Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.a = 2 and b = 5. Work out the value of ab².
- 2.The diagram shows part of the graph of a reciprocal function of the form , passing through the labelled point. Work out the value of k.
- 3.The diagram shows the graph of a quadratic function. Which equation could it represent?
- 4.Which of these rules generates the sequence 6, 11, 16, 21, …?
- 5.x = 5. Work out the value of 3x² − 4.
- 6.Explain why the equation 4x + 3 = 4x + 10 has no solution for x.
- 7.A graph has equation y = 3x + 2. Which word or phrase best describes its shape?y = 3x + 2
- 8.A geometric sequence starts at 3, and each term after that is found by multiplying the term before it by 2. Write down the first four terms.
- 9.Rosie is asked whether 4(x + 3) = 4x + 12 is an equation or an identity. Which statement is correct? Give a reason for your answer.
- 10.Solve the inequality 3x + 6 ≤ 0.
- 11.A number machine multiplies its input by 5. Work out the output when the input is −1.
- 12.The simultaneous equations y = 3 and 4x − y = 9 are given. Work out the value of x.
- 13.The graph of P = 480 ÷ V shows how the pressure, P pascals, of a gas depends on its volume, V cm³, at constant temperature. Use the relationship to work out the volume when the pressure is 32 pascals, and then work out by how much the volume increases when the pressure drops to 24 pascals.
- 14.A quadratic graph has equation y = (x − 4)². A student says this graph crosses the x-axis at two different points. Explain why the student is wrong.
- 15.Work out the value of 3x² − 4x when x = −2.
Answer key
- (a) 50 — Method: in ab², only the b is squared, so square b first, then multiply by a. Working: b² = 5² = 25, then a × b² = 2 × 25 = 50. Answer: 50. 100 comes from squaring the product ab instead of just b: (2 × 5)² = 100. 20 comes from squaring a instead of b: a² × b = 4 × 5 = 20. 10 comes from ignoring the square altogether and working out a × b = 2 × 5 = 10.
- (b) 6 — Method: for any point that lies on y = k/x, the value of k is found by multiplying the x-coordinate and the y-coordinate together, since k = x × y. Working: k = 2 × 3 = 6. Answer: k = 6. Distractor refutation: 1.5 comes from dividing the y-coordinate by the x-coordinate instead of multiplying them. 5 comes from adding the two coordinates instead of multiplying them. 9 comes from misreading the point's x-coordinate as 3 instead of 2, then multiplying 3 × 3.
- (d) $y = x^2 - 2x - 3$ — Method: read the two x-intercepts (roots) from the graph, write the quadratic as the product of the corresponding factors, then expand. Working: the curve crosses the x-axis at x = −1 and x = 3, so the equation factorises as (x + 1)(x − 3), which expands to x² − 2x − 3. Answer: y = x² − 2x − 3. Distractor refutation: y = x² − x − 6 comes from misreading the left-hand crossing point as x = −2 instead of x = −1, giving factors (x + 2)(x − 3). y = x² − x − 2 comes from misreading the right-hand crossing point as x = 2 instead of x = 3, giving factors (x + 1)(x − 2). y = x² + 2x − 3 comes from writing the factors as (x − 1)(x + 3), swapping which root gets the plus sign and which gets the minus sign, giving the wrong sign on the x term.
- (c) 5n + 1 — Method: find the common difference, then use it as the coefficient of n in the position-to-term rule, and find the constant by checking against the first term. Working: the common difference is 5, so the rule has the form 5n + c. Using the 1st term: 5(1) + c = 6, so c = 1. The rule is 5n + 1. Answer: 5n + 1. 5n − 1 uses the correct coefficient but the wrong sign for the constant. 6n comes from using the first term as the coefficient of n instead of the common difference — it matches the 1st term by coincidence but fails from the 2nd term onward. n + 5 swaps the coefficient and the constant around, using the common difference as the constant instead of the coefficient of n.
- (c) 71 — Method: square x first, then multiply by 3, then subtract 4, following the order of operations. Working: x² = 5² = 25; 3 × 25 = 75; 75 − 4 = 71. Answer: 71. 221 comes from squaring (3x) as a whole first: (3 × 5)² = 225, then − 4 = 221, squaring the coefficient along with x. 75 comes from correctly working out 3x² but forgetting to subtract the 4. 3 comes from subtracting the 4 from x before squaring: (5 − 4)² × 3 = 3, doing the operations in the wrong order.
- (a) Subtracting 4x gives 3 = 10, which is never true. — Method: try to solve the equation as normal and see what happens. Working: subtract 4x from both sides: 4x + 3 − 4x = 4x + 10 − 4x, giving 3 = 10. This statement is false for every value of x, so the equation has no solution. Answer: subtracting 4x gives 3 = 10, which is never true. "x would have to be negative" invents a constraint on x that the equation never states. "It's true for every x" confuses this equation with an identity, where both sides would simplify to the same expression. "x = 7" misreads the false statement 3 = 10 as something to solve for x, rather than recognising it means no solution exists.
