Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (c) 4 — Method: subtract 3 from both sides, then divide by 4. Working: 4x = 19 − 3 = 16, so x = 16 ÷ 4 = 4. Answer: 4. 4.75 comes from dividing 19 by 4 directly, without subtracting 3 first. 3.75 comes from subtracting 4 instead of 3 before dividing. 5.5 comes from a sign error, adding 3 to 19 instead of subtracting it.
- (d) 6 — Method: a value satisfies x ≥ 7 when it is greater than 7 or exactly equal to 7, so test each value against the boundary. Working: 8 is greater than 7 and 100 is greater than 7, so both satisfy the inequality; 7 is equal to the boundary and ≥ includes equality, so 7 satisfies it as well; 6 is less than 7, so 6 is the one value that fails. Answer: 6. The distractors: 7 is chosen by candidates who read ≥ as a strict 'greater than' and so shut the boundary value out of the solution set; 8 is chosen by reading the question as asking which value DOES satisfy the inequality and taking the smallest such value; 100 is chosen by the same misreading, taking instead the value furthest above the boundary.
- (a) 1 — Method: the value of y when x = 0 is where the line meets the y-axis, which is the constant c in y = mx + c, so the gradient is worked out from the two given points first and the constant follows by substituting one of them. Working: m = (16 − 7) ÷ (5 − 2) = 9 ÷ 3 = 3, so the line is y = 3x + c; substituting x = 2 and y = 7 gives 7 = 3 × 2 + c, so c = 7 − 6 = 1, and the value of y when x = 0 is that constant. Answer: 1. The distractors: 3 comes from stopping at the gradient and offering it as the intercept; 4 comes from stepping back from x = 2 to x = 0 by one unit of x instead of two, 7 − 3 = 4; −1 comes from working the constant out as mx − y, 3 × 2 − 7 = −1, instead of y − mx.
- (a) 16 — k = 8m ÷ 5 = (8 × 10) ÷ 5 = 80 ÷ 5 = 16. A candidate who multiplies 8 by 10 but forgets to divide by 5 gets 80. A candidate who divides 10 by 8 and multiplies by 5, using the fraction upside down, gets 10 × 5 ÷ 8 = 6.25. A candidate who adds instead of substituting into the formula gets 8 + 10 = 18.
- (c) x = −2 or x = 4 — The solutions of x² − 2x − 8 = 0 are the x-values where y = 0. From the table, y = 0 when x = −2 and when x = 4, so those are the two solutions. Distractor origins: x = −1 or x = 3 picks the pair of x-values that give equal (but non-zero) y-values instead of y = 0; x = 0 or x = −8 mixes up an x-value with its corresponding y-value; x = −2 only reads off one of the two roots and misses the other.
- (b) 10 km — Method: find the constant speed from the graph (distance ÷ time for any point on the line), then multiply that speed by 20 minutes. Working: the line passes through (4 minutes, 2 km), so the speed is 2 ÷ 4 = 0.5 km per minute; in 20 minutes the cyclist travels 0.5 × 20 = 10 km. Answer: 10 km. Distractor refutation: 3 km comes from reading off the distance shown at the end of the plotted section (6 minutes) and stopping there, instead of extending the line to 20 minutes. 20 km comes from misreading the speed as 1 km per minute instead of 0.5 km per minute, doubling the true rate. 40 km comes from dividing 20 by the speed instead of multiplying by it, a reciprocal mix-up.
- (c) 45 km/h — Method: speed = distance ÷ time = 90 ÷ 2 = 45 km/h. Distractor origins: 180 km/h multiplies distance by time instead of dividing (90 × 2 = 180); 88 km/h subtracts the time from the distance (90 − 2 = 88); 92 km/h adds the time to the distance (90 + 2 = 92).
- (c) 5(x + y − 1) — Method: take out the highest common factor of all three terms and divide every term by it, the number term included. Working: the highest common factor of 5x, 5y and −5 is 5; dividing gives 5x ÷ 5 = x, 5y ÷ 5 = y and −5 ÷ 5 = −1, so the bracket holds x + y − 1. Answer: 5(x + y − 1), which multiplies back out to 5x + 5y − 5. The distractors: 5(x + y + 1) comes from dividing −5 by 5 and losing the minus sign; 5(x + y − 5) comes from dividing only the terms containing a letter by 5 and carrying the −5 into the bracket unchanged; 5(xy − 1) comes from collecting the unlike terms 5x and 5y as 5xy before factorising.
