Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.A taxi charges a fixed fee of £3 plus £2 for every mile travelled. The journey is m miles. Write down an expression for the total cost, in pounds.
- 2.Work out the value of 3b − 4 when b = 6
- 3.Solve the inequality x − 10 < −3.
- 4.The first four terms of a sequence are 4, 6, 8, 10. Work out an expression, in terms of n, for the nth term.
- 5.A plumber charges a call-out fee plus an hourly rate for a job. The total cost, £C, for a job lasting h hours is given by the formula C = 40 + 25h. What does the number 40 represent in this formula?
- 6.In a sequence, each term is half the term before it. The sequence begins 100, 50, 25. Write down the next term.
- 7.A table shows y = x² − 6x + 5 at these points (x, y): (0, 5), (1, 0), (2, −3), (3, −4), (4, −3), (5, 0), (6, 5). Using the symmetry shown, write down the x-coordinate of the turning point.y = x² − 6x + 5
- 8.A geometric sequence begins 162, 54, 18, 6, ... Work out the next term in the sequence.
- 9.Make x the subject of the formula y = 4(x − 6).
- 10.A company's profit was £2000 in its first year. Each following year, the profit increases by £800. Work out the first year in which the profit is more than £7000.
- 11.A sequence has the position-to-term rule: the nth term is 3n. Write down the first four terms of the sequence.
- 12.The point B has coordinates (−2, −2). In which quadrant is B?
- 13.Which of these is a term, rather than a whole expression, an equation, or a formula?
- 14.Which expression means 'triple c, then add double d'?
- 15.Expand 4(2x − 3).
Answer key
- (b) 3 + 2m — Method: add the fixed fee to the cost of the miles travelled. Working: the miles cost 2 × m = 2m pounds, and the fixed fee is £3, so the total is 3 + 2m. Answer: 3 + 2m. 2 + 3m comes from swapping which number is the fixed fee and which is the per-mile rate. 5 + m comes from adding the fixed fee and the rate together into one number, 3 + 2 = 5, before adding the miles, instead of multiplying the rate by the number of miles. 5m comes from multiplying that combined total by the miles, treating the whole £5 as if it were a per-mile rate.
- (c) 14 — Substitute b = 6 into 3b − 4: 3 × 6 − 4 = 18 − 4 = 14. 5 comes from treating 3b as 3 + b instead of 3 × b, giving 3 + 6 − 4. 6 comes from subtracting 4 from b before multiplying by 3, 3 × (6 − 4). 18 comes from working out 3 × 6 correctly but forgetting to subtract the 4.
- (d) x < 7 — Method: add 10 to both sides to leave x on its own; adding the same number to both sides never changes the direction of an inequality. Working: adding 10 to both sides of x − 10 < −3 leaves x on the left and −3 + 10 on the right, and −3 + 10 = 7, so x < 7. Answer: x < 7. The distractors: x > 7 comes from turning the sign round while adding, as though every move flipped it; x < −13 comes from subtracting 10 from both sides instead of adding it, giving −3 take away 10; x < 13 comes from ignoring the minus sign on −3 and working out 3 + 10 instead.
- (c) 2n + 2 — Method: find the common difference between consecutive terms, then find the constant that fits the first term. Working: 6 − 4 = 2, 8 − 6 = 2, 10 − 8 = 2, so the terms increase by 2 each time and the nth term has the form 2n + c. Substituting n = 1: 2(1) + c = 4, so c = 2. Answer: the nth term is 2n + 2. The value 2n comes from using only the common difference and leaving out the constant c entirely. The value 2n + 4 comes from using the first term itself as c, without subtracting the common difference to find the true constant. The value 2n − 2 comes from a sign error when working out c, giving −2 instead of +2.
- (d) The fixed call-out fee, charged before the hourly rate. — Method: compare the formula with C = (fixed charge) + (rate) × h, where the fixed charge is the part that does not depend on h. Working: in C = 40 + 25h, the term 25h depends on the number of hours, h, but 40 does not change however many hours the job takes. Answer: 40 is the fixed call-out fee. 'The hourly rate' confuses the fixed term with the coefficient of h, which is actually 25. 'The total cost for a job lasting 1 hour' comes from substituting h = 1 into the formula (40 + 25 = 65) rather than reading off the constant term. 'The number of hours worked before charging starts' wrongly treats the constant, which is in pounds, as if it were measured in hours.
- (b) 12.5 — Method: apply the term-to-term rule to the term just written, and keep the exact value even when halving does not give a whole number. Working: the term before the one wanted is 25, and halving it means working out 25 ÷ 2, which is 12 with 1 left over to share, giving a half. Answer: 12.5. The distractors: 12 comes from halving 25 and then cutting the result down to a whole number; 0 comes from treating the sequence as one with a constant difference and taking 25 away from 25; 6.25 comes from halving twice and giving the term after the next one.
