Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (a) y = (x − 2)² + 3 — Since (x − 2)² is never negative, (x − 2)² + 3 is always at least 3, so y can never equal 0 and the graph never crosses the x-axis. The other three graphs are all given in a factorised or difference-of-squares form that shows two real roots: y = (x − 2)(x + 3) crosses at x = 2 and x = −3; y = x² − 9 = (x − 3)(x + 3) crosses at x = 3 and x = −3; y = (x + 4)(x − 1) crosses at x = −4 and x = 1.
- (c) Yes; x = (y + 5)/2 is right — Sam's method is correct throughout: adding 5 to both sides gives y + 5 = 2x, and dividing both sides by 2 gives x = (y + 5)/2, so Sam is right. The option giving x = (y − 5)/2 assumes 5 should be subtracted again, but 2x − 5 = y means 5 has already been subtracted, so it must be added back, not taken away a second time. The option giving x = y/2 + 5 divides only the y term by 2 and leaves the 5 unhalved, which is not a valid rearrangement. The option agreeing Sam is correct but changing step 2 to x = 2(y + 5) confuses '2x' with 'x divided by 2' — since x is multiplied by 2, the inverse is division, not multiplication. Sam's working, and his final formula x = (y + 5)/2, are both correct.
- (a) y = −2x + 3 — Method: find the step in the outputs for each step of 1 in the input — falling outputs mean a negative multiplier — then read off the output when the input is 0, because that is the number added on. Working: the outputs 5, 3, 1, −1 fall by 2 each time x rises by 1, so x is multiplied by −2; the output at x = 0 is 3, so 3 is added. Answer: y = −2x + 3, checked at x = 2 by −2 × 2 + 3 = −1. The distractors: y = 2x + 3 comes from taking the size of the step, 2, as the multiplier and ignoring the fact that the outputs are falling; y = −2x − 3 comes from using the correct multiplier but writing the number added on as −3 instead of the output 3 listed at x = 0; y = −x + 4 comes from taking the multiplier as −1, its size read from the step of 1 in the inputs instead of the step of 2 in the outputs and its sign from the fact that the outputs fall, and then fitting the number added on to the pair x = −1, y = 5.
- (d) x < 7 — Method: add 10 to both sides to leave x on its own; adding the same number to both sides never changes the direction of an inequality. Working: adding 10 to both sides of x − 10 < −3 leaves x on the left and −3 + 10 on the right, and −3 + 10 = 7, so x < 7. Answer: x < 7. The distractors: x > 7 comes from turning the sign round while adding, as though every move flipped it; x < −13 comes from subtracting 10 from both sides instead of adding it, giving −3 take away 10; x < 13 comes from ignoring the minus sign on −3 and working out 3 + 10 instead.
- (b) −3 — Method: the gradient of a straight line is the change in y divided by the change in x, with the two coordinates taken in the same order in the numerator as in the denominator. Working: going from (−1, 5) to (3, −7), the change in y is −7 − 5 = −12 and the change in x is 3 − (−1) = 4, so the gradient is −12 ÷ 4 = −3. Answer: −3. The distractors: 3 comes from subtracting the y-coordinates in one order and the x-coordinates in the other, giving 12 ÷ 4; −1/3 comes from dividing the change in x by the change in y instead of the other way round, giving 4 ÷ (−12); −6 comes from working out 3 − (−1) as 3 − 1 = 2, so that the change in y is divided by 2 rather than by 4.
- (a) (−6, −3) — Reflecting in the y-axis changes the sign of the x-coordinate and keeps the y-coordinate the same: (−6, −3). (6, 3) comes from reflecting in the x-axis instead, which changes the sign of the y-coordinate. (−6, 3) comes from reflecting in both axes. (6, −3) comes from not applying the reflection at all.
- (a) 2x + 24 — Method: multiply each term inside the bracket by the 2 in front of it. Working: 2 × x = 2x and 2 × 12 = 24, and the products are added because the bracket contains an addition. Answer: 2x + 24. The distractors: 2x + 12 comes from multiplying only the x by 2 and copying the 12 across unchanged; 24x comes from multiplying 2 by 12 and then attaching the letter to that product, as though the two terms inside the bracket could be joined into one; 2x + 14 comes from adding 2 and 12 instead of multiplying them.
