Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.Write down the expression that means the same as (x + 7) ÷ 4.
- 2.Make x the subject of the formula y = x + 7.y = x + 7
- 3.A sequence begins at 60, and each term after that is found by subtracting 7 from the term before it. Work out the 5th term of the sequence.
- 4.Solve the inequality 6.3x + 1.8 ≤ 40. Hence write down the greatest number with exactly one decimal place that satisfies the inequality.
- 5.Write down the number of terms in the expression 4x² − 7x + 3.
- 6.The first four terms of a sequence are 18, 15, 12, 9. Work out an expression, in terms of n, for the nth term.
- 7.Work out the value of 5y + 9 when y = 0
- 8.A stack of firewood has 3 logs in the top layer. Each layer below has 4 more logs than the layer above it. Work out the number of logs in the 6th layer from the top.
- 9.Solve 2x − 2 = 2
- 10.A quadratic curve has a minimum turning point at (3, −4). Which of these statements about the curve must be true?
- 11.A cyclist's journey is shown on a distance–time graph. The graph is a straight line from (0 minutes, 0 km) to (40 minutes, 12 km). Work out her speed in kilometres per hour.
- 12.A student says that 5(x + 2) is equivalent to 5x + 2. Which statement explains why the student is wrong?
- 13.Factorise fully 5x + 5y − 5
- 14.The point P has coordinates (0, 12). Write down the axis that P lies on and the y-coordinate of P.
- 15.A sequence has the position-to-term rule: the term is the square of the position number. Its first four terms are 1, 4, 9, 16. Work out the 10th term.
Answer key
- (c) (x + 7)/4 — Method: dividing an expression by a number is written as a fraction, with the whole expression on top. Working: (x + 7) ÷ 4 = (x + 7)/4. Answer: (x + 7)/4. 4/(x + 7) comes from writing the numbers the wrong way round, putting 4 on top. 4(x + 7) comes from reading ÷ as ×, multiplying instead of dividing. (x + 7) − 4 comes from reading ÷ as −, subtracting instead of dividing.
- (b) x = y − 7 — The letter x has 7 added to it, and the inverse of adding 7 is subtracting 7. Subtracting 7 from both sides leaves x on its own on the right, giving y − 7 = x, which is written x = y − 7. Adding 7 to both sides instead repeats the operation rather than undoing it; writing 7 − y reverses the subtraction, which changes the sign of the whole expression; writing 7y treats the addition as a multiplication.
- (c) 32 — The terms are 60, 53, 46, 39, 32 — each found by subtracting 7 from the term before, so the 5th term is 32. Subtracting 7 five times from the first term instead of four times, 60 − 7 × 5 = 25, treats the first term as if it came before the sequence starts. Adding 7 four times instead of subtracting, 60 + 7 × 4 = 88, uses the wrong operation. Stopping one term early gives the 4th term, 39.
- (d) 6.0 — Subtract 1.8 from both sides: 6.3x ≤ 38.2. Divide both sides by 6.3: x ≤ 6.0634… . The question asks for the greatest value to 1 decimal place that still satisfies the inequality. Testing 6.1: 6.3 × 6.1 + 1.8 = 40.23, which is more than 40, so 6.1 fails. Testing 6.0: 6.3 × 6.0 + 1.8 = 39.6, which is no more than 40, so 6.0 works and is the greatest such value. A candidate who simply rounds 6.0634… to 1 decimal place answers 6.1, without checking that it satisfies the inequality. A candidate who adds 1.8 instead of subtracting works out 41.8 ÷ 6.3 and answers 6.6. A candidate who forgets the 1.8 altogether divides 40 by 6.3 and answers 6.3.
- (d) 3 — The expression has three terms separated by + and − signs: 4x², −7x and 3. A candidate who thinks a number on its own does not count as a term says there are 2 terms, missing the 3. A candidate who miscounts the minus sign as creating an extra term says there are 4. A candidate who splits each term into its coefficient and letter part separately (4, x², 7, x, 3) says there are 5.
- (d) 21 − 3n — Method: find the common difference, then find the constant that fits the first term. Working: 15 − 18 = −3, 12 − 15 = −3, 9 − 12 = −3, so the terms decrease by 3 each time and the nth term has the form c − 3n. Substituting n = 1: c − 3(1) = 18, so c = 21. Answer: the nth term is 21 − 3n. The value 18 − 3n comes from using the first term as c directly, without adding back the difference that was removed. The value 3n − 21 comes from a sign error that flips the whole expression. The value −3n comes from using only the common difference and leaving out the constant.
- (c) 9 — Method: replace the letter with the value given for it, then work out the multiplication before the addition. Working: 5y means 5 × y, and 5 × 0 = 0, so the expression becomes 0 + 9, which is 9. Answer: 9. The distractors: 14 comes from treating 5 × 0 as 5, a common slip with zero, and then adding the 9; 0 comes from assuming that an expression containing a zero must itself be zero, so the + 9 is ignored; 45 comes from multiplying the whole expression by 5 instead of multiplying only y, giving 5 × (0 + 9).
