets x = 3. A candidate who correctly finds −2x = 6 but forgets to divide by 2 at all gets x = 6. A candidate who adds 5 and 11 instead of subtracting, getting 2x = 16, gets x = 8.
- (c) 2n + 2 — Method: find the common difference between consecutive terms, then find the constant that fits the first term. Working: 6 − 4 = 2, 8 − 6 = 2, 10 − 8 = 2, so the terms increase by 2 each time and the nth term has the form 2n + c. Substituting n = 1: 2(1) + c = 4, so c = 2. Answer: the nth term is 2n + 2. The value 2n comes from using only the common difference and leaving out the constant c entirely. The value 2n + 4 comes from using the first term itself as c, without subtracting the common difference to find the true constant. The value 2n − 2 comes from a sign error when working out c, giving −2 instead of +2.
Build your own mix at the worksheet builder.