Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (b) x = 4 — Method: every point on a vertical line has the same x-coordinate, so its equation sets x equal to a number, and that number is the x-coordinate of any point known to be on the line. Working: the line is vertical and passes through (4, 7), whose x-coordinate is 4, so every point on the line has x-coordinate 4 and the equation is x = 4. Answer: x = 4. The distractors: y = 7 is the horizontal line through the same point, obtained by fixing the y-coordinate instead of the x-coordinate; x = 7 uses the right form but takes the y-coordinate of the point rather than its x-coordinate; y = 4x treats the 4 as a gradient and gives a sloping line through the origin, which does not pass through (4, 7) at all.
- (c) x = 4 — Method: undo the addition of 1 first, then undo the multiplication by 2. Working: subtracting 1 from both sides gives 2x = 8, and dividing both sides by 2 gives x = 4. Answer: x = 4. The distractors: x = 8 comes from stopping at 2x = 8 and writing 8 as the value of x; x = 5 comes from adding 1 to both sides instead of subtracting it, giving 2x = 10; x = 16 comes from multiplying 8 by 2 instead of dividing by 2.
- (a) −7 — The coefficient of xy is the number multiplying that exact term, including its sign: in 4x²y − 7xy + 2, the term in xy is −7xy, so the coefficient is −7. Answering 7 correctly picks out the number but drops the minus sign that belongs to it. Answering 4 picks the coefficient of the x²y term instead of the xy term — x²y and xy are different terms because their powers of x differ. Answering −5 combines −7 with the constant term +2, as though the coefficient of xy included the number with no letter attached to it. The coefficient of xy is −7.
- (a) 55 − 5n — The number of chairs decreases by 5 in each row after the first, so the common difference is d=−5, and the first term is a=50. The nth term is a+(n−1)d = 50+(n−1)(−5) = 50−5n+5 = 55−5n. A candidate who uses the common difference as the constant term instead of correctly finding 55, giving the constant as −5 instead, would write −5n−5. A candidate who uses the first term, 50, as the coefficient of n instead of the common difference, would write 50n−5. A candidate who does not multiply the common difference by n at all, treating the nth term as n+d instead of dn+c, would write n−5.
- (c) y = 3x + 5 — Method: find the gradient from the two points, then substitute one point into y = mx + c to find c. Working: gradient = (14 − 2) ÷ (3 − (−1)) = 12 ÷ 4 = 3. Using the point (3, 14): 14 = 3(3) + c, so 14 = 9 + c, giving c = 5. Answer: y = 3x + 5. y = 6x − 4 comes from mishandling the negative x-coordinate, treating 3 − (−1) as 3 − 1 = 2, so the gradient becomes 12 ÷ 2 = 6, and then c = 14 − 18 = −4. y = 3x + 23 comes from a sign error isolating c, adding 9 to 14 instead of subtracting it: c = 14 + 9 = 23. y = x/3 + 13 comes from dividing the change in x by the change in y instead of the other way round, giving a gradient of 4 ÷ 12 = 1/3, and then c = 14 − 1 = 13.
- (d) $y = x^2 - 2x - 3$ — Method: read the two x-intercepts (roots) from the graph, write the quadratic as the product of the corresponding factors, then expand. Working: the curve crosses the x-axis at x = −1 and x = 3, so the equation factorises as (x + 1)(x − 3), which expands to x² − 2x − 3. Answer: y = x² − 2x − 3. Distractor refutation: y = x² − x − 6 comes from misreading the left-hand crossing point as x = −2 instead of x = −1, giving factors (x + 2)(x − 3). y = x² − x − 2 comes from misreading the right-hand crossing point as x = 2 instead of x = 3, giving factors (x + 1)(x − 2). y = x² + 2x − 3 comes from writing the factors as (x − 1)(x + 3), swapping which root gets the plus sign and which gets the minus sign, giving the wrong sign on the x term.