- (a) 23 — The number of logs increases by 4 for each layer down, starting from 3 in the top layer, so the nth layer has 3+(n−1)×4 logs. For the 6th layer: 3+5×4=3+20=23. A candidate who adds the difference of 4 six times instead of five, treating the top layer as needing an addition too, would compute 3+6×4=27. A candidate who uses 4n instead of 4n−1, omitting the adjustment for the first layer, would compute 4×6=24. A candidate who subtracts the common difference, 4, instead of 1 when adjusting the multiplier would compute 4×6−4=20.
- (a) x = 2 — Method: undo the subtraction first, then undo the multiplication, doing the same to both sides each time. Working: adding 2 to both sides gives 2x = 4, and dividing both sides by 2 gives x = 2. Answer: x = 2. The distractors: x = 4 comes from stopping at 2x = 4 and writing 4 as the value of x; x = 0 comes from subtracting 2 from both sides instead of adding it, giving 2x = 0; x = 8 comes from multiplying 4 by 2 instead of dividing by 2.
- (b) It crosses the x-axis, since the minimum is below it. — A minimum turning point at (3, −4) means the lowest value the curve reaches is y = −4, which is below the x-axis (y = 0); since the curve opens upward from there, it must rise up through y = 0 on both sides, crossing the x-axis twice. Saying it does not cross confuses 'the minimum is negative' with 'the whole curve stays negative' — a minimum below the axis guarantees the curve rises above it elsewhere. Saying it touches the x-axis once at (3, −4) mistakes the turning point itself for a root — the turning point is not on the x-axis at all here, since its y-coordinate is −4, not 0. Saying it is impossible to tell ignores that the two facts given — that the turning point is a minimum, and that its y-coordinate is negative — are together enough to decide the number of crossings without knowing the equation.
- (c) 18 km/h — A straight line on a distance–time graph means a steady speed, so the speed is the distance gained divided by the time taken. First convert 40 minutes to hours: 40 ÷ 60 = 2/3 of an hour. Speed is distance ÷ time, so speed = 12 ÷ (2/3) = 12 × 3/2 = 18 km/h. The option 8 km/h comes from multiplying the distance by the time in hours instead of dividing: 12 × 2/3 = 8. The option 30 km/h comes from scaling the distance-per-minute rate by 100 instead of 60: 12 ÷ 40 = 0.3, then 0.3 × 100 = 30. The option 16 km/h comes from mistakenly treating 40 minutes as three-quarters of an hour instead of two-thirds: 12 ÷ 0.75 = 16.
- (c) The 5 must multiply both terms inside the bracket, so 5(x + 2) expands to 5x + 10, which is never equal to 5x + 2 for any value of x. — Expanding the bracket correctly, 5(x + 2) = 5x + 10, since the 5 multiplies both the x and the 2. This is never equal to 5x + 2, since that would require 10 = 2. The option claiming 5(x + 2) means 5 × x + 2 ignores that the 5 must multiply the whole bracket, not just the x-term. The option about working out the bracket first with a value of x misunderstands algebraic expansion, which holds for every x, not just specific ones. The option about addition before multiplication misapplies the order of operations to bracket expansion, which always distributes the outer factor over every term inside, whatever x is.
- (c) 5(x + y − 1) — Method: take out the highest common factor of all three terms and divide every term by it, the number term included. Working: the highest common factor of 5x, 5y and −5 is 5; dividing gives 5x ÷ 5 = x, 5y ÷ 5 = y and −5 ÷ 5 = −1, so the bracket holds x + y − 1. Answer: 5(x + y − 1), which multiplies back out to 5x + 5y − 5. The distractors: 5(x + y + 1) comes from dividing −5 by 5 and losing the minus sign; 5(x + y − 5) comes from dividing only the terms containing a letter by 5 and carrying the −5 into the bracket unchanged; 5(xy − 1) comes from collecting the unlike terms 5x and 5y as 5xy before factorising.
- (d) the y-axis, and 12 — Method: coordinates are written (x, y), so the first number is the distance across and the second the distance up; a point whose first coordinate is 0 has not moved across from the origin and therefore lies on the vertical axis. Working: in (0, 12) the first number is 0, so P is on the y-axis, and the second number, 12, is the y-coordinate of P. Answer: the y-axis, and 12. The distractors: 'the x-axis, and 12' comes from mixing up which axis the condition 'the first coordinate is 0' describes; 'the y-axis, and 0' comes from placing P correctly but reading the pair the wrong way round, so that the first number is quoted as the y-coordinate; 'the x-axis, and 0' comes from making both of those mistakes at once.
- (c) 100 — Method: apply the position-to-term rule straight to the position asked for, since it does not depend on the term before it. Working: the rule squares the position number and the position is 10, so the term is 10², which means 10 × 10. Answer: 100. The distractors: 81 comes from squaring 9 instead of 10, one position short; 20 comes from multiplying the position by 2 instead of squaring it; 1000 comes from cubing the position, 10 × 10 × 10, instead of squaring it.
Build your own mix at the worksheet builder.