Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (b) 3 — Method: a term is any part of an expression separated from the rest by a + or − sign, including a number on its own. Working: 8 − 3x + 5x² splits at the + and − signs into 8, −3x and 5x² — that is three separate terms. Answer: 3. Ryan's answer of 2 comes from wrongly excluding the number 8, thinking a term must contain a letter. 5 comes from miscounting by treating the coefficients and powers as separate terms as well as the letters. 1 comes from treating the whole expression as a single term because it is written without brackets.
- (b) 4, 12, 36, 108 — Method: multiply the previous term by 3 each time, starting from the first term. Working: 4 × 3 = 12, 12 × 3 = 36, 36 × 3 = 108. Answer: 4, 12, 36, 108. 4, 7, 10, 13 comes from adding 3 each time instead of multiplying by 3, confusing this with an arithmetic sequence. 4, 12, 15, 18 comes from multiplying correctly to get the second term, then switching to adding 3 for the rest. 12, 36, 108, 324 comes from listing the terms after the first term, missing off the starting value of 4.
- (c) y = x² — Method: test a candidate rule against every pair given, not just one — a rule that fits one pair and fails another is not the rule. Working: the outputs 1, 4, 9 rise by 3 and then by 5, so they are not going up in equal steps and the input is not simply multiplied by a fixed number; comparing each output with its own input gives 1 × 1 = 1, 2 × 2 = 4 and 3 × 3 = 9, and all three pairs fit. Answer: y = x². The distractors: y = 3x comes from fitting only the last pair, where 3 × 3 = 9, and reading that 3 as a multiplier; y = 3x − 2 comes from assuming a multiply-then-add rule and using the first step in the outputs, 4 − 1 = 3, as the multiplier — it fits the first two pairs and fails the third; y = 2x comes from fitting only the pair 2 and 4 and reading every output as double its input.
- (a) An identity, true for every value of x — Expanding the bracket on the left gives 3x + 12, which matches the right-hand side exactly, so the statement is true for every value of x — this makes it an identity. A candidate who reasons that any statement with an equals sign must be an equation picks that option, missing that an equation is only true for particular value(s) of x, not all of them. A candidate who confuses an identity with a formula, because both relate two expressions, picks the formula option — but a formula connects two different quantities, such as area and side length, not two equivalent forms of the same expression. A candidate who assumes it can be solved for a single value of x, as with a normal equation, picks that option, not realising there is no single solution here.
- (a) 11 — 2n − 7 = 15, so adding 7 to both sides gives 2n = 22, and dividing by 2 gives n = 11. A candidate who makes a sign error and forms the equation 2n + 7 = 15 gets 2n = 8 and n = 4. A candidate who correctly adds 7 to get 2n = 22 but forgets to divide by 2 gets n = 22. A candidate who ignores the −7 altogether and solves 2n = 15 gets n = 7.5.
- (b) x = 2 and x = −5 — Set each factor equal to zero: x − 2 = 0 gives x = 2, and x + 5 = 0 gives x = −5, so the graph crosses the x-axis at x = 2 and x = −5. Writing x = −2 and x = 5 flips the sign of both roots. Writing x = 2 and x = 5 keeps the first root correct but forgets to flip the sign for the second factor, using +5 instead of solving x + 5 = 0. Writing x = −2 and x = −5 flips the sign of the first root only, from solving x − 2 = 0 as x = −2.
- (a) 6c — Each box has 6 chocolates, so c boxes have 6 × c = 6c chocolates. A candidate who adds the number of boxes to the number per box instead of multiplying gets 6 + c. A candidate who subtracts instead of multiplying gets c − 6. A candidate who divides instead of multiplying gets c ÷ 6.
- (b) k − 5 — Method: the width is 5 less than the length, so subtract 5 from the length. Working: length − 5 = k − 5. Answer: k − 5. 5 − k comes from subtracting in the wrong order, taking the length away from 5 instead of the other way round. k + 5 comes from adding instead of subtracting, missing that the width is smaller than the length. 5k comes from multiplying the length by 5 instead of subtracting 5 from it.