- (d) x = 3 — The table is symmetrical about the turning point: y = 0 at both x = 1 and x = 5, and the lowest value, y = −4, occurs exactly halfway between them, at x = 3. Choosing x = 5 picks one of the roots rather than the midpoint between them. Choosing x = 1 picks the other root for the same reason. Choosing x = 6 picks the x-value where y returns to its starting value of 5, which is not the turning point.
- (a) 2 — The common ratio is 54 ÷ 162 = 1/3, confirmed by 18 ÷ 54 = 1/3 and 6 ÷ 18 = 1/3. The next term is 6 × 1/3 = 2. A candidate who wrongly treats the sequence as arithmetic and subtracts the last difference (18 − 6 = 12) again gets 6 − 12 = −6. A candidate who multiplies by 3 instead of dividing, effectively reversing the sequence, gets 18. A candidate who guesses the ratio is 1/2 gets 6 × 1/2 = 3.
- (c) x = (y + 24)/4 — Method: expand the bracket first, then undo the operations done to x in reverse order. Working: y = 4(x − 6) = 4x − 24, so y + 24 = 4x, so x = (y + 24)/4. Answer: x = (y + 24)/4. x = (y + 6)/4 comes from expanding the bracket incorrectly, treating 4(x − 6) as 4x − 6 instead of 4x − 24. x = 4y + 96 comes from multiplying by 4 instead of dividing by 4 to undo the multiplication, giving 4(y + 24) = 4y + 96. x = y/4 − 6 comes from dividing by 4 first without expanding the bracket, then subtracting 6 as if the bracket's operation still applied afterwards.
- (d) 8 — Method: write the nth term of the sequence, 2000 + 800(n − 1), and find the smallest whole n for which it is greater than 7000. Working: 2000 + 800(n − 1) > 7000, so 800(n − 1) > 5000, giving n − 1 > 6.25. Since n − 1 must be a whole number, the smallest value is 7, so n = 8. Check: year 8's total is 2000 + 800 × 7 = 7600, which is more than £7000, while year 7's total is 2000 + 800 × 6 = 6800, which is not. Answer: year 8. 7 comes from rounding 6.25 to the nearest whole number, 6, and then adding 1, instead of rounding up to the next whole number before adding 1. 6 comes from using 6.25 rounded down to 6 as the year number directly, without adding the 1 needed to convert from the number of increases to the year number. 9 comes from adding one extra year beyond the year that already satisfies the condition.
- (b) 3, 6, 9, 12 — Method: substitute the positions n = 1, 2, 3 and 4 into the rule in turn, because a position-to-term rule gives each term from its own position number. Working: 3 × 1 = 3, 3 × 2 = 6, 3 × 3 = 9 and 3 × 4 = 12. Answer: 3, 6, 9, 12. The distractors: 3, 9, 27, 81 comes from reading 3n as 3 multiplied by itself n times and so multiplying by 3 at every step; 0, 3, 6, 9 comes from starting the count at n = 0, which shifts every term one place; 4, 5, 6, 7 comes from reading 3n as n + 3 and adding 3 to each position number instead of multiplying by 3.
- (d) the third quadrant — Method: only the signs of the coordinates matter, so two coordinates equal in size still have to be read separately, one for each axis. Working: both coordinates of (−2, −2) are negative, so B lies to the left of the y-axis and below the x-axis; counting anticlockwise from the region where both coordinates are positive, left and below is the third region. Answer: the third quadrant. The distractors: 'the first quadrant' comes from ignoring both minus signs and treating the point as (2, 2); 'the second quadrant' comes from applying the minus sign to the x-coordinate only, as though the point were (−2, 2); 'the fourth quadrant' comes from applying it to the y-coordinate only, as though the point were (2, −2).
- (d) 5x² — 5x² is a single term: a product of a number and a power of a letter, with no + or − sign attached to anything else. A candidate who picks 5x² + 3x is choosing the expression that contains that term, rather than the term on its own. A candidate who picks 5x² = 20 is drawn in by the equals sign and misses that this makes it an equation. A candidate who picks A = 5x² thinks any statement with a letter and a number combined must be a formula.
- (c) 3c + 2d — Method: 'triple c' is 3c, 'double d' is 2d, and 'add' joins the two separate terms with a plus sign. Working: 3c + 2d. Answer: 3c + 2d. 2c + 3d comes from swapping which letter gets tripled and which gets doubled. 6cd comes from multiplying the two terms together instead of adding them, and also multiplying the coefficients (3 × 2 = 6). 5(c + d) comes from adding the coefficients (3 + 2 = 5) and applying that single number to both letters together, as if c and d always came as a pair.
- (c) 8x − 12 — Multiply each term inside the bracket by 4: 4 × 2x = 8x and 4 × (−3) = −12, so 4(2x − 3) = 8x − 12. A candidate who forgets to multiply the second term by 4 gets 8x − 3. A candidate who makes a sign error, treating 4 × (−3) as +12, gets 8x + 12. A candidate who adds 4 to the bracket instead of multiplying gets 2x + 1.
Build your own mix at the worksheet builder.