Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (c) 5n + 1 — Method: find the common difference, then use it as the coefficient of n in the position-to-term rule, and find the constant by checking against the first term. Working: the common difference is 5, so the rule has the form 5n + c. Using the 1st term: 5(1) + c = 6, so c = 1. The rule is 5n + 1. Answer: 5n + 1. 5n − 1 uses the correct coefficient but the wrong sign for the constant. 6n comes from using the first term as the coefficient of n instead of the common difference — it matches the 1st term by coincidence but fails from the 2nd term onward. n + 5 swaps the coefficient and the constant around, using the common difference as the constant instead of the coefficient of n.
- (a) It is 2(w + (w + 3)) = 4w + 6, not 2w + 3. — The perimeter of a rectangle is twice the width plus twice the length: 2 × w + 2 × (w + 3) = 2w + 2w + 6 = 4w + 6, so the gardener's 2w + 3 is wrong. Writing w + (w + 3) = 2w + 3 forgets to double the sides at all, only adding one width and one length once. Writing 4(w + 3) = 4w + 12 wrongly treats all four sides as equal to the length, as if the garden were a square. Writing 3w + 6 comes from doubling the length correctly but adding the width only once instead of doubling it too.
- (a) 3y² — 'y squared, multiplied by 3' means the square is applied to y only, and the result is then multiplied by 3, written as 3y². Writing y³ mistakes the multiplication by 3 for an extra factor of y, adding to the power instead of using a coefficient. Writing (3y)² squares the whole of 3y, including the 3, which gives 9y² rather than 3y² — the square should apply to y alone. Writing 3 + y² adds the 3 instead of multiplying by it. The expression for 'y squared, multiplied by 3' is 3y².
- (c) (−4, 7) — Left of the origin means negative x, and up means positive y, so the point is (−4, 7). (4, 7) comes from forgetting that 'left' means the x-coordinate is negative. (−4, −7) comes from treating 'up' as a negative direction instead of positive. (7, −4) comes from swapping the x- and y-coordinates.
- (c) x = 2y + 10 — Method: undo the operations done to x in reverse order — add 5, then multiply by 2. Working: y = x/2 − 5, so y + 5 = x/2, so x = 2(y + 5) = 2y + 10. Answer: x = 2y + 10. x = 2y + 5 comes from multiplying only the x/2 term by 2 and forgetting to multiply the 5 as well. x = 2y − 10 comes from a sign error, subtracting 5 instead of adding it before multiplying by 2. x = (y + 5)/2 comes from dividing by 2 instead of multiplying, the wrong operation to undo a division.
- (c) a formula — A statement that shows how to calculate one quantity from others, using an equals sign, is a formula. P = 2l + 2w tells us how to work out the perimeter, P, from the length and width, so it is a formula. Distractor origins: 'an equation' confuses a formula linking several letters with an equation solved for one unknown value; 'an identity' confuses a formula with a statement that is true for every value of a single variable; 'an expression' forgets that an expression has no equals sign at all.
- (b) 28 — Method: find the common difference, then use the position-to-term rule (or extend the sequence) to reach the 9th term. Working: the common difference is 7 − 4 = 3, so the nth term is 4 + 3(n − 1). For n = 9: 4 + 3 × 8 = 4 + 24 = 28. Answer: 28. 27 comes from using 3n instead of 3n + 1, dropping the constant term from the rule, 3 × 9 = 27. 31 comes from extending from the 5th term by one step too many, adding 3 five times instead of four, 16 + 3 × 5. 25 comes from extending by one step too few, adding 3 three times instead of four, 16 + 3 × 3.
- (c) y = 4x − 5 — Parallel lines have the same gradient, so the new line has gradient 4; since it passes through (0, −5), its y-intercept is −5, giving y = 4x − 5. A candidate who drops the negative sign on the y-intercept would write y = 4x + 5. A candidate who changes the sign of the gradient, instead of keeping it the same for a parallel line, would write y = −4x − 5. A candidate who confuses m and c, using the y-intercept of the first line (3) as the gradient of the second, would write y = 3x − 5.
- (c) 4x − 3 — Subtract each term inside the bracket: 5x − (x + 3) = 5x − x − 3 = 4x − 3. Writing 4x + 3 comes from subtracting the x but not the 3, keeping its sign positive. Writing 6x − 3 comes from adding the x term, 5x + x = 6x, instead of subtracting it. Writing 5x − 3 comes from ignoring the x term inside the bracket and only subtracting the 3.
- (d) x = 4 or x = −4 — Method: divide both sides by 2 to get x² = 16, then take the square root of both sides: x = 4 or x = −4. Distractor origins: x = 4 forgets the negative root; x = 8 comes from halving 16 instead of taking its square root; x = 16 stops at x² = 16 without ever taking the square root.
- (a) x = 6 or x = −4 — We need two numbers that multiply to −24 and add to −2: these are −6 and 4, since −6 × 4 = −24 and −6 + 4 = −2. So x² − 2x − 24 = (x − 6)(x + 4) = 0, giving x = 6 or x = −4. A candidate who swaps the signs, using 6 and −4 the wrong way round in the brackets, gets x = −6 or x = 4. A candidate who picks the wrong factor pair, 8 and −3 (which multiply to −24 but add to +5, not −2), gets (x + 8)(x − 3) = 0 and answers x = −8 or x = 3. A candidate who makes both factors negative gets x = −6 or x = −4, which would require the constant term to be +24, not −24.
- (d) (−1, 4) — In parallelogram ABCD the side DC is parallel and equal to the side AB, so D = C − AB. The vector from A to B is (2 − (−3), 1 − 1) = (5, 0), so D = (4 − 5, 4 − 0) = (−1, 4). A candidate who adds this vector to C instead of subtracting it gets (4 + 5, 4 + 0) = (9, 4). A candidate who subtracts A's coordinates from C's rather than the vector AB, and drops the minus sign on −3 while doing so, works out (4 − 3, 4 − 1) and gets (1, 3). A candidate who makes only the y-part of that slip, working out 4 − 1 instead of 4 − 0, gets (−1, 3).
- (c) 71 — Method: square x first, then multiply by 3, then subtract 4, following the order of operations. Working: x² = 5² = 25; 3 × 25 = 75; 75 − 4 = 71. Answer: 71. 221 comes from squaring (3x) as a whole first: (3 × 5)² = 225, then − 4 = 221, squaring the coefficient along with x. 75 comes from correctly working out 3x² but forgetting to subtract the 4. 3 comes from subtracting the 4 from x before squaring: (5 − 4)² × 3 = 3, doing the operations in the wrong order.
- (d) 4n + 2 — Method: find the common difference, then find the constant by adjusting the first term. Working: 10 − 6 = 4, 14 − 10 = 4, so the common difference is 4 and the coefficient of n is 4. The constant is the first term minus the common difference: 6 − 4 = 2. Answer: the nth term is 4n + 2. 4n + 6 comes from using the first term, 6, as the constant without subtracting the common difference. 4n − 2 comes from working out the constant the wrong way round, as the common difference minus the first term (4 − 6 = −2) instead of the first term minus the common difference. 6n + 4 comes from swapping the common difference and the first term.
- (a) x > 4 — Subtract 2x from both sides: 3x − 3 > 9. Add 3 to both sides: 3x > 12. Divide both sides by 3: x > 4. A candidate who subtracts 3 from 9 instead of adding gets 3x > 6, so x > 2. A candidate who divides correctly but wrongly flips the inequality (as if dividing by a negative) gets x < 4. A candidate who multiplies by 3 instead of dividing gets x > 36.
Build your own mix at the worksheet builder.