- (c) (2, 5) — Reflecting in the x-axis keeps the x-coordinate the same and changes the sign of the y-coordinate: Q = (2, 5). (−2, −5) comes from reflecting in the y-axis instead, which changes the sign of the x-coordinate. (−2, 5) comes from reflecting in both axes. (2, −5) comes from not applying the reflection at all.
- (b) x = y − 7 — The letter x has 7 added to it, and the inverse of adding 7 is subtracting 7. Subtracting 7 from both sides leaves x on its own on the right, giving y − 7 = x, which is written x = y − 7. Adding 7 to both sides instead repeats the operation rather than undoing it; writing 7 − y reverses the subtraction, which changes the sign of the whole expression; writing 7y treats the addition as a multiplication.
- (c) 5 — Method: call the number of years ago t, take t off both ages, and form an equation from the comparison at that time. Working: t years ago the father was 40 − t and Ethan was 10 − t, so 40 − t = 7(10 − t); expanding gives 40 − t = 70 − 7t, adding 7t to both sides gives 40 + 6t = 70, subtracting 40 gives 6t = 30, and dividing by 6 gives t = 5. Checking: five years ago the father was 35 and Ethan was 5, and 35 = 7 × 5. Answer: 5. The distractors: 35 comes from finding the right moment but giving the father's age at that time instead of the number of years; 30 comes from using Ethan's present age on the right-hand side, 40 − t = 7 × 10, which gives t = −30 and is then written as 30; 24 comes from reaching 6t = 30 correctly and subtracting 6 instead of dividing by 6.
- (b) (−1, 6) — '6 units above the x-axis' gives a y-coordinate of 6, and the x-coordinate is given as −1, so F = (−1, 6). (6, −1) comes from swapping the x- and y-coordinates. (−1, −6) comes from treating 'above' as a negative direction instead of positive. (1, 6) comes from dropping the negative sign on the given x-coordinate.
- (b) 10 km — Method: find the constant speed from the graph (distance ÷ time for any point on the line), then multiply that speed by 20 minutes. Working: the line passes through (4 minutes, 2 km), so the speed is 2 ÷ 4 = 0.5 km per minute; in 20 minutes the cyclist travels 0.5 × 20 = 10 km. Answer: 10 km. Distractor refutation: 3 km comes from reading off the distance shown at the end of the plotted section (6 minutes) and stopping there, instead of extending the line to 20 minutes. 20 km comes from misreading the speed as 1 km per minute instead of 0.5 km per minute, doubling the true rate. 40 km comes from dividing 20 by the speed instead of multiplying by it, a reciprocal mix-up.
- (c) 5(x + y − 1) — Method: take out the highest common factor of all three terms and divide every term by it, the number term included. Working: the highest common factor of 5x, 5y and −5 is 5; dividing gives 5x ÷ 5 = x, 5y ÷ 5 = y and −5 ÷ 5 = −1, so the bracket holds x + y − 1. Answer: 5(x + y − 1), which multiplies back out to 5x + 5y − 5. The distractors: 5(x + y + 1) comes from dividing −5 by 5 and losing the minus sign; 5(x + y − 5) comes from dividing only the terms containing a letter by 5 and carrying the −5 into the bracket unchanged; 5(xy − 1) comes from collecting the unlike terms 5x and 5y as 5xy before factorising.
- (c) 70 — Method: the numbers of tiles form a sequence in which the same amount is added for each extra row, so the total for a number of rows is that amount multiplied by the number of rows. Working: 20 − 10 = 10 and 30 − 20 = 10, so each row adds 10 tiles; 7 rows therefore need 7 lots of 10, that is 7 × 10. Answer: 70. The distractors: 80 comes from counting one row too many and giving the total for 8 rows; 17 comes from adding the 10 tiles to the 7 rows instead of multiplying; 10 comes from giving the number of tiles in a single row rather than the total for all the rows.
Build your own mix at the worksheet builder.