Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.Work out the coordinates of the reflection of (6, −3) in the y-axis.
- 2.A sequence begins at 60, and each term after that is found by subtracting 7 from the term before it. Work out the 5th term of the sequence.
- 3.The first four terms of a sequence are 5, 8, 11, 14. Work out an expression, in terms of n, for the nth term.
- 4.The formula for the perimeter of a square is P = 4s, where s is the side length. Make s the subject of the formula.
- 5.A company charges for hiring chairs for a day. Hiring 1 chair costs £12, hiring 2 chairs costs £19, hiring 3 chairs costs £26, and hiring 4 chairs costs £33. Work out an expression, in terms of n, for the cost in pounds of hiring n chairs for a day.
- 6.A regular hexagon has sides of length (x + 2) cm. Write down an expression, in terms of x, for the perimeter of the hexagon.
- 7.A rectangle has length k cm and width 5 cm less than its length. Write down an expression for the width of the rectangle, in cm.
- 8.A table shows values of y = x² − x − 6 for x from −3 to 4: at x = −3, y = 6; x = −2, y = 0; x = −1, y = −4; x = 0, y = −6; x = 1, y = −6; x = 2, y = −4; x = 3, y = 0; x = 4, y = 6. Using the table, write down the two roots of x² − x − 6 = 0.y = x²
- 9.Which of these points lies in the first quadrant?
- 10.A number machine adds 5 to its input. Work out the output when the input is 0.
- 11.Point R has coordinates (3, −5). Point R is reflected in the line y = 2 to point S. Write down the coordinates of S.
- 12.To rearrange the formula y = 3x − 8 to make x the subject, Priya writes: 'Add 8 to both sides to get y + 8 = 3x, then divide both sides by 3 to get x = y + 8 ÷ 3.' Work out the correct expression for x.y = 3x − 8
- 13.The graph of y = x² − 5x + 6 crosses the x-axis at two points. By factorising, work out the x-coordinates of these two points.y = x² − 5x + 6
- 14.Which of these is an expression?
- 15.Which expression is equivalent to 4(x − 2) + 10?
Answer key
- (a) (−6, −3) — Reflecting in the y-axis changes the sign of the x-coordinate and keeps the y-coordinate the same: (−6, −3). (6, 3) comes from reflecting in the x-axis instead, which changes the sign of the y-coordinate. (−6, 3) comes from reflecting in both axes. (6, −3) comes from not applying the reflection at all.
- (c) 32 — The terms are 60, 53, 46, 39, 32 — each found by subtracting 7 from the term before, so the 5th term is 32. Subtracting 7 five times from the first term instead of four times, 60 − 7 × 5 = 25, treats the first term as if it came before the sequence starts. Adding 7 four times instead of subtracting, 60 + 7 × 4 = 88, uses the wrong operation. Stopping one term early gives the 4th term, 39.
- (d) 3n + 2 — The common difference is 3 (8−5=3), so the expression starts 3n. To match the first term when n=1, 3×1+c=5, so c=2: the nth term is 3n+2. A candidate who uses the first term itself as the constant, instead of first term minus the common difference, would write 3n+5 (giving 8, 11, 14, 17 — one term too high throughout). A candidate who omits the constant term altogether would write just 3n (giving 3, 6, 9, 12, not matching the sequence at all). A candidate who adds the common difference to n instead of multiplying would write n+3 (giving 4, 5, 6, 7, far too small).
- (c) s = P / 4 — Method: undo the multiplication by 4 by dividing both sides by 4. Working: P = 4s, so dividing both sides by 4 gives s = P / 4. The value s = 4P comes from multiplying by 4 instead of dividing — using the wrong inverse operation. The value s = P + 4 comes from adding 4 instead of dividing. The value s = P − 4 comes from subtracting 4 instead of dividing.
- (d) 7n + 5 — Method: find the rate charged per extra chair, then find the fixed part of the cost that fits hiring 1 chair. Working: the cost rises by £7 for each extra chair (19 − 12 = 7, 26 − 19 = 7, 33 − 26 = 7), so the cost has the form 7n + c. Substituting n = 1: 7(1) + c = 12, so c = 5. Answer: the cost in pounds is 7n + 5. The value 7n comes from ignoring the fixed part of the charge entirely. The value 7n + 12 comes from using the cost of 1 chair as the fixed part directly, without subtracting the per-chair rate first. The value 12n + 7 comes from swapping the roles of the cost of hiring 1 chair, £12, and the rate per extra chair, £7 — using the total for one chair as the coefficient of n and the rate as the fixed part.
- (a) 6x + 12 — A regular hexagon has 6 equal sides, so the perimeter is 6(x + 2) = 6x + 12. A candidate who multiplies only the x-term by 6 and forgets to multiply the 2 gets 6x + 2. A candidate who multiplies only the number term by 6 and forgets to multiply the x gets x + 12. A candidate who adds 6 and 2 to make a single coefficient of x instead of expanding the brackets gets 8x.