- (a) x = 2 — Method: undo the subtraction first, then undo the multiplication, doing the same to both sides each time. Working: adding 2 to both sides gives 2x = 4, and dividing both sides by 2 gives x = 2. Answer: x = 2. The distractors: x = 4 comes from stopping at 2x = 4 and writing 4 as the value of x; x = 0 comes from subtracting 2 from both sides instead of adding it, giving 2x = 0; x = 8 comes from multiplying 4 by 2 instead of dividing by 2.
- (d) the third quadrant — Method: only the signs of the coordinates matter, so two coordinates equal in size still have to be read separately, one for each axis. Working: both coordinates of (−2, −2) are negative, so B lies to the left of the y-axis and below the x-axis; counting anticlockwise from the region where both coordinates are positive, left and below is the third region. Answer: the third quadrant. The distractors: 'the first quadrant' comes from ignoring both minus signs and treating the point as (2, 2); 'the second quadrant' comes from applying the minus sign to the x-coordinate only, as though the point were (−2, 2); 'the fourth quadrant' comes from applying it to the y-coordinate only, as though the point were (2, −2).
- (b) 27 — 27 = 3³ (3 × 3 × 3), so it is a cube number. The other three, 9 = 3², 16 = 4² and 25 = 5², are all square numbers, not cube numbers — each is reached by multiplying a whole number by itself only twice, not three times.
- (a) (2, 7) — Midpoint = ((x1+x2)/2, (y1+y2)/2) = ((−3+7)/2, (5+9)/2) = (4/2, 14/2) = (2, 7). (4, 14) comes from adding the coordinates correctly but forgetting to divide by 2. (2, 9) comes from correctly averaging the x-coordinates but simply copying the y-coordinate of the second point instead of averaging the y-coordinates. (5, 2) comes from subtracting the coordinates instead of adding them before halving: ((7−(−3))/2, (9−5)/2) = (5, 2).
- (c) x = 2 and x = 3 — x² − 5x + 6 factorises as (x − 2)(x − 3), since −2 and −3 multiply to give 6 and add to give −5. The graph crosses the x-axis where each bracket equals zero: x − 2 = 0 gives x = 2, and x − 3 = 0 gives x = 3. The option x = −2 and x = −3 comes from reading the signs inside the brackets directly instead of solving x − 2 = 0 and x − 3 = 0. The option x = 2 and x = −3 mixes up the sign of only one root. The option x = −1 and x = −6 comes from picking the wrong pair of factors of 6 (1 and 6 instead of 2 and 3) and then reading their signs directly from the brackets.
- (d) 16 boys and 14 girls — Method: write the number of boys in terms of the number of girls, then use the total for the class. Working: if there are g girls then there are g + 2 boys, so g + (g + 2) = 30, that is 2g + 2 = 30, so 2g = 28 and g = 14; the number of boys is 14 + 2 = 16. Answer: 16 boys and 14 girls, which total 30 and differ by 2. The distractors: 14 boys and 16 girls comes from substituting for the wrong group, writing b + (b + 2) = 30 and then calling b the number of boys; 15 boys and 15 girls comes from halving 30 and never using the difference; 17 boys and 13 girls comes from adding the whole 2 to one half of the class and taking the whole 2 off the other half, which leaves a difference of 4.
- (b) (0, −2) — Method: a translation acts on the two coordinates separately: moving right or left changes the x-coordinate only, moving up or down changes the y-coordinate only, and right and up add while left and down subtract. Working: the point starts at (−4, 7); moving 4 units to the right gives an x-coordinate of −4 + 4 = 0; moving 9 units down gives a y-coordinate of 7 − 9 = −2. Answer: (0, −2). The distractors: (5, 3) comes from pairing each number with the wrong coordinate, adding 9 to −4 and taking 4 from 7; (0, 16) comes from treating 'down' as an addition, giving 7 + 9 = 16 for the second coordinate; (−8, −2) comes from treating 'to the right' as a subtraction, giving −4 − 4 = −8 for the first coordinate.
- (c) 37 — The first differences are 3, 5, 7, 9 — they increase by 2 each time (the second difference), so the next first difference is 11, giving 26+11=37. A candidate who repeats the last first difference (9) instead of increasing it would reach 26+9=35. A candidate who increases the difference by 4 instead of 2 would reach 26+13=39. A candidate who adds only the second difference (2) to the last term, instead of the next first difference, would reach 26+2=28.
Build your own mix at the worksheet builder.