Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (a) It is 2(w + (w + 3)) = 4w + 6, not 2w + 3. — The perimeter of a rectangle is twice the width plus twice the length: 2 × w + 2 × (w + 3) = 2w + 2w + 6 = 4w + 6, so the gardener's 2w + 3 is wrong. Writing w + (w + 3) = 2w + 3 forgets to double the sides at all, only adding one width and one length once. Writing 4(w + 3) = 4w + 12 wrongly treats all four sides as equal to the length, as if the garden were a square. Writing 3w + 6 comes from doubling the length correctly but adding the width only once instead of doubling it too.
- (c) 4 — Method: subtract 3 from both sides, then divide by 4. Working: 4x = 19 − 3 = 16, so x = 16 ÷ 4 = 4. Answer: 4. 4.75 comes from dividing 19 by 4 directly, without subtracting 3 first. 3.75 comes from subtracting 4 instead of 3 before dividing. 5.5 comes from a sign error, adding 3 to 19 instead of subtracting it.
- (a) P = 100I / (RT) — Method: undo the operations done to P in reverse order — multiply by 100, then divide by R and by T. Working: I = PRT/100, so 100I = PRT, so P = 100I / (RT). Answer: P = 100I / (RT). P = IRT/100 comes from leaving R and T in the numerator instead of moving them to the denominator. P = 100RT/I comes from swapping P and I when rearranging. P = 100I/R comes from dividing by R only and forgetting to also divide by T.
- (c) 2x + 12 — Multiply every term inside the bracket by 2: 2 × x = 2x and 2 × 6 = 12, so 2(x + 6) = 2x + 12. Writing 2x + 6 comes from multiplying only the x-term and leaving the 6 unchanged. Writing x + 12 comes from multiplying only the 6 and leaving the x unchanged. Writing 2x + 8 comes from adding 2 and 6 instead of multiplying them.
- (b) One turning point. — Every quadratic graph, one with an x² term and no higher power of x, has exactly one turning point, since it is a single U-shaped or n-shaped curve. Saying two turning points describes a cubic graph, which can rise, turn, then turn again. Saying no turning points describes a straight line, which has none. Saying four turning points greatly overestimates how many times a simple quadratic curve changes direction — that would need a much higher power of x.
- (c) 6 — Method: rate = amount of fuel used ÷ time taken. Working: fuel used = 50 − 38 = 12 litres, time taken = 2 hours, so rate = 12 ÷ 2 = 6 litres per hour. Answer: the rate is 6 litres per hour. 44 comes from finding the average of the two fuel amounts, (50 + 38) ÷ 2, instead of the fuel used. 12 comes from working out the fuel used but forgetting to divide by the time taken. 19 comes from dividing the remaining fuel, 38, by the time taken instead of the fuel used.
- (a) (6, 0) — Method: a pair of coordinates records movement from the origin, the across movement written first and the up or down movement second. Working: C is 6 units to the right of the origin, so the across number is 6; it is 0 units up, so the up number is 0; written in order that gives (6, 0), a point on the x-axis. Answer: (6, 0). The distractors: (0, 6) comes from writing the two movements the wrong way round; (0, 0) comes from reading '0 units up' as meaning the point never left the origin at all, which ignores the movement across; (7, 0) comes from counting the origin itself as the first unit while counting 6 units to the right.
- (a) 20 — Method: the paper has run out when S = 0, so substitute S = 0 into the equation and solve for t. Working: 0 = 480 − 24t, so 24t = 480, and t = 480 / 24 = 20. Answer: it takes 20 minutes. The value 480 comes from giving the starting number of sheets, the intercept of the equation, instead of solving for t. The value 456 comes from working out 480 − 24 and stopping after one step instead of solving the equation fully. The value 0.05 comes from inverting the division, working out 24 / 480 instead of 480 / 24.
