Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.Work out the distance of the point (−6, 4) from the x-axis.
- 2.A graph has equation y = x² − 6x + 5. A student says its turning point has x-coordinate 6, because that's the coefficient of x. Which statement corrects the student's mistake?y = x² − 6x + 5
- 3.Solve 4x − (2x − 6) = 18
- 4.Solve the simultaneous equations x + y = 1 and 2x + y = 5.
- 5.A ball's height, h metres, t seconds after being thrown follows h = (t − 1)(9 − t). Given that the ball is at ground level at t = 1 and t = 9, work out at what time t the ball reaches its maximum height, using symmetry.
- 6.Yuki is y years old. Her brother is 4 years younger than Yuki. Write down an expression, in terms of y, for the brother's age in 5 years' time.
- 7.The diagram shows part of the graph of a reciprocal function of the form , passing through the labelled point. Work out the value of k.
- 8.The point A lies on the x-axis. Which statement about A must be true?
- 9.Expand and simplify (x − 3)²
- 10.The triangular numbers begin 1, 3, 6, 10, 15, ... Work out the next term in the sequence.
- 11.A rule turns each input into an output. An input of 0 gives an output of −1, an input of 1 gives an output of 1, and an input of 2 gives an output of 3. Work out the rule, writing the input as x and the output as y.
- 12.The formula for the perimeter of a square is P = 4s, where s is the side length. Make s the subject of the formula.
- 13.Write down the first four terms of the sequence with nth term 6n − 5.
- 14.Solve 2x² = 18.
- 15.Expand 7(a + 8)
Answer key
- (c) 4 — Method: the distance of a point from the x-axis is measured vertically, so it is the size of the y-coordinate taken without its sign. Working: the point (−6, 4) has y-coordinate 4, so moving straight down to the x-axis covers 4 units, and a distance is written as a positive number. Answer: 4. The distractors: 6 comes from using the x-coordinate, which measures the distance from the y-axis rather than from the x-axis; −6 comes from that same mistake with the minus sign left in place, although a distance is never negative; 10 comes from adding the two distances, 6 and 4, as though the question asked how far the point is from both axes together.
- (d) The roots of x² − 6x + 5 = 0 are x = 1 and x = 5 (since it factorises to (x − 1)(x − 5)), so by symmetry the turning point has x-coordinate 3, not 6. — Factorising, x² − 6x + 5 = (x − 1)(x − 5), so the roots are x = 1 and x = 5. The turning point lies midway between the roots by symmetry: (1 + 5) ÷ 2 = 3. The coefficient of x has no direct role in locating the turning point this way. The option giving −6 makes an arbitrary sign change with no mathematical basis. The option giving 5 wrongly takes just one of the two roots instead of their midpoint.
- (a) x = 6 — Method: a minus sign in front of a bracket changes the sign of every term inside it, so expand the bracket first and then simplify. Working: expanding gives 4x − 2x + 6 = 18, which simplifies to 2x + 6 = 18; subtracting 6 from both sides gives 2x = 12, and dividing both sides by 2 gives x = 6. Answer: x = 6. The distractors: x = 12 comes from leaving the −6 unchanged when the bracket is removed, giving 4x − 2x − 6 = 18 and so 2x = 24; x = 24 comes from reaching 2x = 12 correctly and then multiplying by 2 instead of dividing by 2; x = 3 comes from dividing by 2 too early, at 2x + 6 = 18, and dividing only the 2x and the 18 while leaving the 6 untouched, which gives x + 6 = 9.
- (a) x = 4, y = −3 — Method: both equations contain +y with the same coefficient, so subtracting one equation from the other removes y. Working: (2x + y) − (x + y) = 5 − 1 gives x = 4; substituting x = 4 into x + y = 1 gives 4 + y = 1, so y = −3. Answer: x = 4, y = −3, which also satisfies 8 − 3 = 5. The distractors: x = 4, y = 5 comes from rearranging x + y = 1 as y = 1 + x; x = −2, y = 3 comes from eliminating x by doubling the first equation and then reading −y = 3 as y = 3; x = 6, y = −5 comes from adding the constants instead of subtracting them while eliminating y, taking x as 5 + 1.
- (d) t = 5 — The maximum height occurs halfway between the two times when the ball is at ground level: the midpoint of t = 1 and t = 9 is (1 + 9) ÷ 2 = 5, so the ball reaches its maximum height at t = 5 seconds. Getting t = 4 comes from halving the DIFFERENCE between the times, 9 − 1 = 8, then 8 ÷ 2 = 4, instead of finding their midpoint. Getting t = 8 uses that difference, 9 − 1 = 8, as if the gap between the two times were itself the time of the maximum. Getting t = 10 adds the two times, 1 + 9 = 10, but forgets to divide by 2.
- (a) y + 1 — The brother's age now is y − 4. In 5 years' time this becomes y − 4 + 5 = y + 1. A candidate who adds 4 instead of subtracting it, then adds 5, gets y + 4 + 5 = y + 9. A candidate who subtracts 5 instead of adding it gets y − 4 − 5 = y − 9. A candidate who works out the brother's current age but forgets to add on the 5 years gets y − 4.