- (b) k − 5 — Method: the width is 5 less than the length, so subtract 5 from the length. Working: length − 5 = k − 5. Answer: k − 5. 5 − k comes from subtracting in the wrong order, taking the length away from 5 instead of the other way round. k + 5 comes from adding instead of subtracting, missing that the width is smaller than the length. 5k comes from multiplying the length by 5 instead of subtracting 5 from it.
- (d) x = −2 and x = 3 — The roots are the x-values where y = 0. Reading the table, y = 0 at x = −2 and at x = 3, so these are the two roots. Choosing x = −3 and x = 4 picks the endpoints of the table, where y = 6, not where y = 0. Choosing x = −1 and x = 2 picks values near the curve's lowest points, where y = −4, not where the curve crosses the axis. Choosing x = 0 and x = 1 picks the two x-values in the middle of the table without checking their y-values, which are both −6, not 0.
- (d) (3, 5) — Method: the quadrant a point lies in is decided by the signs of its two coordinates, and in the first quadrant both coordinates are positive. Working: (−2, 3) has a negative x-coordinate, so it sits to the left of the y-axis; (4, −1) has a negative y-coordinate, so it sits below the x-axis; (−1, −4) has both coordinates negative; only (3, 5) has a positive x-coordinate and a positive y-coordinate. Answer: (3, 5). The distractors: (−2, 3) is chosen by candidates who check only the y-coordinate and take a positive height as enough; (4, −1) is chosen by those who check only the x-coordinate; (−1, −4) is chosen by those who number the quadrants from the bottom left, so that the region with two negative coordinates is called the first.
- (a) 5 — Method: apply the machine's operation to the input, and treat zero as an input like any other. Working: the machine gives 0 + 5, and counting on 5 from zero leaves the 5 unchanged. Answer: 5. The distractors: 0 comes from assuming that an input of 0 must give an output of 0, which is true for a machine that multiplies but not for one that adds; −5 comes from subtracting 5 instead of adding it; 6 comes from treating the input as 1 rather than 0 and working out 1 + 5.
- (c) (3, 9) — Reflecting in the horizontal line y = 2 keeps the x-coordinate the same and maps y to 2 × 2 − y = 4 − (−5) = 9, so S = (3, 9). A candidate who uses k − y instead of 2k − y gets 2 − (−5) = 7, giving (3, 7). A candidate who reflects in the x-axis instead of the line y = 2, simply changing the sign of y, gets (3, 5). A candidate who also changes the sign of the x-coordinate, as if reflecting in both axes, gets (−3, 9).
- (d) x = (y + 8) / 3 — Method: add 8 to both sides, then divide the whole side by 3. Working: y = 3x − 8, so adding 8 to both sides gives y + 8 = 3x, then dividing both sides by 3 gives x = (y + 8) / 3. The value x = y + 8 / 3 is Priya's version, which comes from dividing only the 8 by 3 instead of dividing the whole expression y + 8 by 3. The value x = (y − 8) / 3 comes from a sign error, keeping −8 instead of moving it to +8. The value x = 3(y + 8) comes from multiplying by 3 instead of dividing.
- (c) x = 2 and x = 3 — x² − 5x + 6 factorises as (x − 2)(x − 3), since −2 and −3 multiply to give 6 and add to give −5. The graph crosses the x-axis where each bracket equals zero: x − 2 = 0 gives x = 2, and x − 3 = 0 gives x = 3. The option x = −2 and x = −3 comes from reading the signs inside the brackets directly instead of solving x − 2 = 0 and x − 3 = 0. The option x = 2 and x = −3 mixes up the sign of only one root. The option x = −1 and x = −6 comes from picking the wrong pair of factors of 6 (1 and 6 instead of 2 and 3) and then reading their signs directly from the brackets.
- (c) 5y − 2 — An expression is a collection of terms with no equals sign and no inequality sign in it: nothing is being claimed about two sides. Here 5y − 2 on its own fits that description. The line with an equals sign and one unknown letter to find is an equation; the line joined by a comparison sign is an inequality; the line that links two different letters so that one can be worked out from the other is a formula.
- (a) 4x + 2 — Expand the bracket: 4(x − 2) = 4x − 8. Then add the 10 that follows the bracket: 4x − 8 + 10 = 4x + 2. The option 4x − 8 comes from expanding the bracket correctly but then forgetting to add the 10. The option 4x + 8 comes from forgetting to multiply the 2 inside the bracket by 4 (treating it as 4x − 2 instead of 4x − 8), then adding 10. The option 4x + 18 comes from a sign error when expanding — treating 4 × (−2) as +8 instead of −8, giving 4x + 8, then adding 10.
Build your own mix at the worksheet builder.