Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (b) b = a/5 — Writing 5b means 5 × b, so b has been multiplied by 5. The inverse of multiplying by 5 is dividing by 5, and dividing both sides by 5 gives a/5 = b, which is written b = a/5. Multiplying both sides by 5 instead gives 5a, which applies the operation a second time; treating the 5 as though it were added gives a − 5; writing 5/a turns the fraction upside down.
- (d) 3m³ — Method: multiply the powers of m by adding their indices, then bring the number coefficient to the front. Working: m² × m has indices 2 and 1; add them to get 3, giving m³, then × 3 gives 3m³. Answer: 3m³. 3m² comes from multiplying the indices instead of adding them: 2 × 1 = 2, giving m², then × 3 = 3m². m³ comes from correctly combining the m's but dropping the coefficient 3. m⁶ comes from multiplying the index by the coefficient instead of writing the coefficient in front: taking the 2 in m² and the 3 to give m raised to the power 2 × 3, which is m⁶, with the lone m left out.
- (d) x = 1 — A quadratic graph is symmetrical about its turning point, so the turning point's x-coordinate is the midpoint of the two roots: (−2 + 4) ÷ 2 = 2 ÷ 2 = 1. The option x = 2 comes from adding the two roots but forgetting to divide by 2. The option x = −1 makes a sign error when adding the roots, treating −2 + 4 as −2. The option x = 3 comes from subtracting the roots instead of adding them: (4 − (−2)) ÷ 2 = 3.
- (a) 20 — Method: the paper has run out when S = 0, so substitute S = 0 into the equation and solve for t. Working: 0 = 480 − 24t, so 24t = 480, and t = 480 / 24 = 20. Answer: it takes 20 minutes. The value 480 comes from giving the starting number of sheets, the intercept of the equation, instead of solving for t. The value 456 comes from working out 480 − 24 and stopping after one step instead of solving the equation fully. The value 0.05 comes from inverting the division, working out 24 / 480 instead of 480 / 24.
- (a) 17 — Substitute a = 3 into 5a + 2: 5 × 3 + 2 = 15 + 2 = 17. 10 comes from treating 5a as 5 + a instead of 5 × a, giving 5 + 3 + 2. 25 comes from adding the 2 to a before multiplying by 5, 5 × (3 + 2). 15 comes from working out 5 × 3 correctly but forgetting to add the 2.
- (d) The graph never crosses either axis — Since x ≠ 0, there is no point on the graph where x = 0, so it cannot cross the y-axis; likewise 1/x is never equal to 0 for any x, so it cannot cross the x-axis either — the graph never touches either axis. A candidate who forgets the restriction x ≠ 0 might think the graph behaves like other graphs and passes through the origin, (0, 0). A candidate who correctly rules out the x-axis but forgets that x = 0 is also excluded might say the graph crosses the y-axis but never the x-axis. A candidate who only pictures the branch where x and y are both positive might say the graph has only one branch, in quadrant 1, forgetting the second branch where x and y are both negative.
- (b) £14 — Method: read the fixed charge (the cost at 0 miles) and the rate (the cost per extra mile) from the graph, then use them to work out the cost for a distance beyond the part that is plotted. Working: the graph shows a fixed charge of £2 at 0 miles, and the cost rises by £2 for every extra mile, so for 6 miles the cost is £2 + (£2 × 6) = £2 + £12 = £14. Answer: £14. Distractor refutation: £12 comes from multiplying the rate by the distance and leaving out the £2 fixed charge. £8 comes from misreading the rate as £1 per mile instead of £2 per mile. £24 comes from adding the fixed charge to the rate first and then multiplying the total by the distance, instead of multiplying the rate by the distance and then adding the fixed charge.
- (c) x ≥ 3 — Method: x is multiplied by 6, so divide both sides by 6; dividing by a positive number leaves the direction of the inequality unchanged. Working: dividing both sides of 6x ≥ 18 by 6 gives x on the left and 18 ÷ 6 on the right, and 18 ÷ 6 = 3, so x ≥ 3. Answer: x ≥ 3. The distractors: x ≤ 3 comes from turning the sign round on dividing, a step that is needed only when the divisor is negative; x ≥ 12 comes from subtracting 6 from both sides instead of dividing, giving 18 take away 6; x ≤ 12 comes from making both of those mistakes together.