- (b) 9 — Add the two equations to eliminate y: (x + y) + (x − y) = 15 + 3, so 2x = 18, and x = 9 (then y = 15 − 9 = 6). A candidate who reports the value of y instead of x would give 6. A candidate who forgets to divide by 2 after adding would give 18. A candidate who simply subtracts the two totals (15 − 3) instead of adding the equations would give 12.
- (d) 3x² + 4x − 7 — Method: the minus sign in front of the second bracket changes the sign of every term inside it; then collect like terms. Working: removing the brackets gives 5x² + 3x − 2 − 2x² + x − 5; the squared terms give 5x² − 2x² = 3x², the x terms give 3x + x = 4x, and the number terms give −2 − 5 = −7. Answer: 3x² + 4x − 7. The distractors: 7x² + 2x + 3 comes from adding the two brackets instead of subtracting, giving 5x² + 2x², 3x − x and −2 + 5; 3x² + 2x + 3 comes from applying the minus sign to 2x² only, leaving −x and +5 unchanged so that 3x − x = 2x and −2 + 5 = 3; 3x² + 4x + 3 comes from changing the signs of the terms with letters but leaving +5 as it stood, so the number terms give −2 + 5 = 3.
- (a) x = 3 — Method: factorise x² + 2x − 15 as (x + 5)(x − 3), since 5 × (−3) = −15 and 5 + (−3) = 2. Setting each bracket equal to zero gives x + 5 = 0 or x − 3 = 0, so x = −5 or x = 3. Only x = 3 is offered here. Distractor origins: x = −3 reverses the sign of the factor pair, treating the bracket (x − 3) as giving x = −3 instead of x = 3; x = 5 takes the number from the other factor, (x + 5), but with the wrong sign, giving x = 5 instead of x = −5; x = 15 takes the constant term of the original expression as if it were a root, without factorising at all.
- (b) P = 4s — A formula is a rule connecting two or more different quantities, so that one of them can be worked out once the others are known. P = 4s does exactly that: it gives P from s. The line with no equals sign is an expression; the line with an equals sign and a single unknown letter is an equation, because it is solved to find that letter; the line joined by a comparison sign is an inequality.
- (d) Yes: the 8th term is 50 − 8 × 7 = −6, which is negative. — Method: find the 8th term by subtracting 8 a total of 7 times from the first term, since the 1st term itself needs 0 subtractions. Working: 8th term = 50 − 8 × 7 = 50 − 56 = −6, which is negative, so Priya is correct. Answer: Yes, the 8th term is 50 − 8 × 7 = −6, which is negative. The "50 − 8 × 6 = 2" option subtracts 8 only six times instead of seven, an off-by-one error in counting the steps. The "50 − 8 × 8 = −14" option subtracts 8 eight times instead of seven, the opposite off-by-one error. The claim that repeated subtraction "can never go negative" ignores that subtracting enough times from any starting value eventually gives a negative result.
- (c) 18 km/h — A straight line on a distance–time graph means a steady speed, so the speed is the distance gained divided by the time taken. First convert 40 minutes to hours: 40 ÷ 60 = 2/3 of an hour. Speed is distance ÷ time, so speed = 12 ÷ (2/3) = 12 × 3/2 = 18 km/h. The option 8 km/h comes from multiplying the distance by the time in hours instead of dividing: 12 × 2/3 = 8. The option 30 km/h comes from scaling the distance-per-minute rate by 100 instead of 60: 12 ÷ 40 = 0.3, then 0.3 × 100 = 30. The option 16 km/h comes from mistakenly treating 40 minutes as three-quarters of an hour instead of two-thirds: 12 ÷ 0.75 = 16.
- (a) P = 100I / (RT) — Method: undo the operations done to P in reverse order — multiply by 100, then divide by R and by T. Working: I = PRT/100, so 100I = PRT, so P = 100I / (RT). Answer: P = 100I / (RT). P = IRT/100 comes from leaving R and T in the numerator instead of moving them to the denominator. P = 100RT/I comes from swapping P and I when rearranging. P = 100I/R comes from dividing by R only and forgetting to also divide by T.
Build your own mix at the worksheet builder.