- (c) 14 — Substitute b = 6 into 3b − 4: 3 × 6 − 4 = 18 − 4 = 14. 5 comes from treating 3b as 3 + b instead of 3 × b, giving 3 + 6 − 4. 6 comes from subtracting 4 from b before multiplying by 3, 3 × (6 − 4). 18 comes from working out 3 × 6 correctly but forgetting to subtract the 4.
- (a) 2b — Method: a total cost is the price of one item multiplied by the number of items bought. Working: each pen costs £2 and there are b pens, so the total cost is 2 × b, which is written as 2b. Answer: 2b. The distractors: b + 2 comes from adding the price to the number of pens instead of multiplying, treating £2 as a one-off charge; 2b + 2 comes from multiplying correctly and then adding the £2 a second time as though there were also a fixed charge; b/2 comes from dividing by the price instead of multiplying by it.
- (a) 4 — Method: set up the equation 35 + 20h = 115, then subtract the fixed fee and divide by the hourly rate. Working: 20h = 115 − 35 = 80; h = 80 ÷ 20 = 4. Answer: 4 hours. 5.75 comes from dividing the whole £115 by £20 without first subtracting the fixed fee: 115 ÷ 20 = 5.75. 2.71 comes from swapping the fee and the rate round, subtracting £20 and dividing by £35: (115 − 20) ÷ 35 ≈ 2.71. 7.5 comes from adding the fixed fee instead of subtracting it: (115 + 35) ÷ 20 = 7.5.
- (b) 5 — From x + y = 7, x = 7 − y. Substituting into 3x + 2y = 16: 3(7 − y) + 2y = 16, so 21 − 3y + 2y = 16, giving 21 − y = 16, so y = 5 (then x = 2). A candidate who forgets to multiply the y-term inside the bracket by 3 would write 21 − y + 2y = 16, giving 21 + y = 16, so y = −5. A candidate who subtracts the two equations directly, (3x + 2y) − (x + y) = 16 − 7, gets 2x + y = 9, and if they wrongly treat this as giving y alone, ignoring the x term, they would answer 9. A candidate who reports the value of x instead of y would answer 2.
- (c) 6x(2x + 3) — The highest common factor of 12x² and 18x is 6x. Dividing each term by 6x gives 12x² ÷ 6x = 2x and 18x ÷ 6x = 3, so 12x² + 18x = 6x(2x + 3). A candidate who only takes out the number 6 (missing the x) gets 6(2x² + 3x), which is not fully factorised. A candidate who only takes out 2x (missing the extra factor of 3 in 6) gets 2x(6x + 9), also not fully factorised — the bracket still shares a common factor. A candidate who takes out 3x instead of the full 6x gets 3x(4x + 6), which again is not fully factorised since 4x + 6 shares a common factor of 2.
- (b) 3 + 2m — Method: add the fixed fee to the cost of the miles travelled. Working: the miles cost 2 × m = 2m pounds, and the fixed fee is £3, so the total is 3 + 2m. Answer: 3 + 2m. 2 + 3m comes from swapping which number is the fixed fee and which is the per-mile rate. 5 + m comes from adding the fixed fee and the rate together into one number, 3 + 2 = 5, before adding the miles, instead of multiplying the rate by the number of miles. 5m comes from multiplying that combined total by the miles, treating the whole £5 as if it were a per-mile rate.
- (a) −2 and 2 — Method: the graph crosses the x-axis where y = 0, so read the two crossing points straight off the curve. Working: the curve meets the horizontal axis two squares to the left of the origin and two squares to the right, at x = −2 and x = 2. Answer: −2 and 2. Distractor refutation: −4 and 4 comes from reading the value where the curve crosses the y-axis, −4, and using that value and its positive partner as the x-axis crossings instead. −2 and 3 comes from misreading the right-hand crossing point one square out along the grid, taking it where the curve is already above the axis. 0 and 2 comes from confusing the lowest point of the curve, which sits on the y-axis at x = 0, with one of the crossing points.
Build your own mix at the worksheet builder.