Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (d) 110 — Method: form the equation 15 + 0.08m = 23.80, where m is the number of minutes, then solve for m. Working: subtract the fixed fee: 0.08m = 23.80 − 15 = 8.80. Divide by the cost per minute: m = 8.80 ÷ 0.08 = 110. Answer: 110 minutes. 1.1 comes from using 8 instead of 0.08 as the cost per minute, forgetting to convert pence to pounds. 297.5 comes from dividing the whole bill by the cost per minute without subtracting the fixed fee first, 23.80 ÷ 0.08. 485 comes from adding the fixed fee to the bill instead of subtracting it, before dividing by the cost per minute, (23.80 + 15) ÷ 0.08.
- (d) 21 — The differences between consecutive triangular numbers increase by 1 each time: 3−1=2, 6−3=3, 10−6=4, 15−10=5. So the next difference is 6, giving 15+6=21. A candidate who keeps the difference the same as the previous step (adding 5 again) would reach 20. A candidate who uses a constant difference of 3 throughout would reach 18. A candidate who instead finds the square of the term number (5²=25, since 15 is the 5th term) would reach 25 — that is the rule for square numbers, not triangular numbers.
- (a) 23 — The number of logs increases by 4 for each layer down, starting from 3 in the top layer, so the nth layer has 3+(n−1)×4 logs. For the 6th layer: 3+5×4=3+20=23. A candidate who adds the difference of 4 six times instead of five, treating the top layer as needing an addition too, would compute 3+6×4=27. A candidate who uses 4n instead of 4n−1, omitting the adjustment for the first layer, would compute 4×6=24. A candidate who subtracts the common difference, 4, instead of 1 when adjusting the multiplier would compute 4×6−4=20.
- (c) 4 — Method: the distance of a point from the x-axis is measured vertically, so it is the size of the y-coordinate taken without its sign. Working: the point (−6, 4) has y-coordinate 4, so moving straight down to the x-axis covers 4 units, and a distance is written as a positive number. Answer: 4. The distractors: 6 comes from using the x-coordinate, which measures the distance from the y-axis rather than from the x-axis; −6 comes from that same mistake with the minus sign left in place, although a distance is never negative; 10 comes from adding the two distances, 6 and 4, as though the question asked how far the point is from both axes together.
- (d) 15b — Method: each balloon costs 15p, so b balloons cost 15 × b pence. Working: 15 × b = 15b. Answer: 15b. b + 15 comes from treating the 15p as a one-off addition rather than a rate applied to every balloon. b − 15 comes from misreading the situation as a discount rather than a cost per balloon. b/15 comes from dividing instead of multiplying, swapping the two operations.
- (b) 5 — Method: add 9 to both sides, then divide by 5. Working: 5x = 16 + 9 = 25, so x = 25 ÷ 5 = 5. Answer: 5. 3.2 comes from dividing 16 by 5 directly, without adding 9 first. 1.4 comes from a sign error, subtracting 9 from 16 instead of adding it, then dividing by 5. 25 comes from correctly working out 5x = 25 but stopping there, without dividing by 5 to find x.
- (a) 7 — Subtract 4 from both sides: 3h ≤ 21. Divide both sides by 3: h ≤ 7, so the greatest whole number of hours is 7. A candidate who forgets the £4 fixed fee solves 3h ≤ 25, getting h ≤ 8.33, rounded down to 8. A candidate who adds the £4 instead of subtracting it solves 3h ≤ 29, getting h ≤ 9.67, rounded down to 9. A candidate who reaches h ≤ 7 but wrongly assumes the boundary value cannot be used, thinking that spending the whole £25 is not allowed, answers 6.
- (c) y = 2x + 1 — Method: the gradient of the line through two points is the change in y divided by the change in x, and the constant is then found by substituting one of the points into y = mx + c. Working: m = (5 − 3) ÷ (2 − 1) = 2 ÷ 1 = 2, so the line is y = 2x + c; substituting x = 1 and y = 3 gives 3 = 2 × 1 + c, so c = 3 − 2 = 1. Answer: y = 2x + 1. The distractors: y = x + 2 comes from taking the gradient as the change in x, 2 − 1 = 1, and then substituting (1, 3) to reach a constant of 2; y = 2x − 1 comes from working out the constant as mx − y, 2 × 1 − 3 = −1, instead of y − mx; y = 2x + 3 comes from using the y-coordinate of (1, 3) as the constant without substituting at all.