- (d) 4 — Method: compare the equation with the general form y = mx + c after writing the x term first, then read off the coefficient of x. Working: y = 6 + 4x can be written as y = 4x + 6, so comparing with y = mx + c gives m = 4. Answer: the gradient is 4. The value 6 comes from reading off the constant, written first in the equation, and treating it as the gradient because it comes before the x term. The value 10 comes from adding the two numbers in the equation, 6 + 4, instead of reading off the coefficient of x. The value 24 comes from multiplying the two numbers in the equation, 6 × 4, instead of reading off the coefficient of x.
- (b) 60 km/h — Method: the gradient of a distance-time graph is the change in distance divided by the change in time, and for a journey at a steady rate that gradient is the speed. Working: the change in distance is 195 − 15 = 180 km and the change in time is 3 hours, so the gradient is 180 ÷ 3 = 60 km/h. Answer: 60 km/h. The distractors: 180 km/h comes from stopping at the change in distance and never dividing by the 3 hours; 195 km/h comes from reading the final marker as the rate instead of working with the change between the two markers; 3 km/h comes from quoting the time taken, which belongs on the bottom of the fraction, as though it were the value of the fraction itself.
- (c) x ≤ 4 — Subtract 9 from both sides: −2x ≥ 1 − 9 = −8. Divide both sides by −2, flipping the inequality: x ≤ 4. A candidate who divides by −2 but forgets to flip the inequality gets x ≥ 4. A candidate who divides −8 by −2 but keeps a negative sign gets x ≤ −4. A candidate who miscalculates 1 − 9 as −10 gets x ≤ 5.
- (a) −2 and 2 — Method: the graph crosses the x-axis where y = 0, so read the two crossing points straight off the curve. Working: the curve meets the horizontal axis two squares to the left of the origin and two squares to the right, at x = −2 and x = 2. Answer: −2 and 2. Distractor refutation: −4 and 4 comes from reading the value where the curve crosses the y-axis, −4, and using that value and its positive partner as the x-axis crossings instead. −2 and 3 comes from misreading the right-hand crossing point one square out along the grid, taking it where the curve is already above the axis. 0 and 2 comes from confusing the lowest point of the curve, which sits on the y-axis at x = 0, with one of the crossing points.
- (a) 4n + 1 — Method: find the increase in cost per hour, then find the constant by adjusting the 1-hour cost. Working: the cost goes up by £4 for each extra hour (9 − 5 = 4), so the coefficient of n is 4. The constant is the 1-hour cost minus the common difference: 5 − 4 = 1. Answer: the nth term is 4n + 1. 4n + 5 comes from using the 1-hour cost, 5, as the constant without subtracting the common difference. 4n − 3 comes from a slip in working out the constant, subtracting the common difference twice (5 − 4 − 4 = −3) instead of once. n + 4 comes from swapping the hourly increase and the constant.
- (a) P = 100I / (RT) — Method: undo the operations done to P in reverse order — multiply by 100, then divide by R and by T. Working: I = PRT/100, so 100I = PRT, so P = 100I / (RT). Answer: P = 100I / (RT). P = IRT/100 comes from leaving R and T in the numerator instead of moving them to the denominator. P = 100RT/I comes from swapping P and I when rearranging. P = 100I/R comes from dividing by R only and forgetting to also divide by T.
- (a) 3y² — There is one 3 in the product and the letter y appears twice. A number that multiplies a letter is written in front of it as the coefficient, so the 3 goes at the front. The two ys multiply each other, so the letter carries an index of 2. The shortest correct way of writing the product is therefore 3y². Note that (3y)² would mean 3 × y × 3 × y, which squares the coefficient as well, while 3 + y² turns a multiplication into an addition and y³ treats the coefficient as a third factor of y.
Build your own mix at the worksheet builder.