- (b) 6 — Method: for any point that lies on y = k/x, the value of k is found by multiplying the x-coordinate and the y-coordinate together, since k = x × y. Working: k = 2 × 3 = 6. Answer: k = 6. Distractor refutation: 1.5 comes from dividing the y-coordinate by the x-coordinate instead of multiplying them. 5 comes from adding the two coordinates instead of multiplying them. 9 comes from misreading the point's x-coordinate as 3 instead of 2, then multiplying 3 × 3.
- (a) y = 0 — Method: in the pair (x, y) the first coordinate measures how far left or right of the origin a point is and the second how far above or below the x-axis it is, so a point on an axis has one of those measurements equal to zero. Working: the x-axis is the horizontal line through the origin, so a point sitting on it is neither above nor below that line and its second coordinate is zero, while its first coordinate may be positive, negative or zero. Answer: y = 0. The distractors: x = 0 is the condition for lying on the y-axis, the other axis; x > 0 comes from assuming a point on the x-axis must be to the right of the origin, which is true only of part of that axis; x = y holds only at the origin, which is one point of the x-axis rather than a property shared by all of them.
- (d) x² − 6x + 9 — Method: squaring a bracket means multiplying that bracket by itself, so expand (x − 3)(x − 3) term by term and then collect like terms. Working: x × x = x², x × (−3) = −3x, (−3) × x = −3x and (−3) × (−3) = 9, giving x² − 3x − 3x + 9, and the two middle terms collect to −6x. Answer: x² − 6x + 9. The distractors: x² − 3x + 9 comes from writing down only one of the two middle products instead of both; x² + 6x + 9 comes from treating (−3) × x as +3x, so the middle terms are added rather than subtracted; x² − 9 comes from treating the square as the difference of two squares (x − 3)(x + 3).
- (d) 21 — The differences between consecutive triangular numbers increase by 1 each time: 3−1=2, 6−3=3, 10−6=4, 15−10=5. So the next difference is 6, giving 15+6=21. A candidate who keeps the difference the same as the previous step (adding 5 again) would reach 20. A candidate who uses a constant difference of 3 throughout would reach 18. A candidate who instead finds the square of the term number (5²=25, since 15 is the 5th term) would reach 25 — that is the rule for square numbers, not triangular numbers.
- (b) y = 2x − 1 — Method: in a rule that multiplies and then adds, the multiplier is the step in the outputs for each step of 1 in the input, and the number added on is the output when the input is 0. Working: the inputs 0, 1, 2 rise in ones while the outputs −1, 1, 3 rise by 2 each time, so the input is multiplied by 2; an input of 0 gives 2 × 0 = 0 and the output must be −1, so 1 is subtracted. Answer: y = 2x − 1, checked against the last pair by 2 × 2 − 1 = 3. The distractors: y = 2x + 1 comes from finding the multiplier 2 correctly and then reading the output at an input of 0 as +1 instead of −1; y = x − 1 comes from taking the multiplier as 1 because the inputs go up in ones, instead of using the step in the outputs; y = 3x − 1 comes from reading the largest output, 3, as the multiplier.
- (c) s = P / 4 — Method: undo the multiplication by 4 by dividing both sides by 4. Working: P = 4s, so dividing both sides by 4 gives s = P / 4. The value s = 4P comes from multiplying by 4 instead of dividing — using the wrong inverse operation. The value s = P + 4 comes from adding 4 instead of dividing. The value s = P − 4 comes from subtracting 4 instead of dividing.
- (c) 1, 7, 13, 19 — Method: substitute n = 1, 2, 3, 4 into the rule 6n − 5 in turn. Working: n = 1: 6 − 5 = 1. n = 2: 12 − 5 = 7. n = 3: 18 − 5 = 13. n = 4: 24 − 5 = 19. Answer: 1, 7, 13, 19. 6, 12, 18, 24 comes from using 6n on its own, forgetting to subtract 5. 5, 11, 17, 23 comes from using the rule 6n − 1 instead of 6n − 5, a slip in the constant. 0, 6, 12, 18 comes from using 6(n − 1) instead of 6n − 5, effectively shifting every term one position along.
- (d) x = 3 or x = −3 — Method: get x² on its own with a coefficient of 1, then take the square root of both sides and keep both the positive and the negative root. Working: dividing 2x² = 18 by 2 gives x² = 9, and the square root of 9 is 3, so x = 3 or x = −3; both check, because 2 × 9 = 18 either way. Answer: x = 3 or x = −3. The distractors: x = 9 or x = −9 comes from dividing by 2 and then forgetting to take the square root; x = 4 or x = −4 comes from subtracting 2 from 18 instead of dividing by it, giving x² = 16; x = 6 or x = −6 comes from multiplying by 2 instead of dividing, giving x² = 36.
- (d) 7a + 56 — Method: multiplying a single term over a bracket means every term inside the bracket is multiplied by the term outside. Working: 7 × a = 7a and 7 × 8 = 56, and the two products are added because the bracket contains an addition. Answer: 7a + 56. The distractors: 7a + 15 comes from adding 7 and 8 instead of multiplying them; 7a + 8 comes from multiplying only the first term inside the bracket and copying the 8 across unchanged; a + 56 comes from multiplying only the 8 and copying the a across unchanged.
Build your own mix at the worksheet builder.