- (b) A straight line. — y = 3x + 2 is a linear function, since the highest power of x is 1, so its graph is a straight line with gradient 3 and y-intercept 2. Saying it is a U-shaped curve confuses a linear graph with a quadratic graph, which has an x² term. Saying it decreases then increases describes a curve with a turning point, which a straight line does not have. Saying it gets closer to an axis but never reaches it describes a reciprocal graph, y = k/x, not a linear one.
- (d) 3, 6, 12, 24 — Method: a term-to-term rule is applied to the term just written, so start with the first term and use the rule three more times. Working: the first term is 3; 3 × 2 = 6 is the second; 6 × 2 = 12 is the third; 12 × 2 = 24 is the fourth. Answer: 3, 6, 12, 24. The distractors: 3, 5, 7, 9 comes from adding 2 each time instead of multiplying by 2; 3, 9, 27, 81 comes from multiplying by the first term, 3, instead of by the multiplier 2 the rule gives; 6, 12, 24, 48 comes from doubling before writing anything down, so the list starts one term too late and the given first term is missing.
- (a) An identity, because it is true for every value of x — Expanding the brackets multiplies both terms inside by 4, giving 4x + 12, which is exactly the right-hand side. The two sides are therefore equal whatever x is, and a statement true for every value of the letter is an identity. An equation is true only for particular values, and trying to solve this one leads to 0 = 0, which places no restriction on x at all. Being able to expand brackets is not what makes a statement an identity, since any equation with brackets can be expanded. Nor is it a formula: a formula links two different quantities, and only one letter appears here.
- (b) x ≤ −2 — Method: take the number term off both sides, then divide by the coefficient of x; the sign turns round only when you divide BY a negative number, and here you divide by 3. Working: subtracting 6 from both sides of 3x + 6 ≤ 0 gives 3x ≤ −6; dividing both sides by 3, which is positive, gives x ≤ −2. Answer: x ≤ −2. The distractors: x ≥ −2 comes from turning the sign round because the right-hand side has become negative, which is not the rule; it is the sign of the divisor that matters; x ≤ 2 comes from moving the 6 across without changing its sign, giving 3x ≤ 6; x ≤ −18 comes from multiplying both sides by 3 instead of dividing by it.
- (a) −5 — Method: apply the machine's operation to the input, and carry the sign of the input through the multiplication. Working: the machine gives 5 × (−1); a positive number multiplied by a negative number gives a negative result, and 5 × 1 = 5, so the output is 5 below zero. Answer: −5, which is one lot of −1 taken five times. The distractors: 5 comes from working out 5 × 1 and losing the minus sign of the input; 4 comes from adding 5 to −1 instead of multiplying; −6 comes from subtracting 5 from −1 instead of multiplying.
- (c) 3 — Substituting y = 3 into 4x − y = 9 gives 4x − 3 = 9, so 4x = 12, and x = 3. A candidate who adds 3 instead of subtracting it, making a sign error when substituting, would get 4x + 3 = 9, so 4x = 6 and x = 1.5. A candidate who forgets to divide by 4 after finding 4x = 12 would write x = 12. A candidate who subtracts 4 instead of dividing by it would get 12 − 4 = 8.
- (b) 5 cm³ — When P = 32, V = 480 ÷ 32 = 15 cm³. When P = 24, V = 480 ÷ 24 = 20 cm³. The increase in volume is 20 − 15 = 5 cm³. Giving only the second volume, 20 cm³, forgets to subtract the first volume. Giving only the first volume, 15 cm³, answers the wrong part of the question. Subtracting the two pressures instead of the two volumes, 32 − 24 = 8, mixes up which quantity the question asks for.
- (a) It touches the x-axis once, only at x = 4. — (x − 4)² is a square, so it equals zero only when x − 4 = 0, that is at x = 4 — the curve just touches the x-axis there rather than crossing it, since a square cannot be negative on either side to cross through. Saying it crosses at x = 4 and x = −4 wrongly introduces a plus-or-minus, as if taking a square root of x, rather than recognising the bracket is already squared and only zero once. Saying it never touches the x-axis forgets that a squared term CAN equal zero, even though it can never be negative. Saying it crosses at x = 2 and x = −2 confuses (x − 4)² with the different expression x² − 4.
- (b) 20 — 3x² − 4x = 3(−2)² − 4(−2) = 3(4) − (−8) = 12 + 8 = 20. A candidate who makes a sign error on −4x, treating −4 × −2 as −8 instead of +8, gets 12 − 8 = 4. A candidate who squares −2 but keeps the result negative, using 3 × (−4) = −12 for the first term, but correctly works out −4x = −4 × (−2) = 8, gets −12 + 8 = −4. A candidate who squares the whole term 3x, working out (3 × −2)² − 4 × (−2), gets (−6)² + 8 = 36 + 8 = 44.
Build your own mix at the worksheet builder.