Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (a) 3y² — 'y squared, multiplied by 3' means the square is applied to y only, and the result is then multiplied by 3, written as 3y². Writing y³ mistakes the multiplication by 3 for an extra factor of y, adding to the power instead of using a coefficient. Writing (3y)² squares the whole of 3y, including the 3, which gives 9y² rather than 3y² — the square should apply to y alone. Writing 3 + y² adds the 3 instead of multiplying by it. The expression for 'y squared, multiplied by 3' is 3y².
- (d) 10 — The right angle is at (1, 1). The vertical side has length 5 − 1 = 4 and the horizontal side has length 6 − 1 = 5, so the area is (4 × 5) ÷ 2 = 20 ÷ 2 = 10. A candidate who forgets to halve the product of the two sides gets 4 × 5 = 20. A candidate who forgets to subtract the shared vertex's coordinate and uses the raw coordinates 6 and 5 as the side lengths gets (6 × 5) ÷ 2 = 30 ÷ 2 = 15. A candidate who uses only one side length as the area gets 5.
- (c) y = 3x + 1 — Method: a line of known gradient m has equation y = mx + c, and c is found by substituting the coordinates of a point known to lie on it. Working: the gradient is 3, so the line is y = 3x + c; substituting x = 1 and y = 4 gives 4 = 3 × 1 + c, so c = 4 − 3 = 1. Answer: y = 3x + 1. The distractors: y = 3x − 1 comes from working out the constant as mx − y, 3 − 4 = −1, instead of y − mx; y = x + 3 comes from swapping the two numbers over, putting the gradient 3 in the constant position and the x-coordinate 1 in front of x; y = 3x + 4 comes from using the y-coordinate 4 as the constant without substituting.
- (c) 3 and 2n + 5 are both factors of 6n + 15 — Factors are the parts multiplied together to make an expression; terms are the parts added together. In 3(2n + 5) the 3 and the bracket 2n + 5 are multiplied, so both of them are factors of 6n + 15. The parts added together are 6n and 15, and those are its two terms, not its factors. A factor need not be a number: a bracket containing letters is a factor in exactly the same way.
- (b) 4 — Method: form the equation 30 + 25h = 130, where h is the number of hours, then solve for h. Working: subtract the call-out fee from the total bill: 25h = 130 − 30 = 100. Divide by the hourly rate: h = 100 ÷ 25 = 4. Answer: 4 hours. 5.2 comes from dividing the whole bill by the hourly rate without subtracting the fixed fee first, 130 ÷ 25. 3.5 comes from swapping the fee and the rate, subtracting the rate from the bill and dividing by the fee, (130 − 25) ÷ 30. 6.4 comes from adding the call-out fee to the bill instead of subtracting it, before dividing by the rate, (130 + 30) ÷ 25.
- (c) 55 — Continuing the pattern: 8+13=21 (5th term), 13+21=34 (6th term), 21+34=55 (7th term). A candidate who miscounts the position and stops one term early would give 34, the 6th term. A candidate who doubles the most recent term instead of adding the two before it would compute 34×2=68. A candidate who adds a non-adjacent pair — the 4th and 6th terms, skipping the 5th — would compute 13+34=47.
- (c) x = 2 or x = 3 — Method: factorise into two brackets whose numbers multiply to the constant term and add to the coefficient of x, then set each bracket equal to zero. Working: two numbers that multiply to 6 and add to −5 are −2 and −3, so x² − 5x + 6 = (x − 2)(x − 3) = 0; then x − 2 = 0 gives x = 2 and x − 3 = 0 gives x = 3. Answer: x = 2 or x = 3. The distractors: x = −2 or x = −3 comes from reading the numbers inside the brackets as the solutions instead of changing their signs; x = 1 or x = 6 comes from taking the first factor pair of 6 without checking that the pair adds to −5; x = 5 or x = 6 comes from reading the solutions straight off the 5 and the 6 in the equation.
