Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (d) (0, 4) — Method: in the form y = mx + c the constant c is the y-coordinate of the point where the line crosses the y-axis, and every point on that axis has x-coordinate 0. Working: comparing y = 2x + 4 with y = mx + c gives c = 4, and substituting x = 0 confirms y = 2 × 0 + 4 = 4, so the crossing point is (0, 4). Answer: (0, 4). The distractors: (4, 0) is the same pair of numbers written in the wrong order and is a point on the x-axis; (0, 2) comes from reading the gradient 2 as the intercept, confusing m with c; (−2, 0) is where the line crosses the x-axis, found by solving 0 = 2x + 4 instead.
- (c) x = (y + 24)/4 — Method: expand the bracket first, then undo the operations done to x in reverse order. Working: y = 4(x − 6) = 4x − 24, so y + 24 = 4x, so x = (y + 24)/4. Answer: x = (y + 24)/4. x = (y + 6)/4 comes from expanding the bracket incorrectly, treating 4(x − 6) as 4x − 6 instead of 4x − 24. x = 4y + 96 comes from multiplying by 4 instead of dividing by 4 to undo the multiplication, giving 4(y + 24) = 4y + 96. x = y/4 − 6 comes from dividing by 4 first without expanding the bracket, then subtracting 6 as if the bracket's operation still applied afterwards.
- (a) P = 100I / (RT) — Method: undo the operations done to P in reverse order — multiply by 100, then divide by R and by T. Working: I = PRT/100, so 100I = PRT, so P = 100I / (RT). Answer: P = 100I / (RT). P = IRT/100 comes from leaving R and T in the numerator instead of moving them to the denominator. P = 100RT/I comes from swapping P and I when rearranging. P = 100I/R comes from dividing by R only and forgetting to also divide by T.
- (b) m = w + 8 — To make m the subject of w = m − 8, add 8 to both sides so the subtraction is undone: m = w + 8. Writing m = w − 8 forgets to change the operation at all — it just relabels the equation without moving the 8 across. Writing m = 8 − w swaps the order and puts the wrong sign on w, as if the equation had been w = 8 − m instead. Writing m = w/8 mistakes subtraction for a scaling relationship and divides by 8 instead of adding it. The correct rearrangement is m = w + 8.
- (d) 28 — The height decreases by 8 cm at each bounce after the first, so the nth bounce reaches 60−(n−1)×8 cm. For the 5th bounce: 60−4×8=60−32=28. A candidate who subtracts 8 one time too many, five times instead of four, would compute 60−5×8=20. A candidate who adds the decrease instead of subtracting it, a sign error, would compute 60+4×8=92. A candidate who works out only the total decrease and forgets to include the starting height of 60 cm would compute just 5×8=40.
- (d) 128 — In 2p³ the index belongs to p only, so cube p first and multiply by the coefficient afterwards. Cubing gives 4 × 4 × 4 = 64, and then 2 × 64 = 128. Cubing the coefficient as well would mean working out (2 × 4)³, which is 512. Reading the index as an instruction to multiply by 3 gives 2 × 4 × 3 = 24, and ignoring the coefficient altogether leaves 64.
- (c) x = −2 or x = 4 — The solutions of x² − 2x − 8 = 0 are the x-values where y = 0. From the table, y = 0 when x = −2 and when x = 4, so those are the two solutions. Distractor origins: x = −1 or x = 3 picks the pair of x-values that give equal (but non-zero) y-values instead of y = 0; x = 0 or x = −8 mixes up an x-value with its corresponding y-value; x = −2 only reads off one of the two roots and misses the other.
- (a) t = 0 or t = 4 — The ball is at ground level exactly when h = 0. From the table, h = 0 at t = 0 and at t = 4, so those are the two times. Distractor origins: t = 1 or t = 3 picks the times with equal (but non-zero) height instead of ground level; t = 2 picks the time of maximum height instead of ground level; t = 0 finds only the starting time and misses the second one.
- (b) −5 — Method: a point whose x-coordinate is 0 lies on the y-axis, so its y-coordinate is the constant c; once m and c are both known the equation can be written down and x substituted into it. Working: the line passes through (0, 1), so c = 1 and the equation is y = −3x + 1; substituting x = 2 gives y = −3 × 2 + 1 = −6 + 1 = −5. Answer: −5. The distractors: 7 comes from ignoring the minus sign on the gradient and working out 3 × 2 + 1; 5 comes from working out 3 × 2 = 6 and then using the minus sign to take the constant off the product, 6 − 1 = 5; −7 comes from subtracting the constant instead of adding it, −6 − 1 = −7.
- (d) x = 3 — Method: undo the operations on the left in reverse order — deal with the subtraction of 1 first, then with the multiplication by 3. Working: adding 1 to both sides gives 3x = 9, and dividing both sides by 3 gives x = 3. Answer: x = 3. The distractors: x = 9 comes from stopping at 3x = 9 and writing 9 as the value of x; x = 6 comes from subtracting 3 from 9 instead of dividing by 3; x = 27 comes from multiplying 9 by 3 instead of dividing by 3.
- (a) 14 — Substituting x = 3: y = 5(3) − 1 = 15 − 1 = 14. A candidate who stops after the multiplication and forgets to subtract 1 gets 15. A candidate who adds 1 instead of subtracting gets 16. A candidate who incorrectly treats the expression as 5 × (3 − 1) gets 10.
- (a) 6c — Each box has 6 chocolates, so c boxes have 6 × c = 6c chocolates. A candidate who adds the number of boxes to the number per box instead of multiplying gets 6 + c. A candidate who subtracts instead of multiplying gets c − 6. A candidate who divides instead of multiplying gets c ÷ 6.
- (d) (x − 8)(x + 8) — x² − 64 = x² − 8², a difference of two squares, which factorises as (x − 8)(x + 8). A candidate who treats it as a perfect square with a repeated negative factor gets (x − 8)(x − 8), which expands to x² − 16x + 64 — wrong on both the middle and constant terms. A candidate who uses a repeated positive factor gets (x + 8)(x + 8), which expands to x² + 16x + 64. A candidate who picks a different factor pair of 64, such as 4 and 16, without checking that the middle term cancels, gets (x − 4)(x + 16), which expands to x² + 12x − 64 — the wrong middle term.
- (c) t = 1 second and t = 5 seconds — The ball is at ground level when h = 0, which happens when either bracket is zero. t − 1 = 0 gives t = 1, and 5 − t = 0 gives t = 5. The option with t = −1 makes a sign error solving the first bracket. The option with t = −5 makes a sign error solving the second bracket, treating 5 − t = 0 as if it gave a negative solution. The option with t = 4 seconds is an arithmetic slip in solving 5 − t = 0.
- (d) −4 — The coefficient of a letter is the number multiplying it, taken with the sign written in front of that number. The term containing p is being subtracted, so the term is −4p and the number multiplying p is −4. Quoting 4 drops the sign; 7 is a constant term with no letter attached to it; 9 is the number multiplying q, which is a different letter.
Build your own mix at the worksheet builder.