- (d) L/6 − 4 — Method: find the length of one equal piece first (divide by 6), then apply the later change (subtract 4) to that piece. Working: one piece is L/6 metres; removing 4 metres from it gives L/6 − 4. Answer: L/6 − 4. L/6 + 4 comes from adding the 4 metres instead of removing it. (L − 4)/6 comes from removing the 4 metres from the whole rope before cutting it into pieces, the wrong order. 4 − L/6 comes from subtracting the piece length from 4 instead of the other way round.
- (a) x = 3/2 or x = −3/2 — Method: the equation has an x² term and a number but no x term, so make x² the subject and then take the square root of both sides, keeping the negative root as well as the positive one. Working: adding 9 to both sides of 4x² − 9 = 0 gives 4x² = 9, and dividing both sides by 4 gives x² = 9/4. Square-rooting the top and the bottom of 9/4 gives 3/2, so x = 3/2 or x = −3/2, and each value checks out because 4 × 9/4 − 9 = 0. Answer: x = 3/2 or x = −3/2. The distractors: x = 3 or x = −3 comes from square-rooting both sides of 4x² = 9 without first dividing by the 4, so the coefficient of x² is ignored; x = 9/4 or x = −9/4 comes from stopping at x² = 9/4 and writing that value down as x, leaving the square root undone; x = 3/2 only comes from taking the positive square root of 9/4 and losing the negative solution.
- (b) 1215 — Method: generate the terms one at a time with the term-to-term rule and compare each with 1000 as you go, stopping at the first one that passes it. Working: the terms are 5, then 5 × 3 = 15, then 45, then 135, then 405, and 405 × 3 = 1215; 405 is still below 1000 while 1215 is above it. Answer: 1215. The distractors: 405 comes from stopping at the last term that is still below 1000 instead of giving the first one above it; 3645 comes from carrying on one term too far, past the first term that passes 1000; 2187 comes from using the multiplier 3 as the first term as well, generating 3, 9, 27, 81, 243, 729, 2187 instead of the sequence described.
- (d) 66 — 6 and (4x + 3) are correct factors of 24x + 18. — Substituting x=2 into 24x+18: 24×2+18=48+18=66. Checking the factorisation: 6×4x=24x and 6×3=18, so 6(4x+3)=24x+18, matching the original expression — 6 and (4x+3) are correctly identified as factors. A candidate who substitutes x=2 into (4x+3) but forgets to multiply by the factor 6 afterwards would compute just 4×2+3=11. A candidate who adds 24 and 18 together before multiplying by x, instead of multiplying 24 by x first, would compute (24+18)×2=84. A candidate who distributes the 6 over only the first term inside the brackets, forgetting the second, would check the factorisation as 6×4x=24x but leave the 3 unmultiplied, getting 24x+3 instead of 24x+18 — and would wrongly conclude that 6 and (4x+3) are not correct factors.
- (d) n/2 + 5 — Half of n is n ÷ 2, which is written as the fraction n/2. 'More than' means add, and the addition happens after the halving, so the expression is n/2 + 5. Writing (n + 5)/2 halves the 5 as well, because everything inside a bracket is divided; writing 2n + 5 doubles n instead of halving it; writing 5n/2 multiplies half of n by 5 instead of adding 5 to it.
- (b) 3, 6, 9, 12 — Method: substitute the positions n = 1, 2, 3 and 4 into the rule in turn, because a position-to-term rule gives each term from its own position number. Working: 3 × 1 = 3, 3 × 2 = 6, 3 × 3 = 9 and 3 × 4 = 12. Answer: 3, 6, 9, 12. The distractors: 3, 9, 27, 81 comes from reading 3n as 3 multiplied by itself n times and so multiplying by 3 at every step; 0, 3, 6, 9 comes from starting the count at n = 0, which shifts every term one place; 4, 5, 6, 7 comes from reading 3n as n + 3 and adding 3 to each position number instead of multiplying by 3.
- (c) 10 — Method: substitute the value of x, then follow the order of operations, carrying out the multiplication before the subtraction. Working: with x = 4 the rule reads y = 3 × 4 − 2; the multiplication gives 3 × 4 = 12, and taking 2 away gives 12 − 2. Answer: y = 10. The distractors: 14 comes from adding the 2 instead of subtracting it; 12 comes from working out 3 × 4 and stopping there, leaving the −2 unused; 6 comes from subtracting first, 4 − 2, and multiplying the result by 3.
Build your own mix at the worksheet builder.