- (b) (−5, −2) — A rotation of 180° about the origin reverses the sign of both coordinates, so Q = (−5, −2). A candidate who reverses the sign of only the y-coordinate, as if reflecting in the x-axis, gets (5, −2). A candidate who reverses the sign of only the x-coordinate, as if reflecting in the y-axis, gets (−5, 2). A candidate who swaps the coordinates instead of reversing their signs gets (2, 5).
- (a) 5 — The symbol ≤ means n can equal 5 or any number less than 5, so 5 is included and is the largest integer value. A candidate who treats the inequality as strict, as if it were n < 5, answers 4. A candidate who confuses ≤ with ≥ and looks for a value just above the boundary answers 6. A candidate who makes a sign error and reads the inequality as n ≤ −5 answers −5.
- (b) s = d / t — Method: undo the multiplication by t by dividing both sides by t. Working: d = st, so dividing both sides by t gives s = d / t. The value s = dt comes from multiplying by t instead of dividing. The value s = t / d comes from inverting the fraction, dividing t by d instead of d by t. The value s = d − t comes from subtracting t instead of dividing by it.
- (a) x = 4, y = −3 — Method: both equations contain +y with the same coefficient, so subtracting one equation from the other removes y. Working: (2x + y) − (x + y) = 5 − 1 gives x = 4; substituting x = 4 into x + y = 1 gives 4 + y = 1, so y = −3. Answer: x = 4, y = −3, which also satisfies 8 − 3 = 5. The distractors: x = 4, y = 5 comes from rearranging x + y = 1 as y = 1 + x; x = −2, y = 3 comes from eliminating x by doubling the first equation and then reading −y = 3 as y = 3; x = 6, y = −5 comes from adding the constants instead of subtracting them while eliminating y, taking x as 5 + 1.
- (b) k − 5 — Method: the width is 5 less than the length, so subtract 5 from the length. Working: length − 5 = k − 5. Answer: k − 5. 5 − k comes from subtracting in the wrong order, taking the length away from 5 instead of the other way round. k + 5 comes from adding instead of subtracting, missing that the width is smaller than the length. 5k comes from multiplying the length by 5 instead of subtracting 5 from it.
- (a) 2 m/s² — Method: acceleration = change in speed ÷ time = (17 − 5) ÷ 6 = 12 ÷ 6 = 2 m/s². Distractor origins: 12 m/s² stops after finding the change in speed and forgets to divide by the time; 22 m/s² adds the two speeds instead of subtracting them, and also forgets to divide by time (5 + 17 = 22); 72 m/s² multiplies the change in speed by the time instead of dividing (12 × 6 = 72).
- (c) 5n + 1 — Method: find the common difference, then use it as the coefficient of n in the position-to-term rule, and find the constant by checking against the first term. Working: the common difference is 5, so the rule has the form 5n + c. Using the 1st term: 5(1) + c = 6, so c = 1. The rule is 5n + 1. Answer: 5n + 1. 5n − 1 uses the correct coefficient but the wrong sign for the constant. 6n comes from using the first term as the coefficient of n instead of the common difference — it matches the 1st term by coincidence but fails from the 2nd term onward. n + 5 swaps the coefficient and the constant around, using the common difference as the constant instead of the coefficient of n.
- (d) −2 — Method: a gradient can only be read off an equation that is written in the form y = mx + c, so y has to be made the subject first. Working: subtracting 2x from both sides of 2x + y = 8 gives y = −2x + 8, and comparing that with y = mx + c gives m = −2. Answer: −2. The distractors: 2 comes from reading the coefficient of x straight off the equation as it is printed, without rearranging, so the change of sign is missed; 8 comes from reading the constant as the gradient, confusing m with c; −1/2 comes from rearranging correctly and then writing the gradient upside down, as the change in x over the change in y.
Build your own mix at the worksheet builder.