- (d) The roots of x² − 6x + 5 = 0 are x = 1 and x = 5 (since it factorises to (x − 1)(x − 5)), so by symmetry the turning point has x-coordinate 3, not 6. — Factorising, x² − 6x + 5 = (x − 1)(x − 5), so the roots are x = 1 and x = 5. The turning point lies midway between the roots by symmetry: (1 + 5) ÷ 2 = 3. The coefficient of x has no direct role in locating the turning point this way. The option giving −6 makes an arbitrary sign change with no mathematical basis. The option giving 5 wrongly takes just one of the two roots instead of their midpoint.
- (d) $y = x^2 + 3$ — Method: a point lies on a curve only if substituting its x-coordinate into the equation gives back its y-coordinate, so read one or two points off curve B and test each equation. Working: curve B crosses the y-axis at (0, 3), and its lowest point is also (0, 3); substituting x = 0 into y = x² + 3 gives 0² + 3 = 3, which matches. Checking a second point: at x = 2 curve B is at y = 7, and 2² + 3 = 4 + 3 = 7, which matches as well. Answer: curve B has equation y = x² + 3. Distractor refutation: y = x² − 3 comes from reading the 3 as a move down instead of a move up; substituting x = 0 gives −3, so that curve would cross the y-axis three squares below the origin, while curve B crosses it three squares above. y = (x − 3)² comes from putting the 3 inside the brackets; substituting x = 0 gives (−3)² = 9, and that curve's lowest point is at (3, 0), three squares to the right along the x-axis, whereas curve B has its lowest point on the y-axis. y = x² + 3x comes from attaching the 3 to the x term instead of writing it on its own; substituting x = 0 gives 0² + 3 × 0 = 0, so that curve passes through the origin, and curve B does not pass through the origin.
- (b) 40 — The differences between consecutive terms are 3, 5, 7, 9, increasing by 2 each time, so the next difference is 11, giving 29 + 11 = 40. A candidate who reuses the last difference of 9 without increasing it gets 29 + 9 = 38. A candidate who increases the difference by only 1 instead of 2 gets 29 + 10 = 39. A candidate who reuses the first difference of 3 instead of the pattern gets 29 + 3 = 32.
- (a) 50 — Method: in ab², only the b is squared, so square b first, then multiply by a. Working: b² = 5² = 25, then a × b² = 2 × 25 = 50. Answer: 50. 100 comes from squaring the product ab instead of just b: (2 × 5)² = 100. 20 comes from squaring a instead of b: a² × b = 4 × 5 = 20. 10 comes from ignoring the square altogether and working out a × b = 2 × 5 = 10.
- (a) 2 m/s² — Method: acceleration = change in speed ÷ time = (17 − 5) ÷ 6 = 12 ÷ 6 = 2 m/s². Distractor origins: 12 m/s² stops after finding the change in speed and forgets to divide by the time; 22 m/s² adds the two speeds instead of subtracting them, and also forgets to divide by time (5 + 17 = 22); 72 m/s² multiplies the change in speed by the time instead of dividing (12 × 6 = 72).
- (a) y = 0 — Method: in the pair (x, y) the first coordinate measures how far left or right of the origin a point is and the second how far above or below the x-axis it is, so a point on an axis has one of those measurements equal to zero. Working: the x-axis is the horizontal line through the origin, so a point sitting on it is neither above nor below that line and its second coordinate is zero, while its first coordinate may be positive, negative or zero. Answer: y = 0. The distractors: x = 0 is the condition for lying on the y-axis, the other axis; x > 0 comes from assuming a point on the x-axis must be to the right of the origin, which is true only of part of that axis; x = y holds only at the origin, which is one point of the x-axis rather than a property shared by all of them.
- (d) x = 4 or x = −9 — Since (x − 4)(x + 9) = 0, either x − 4 = 0, giving x = 4, or x + 9 = 0, giving x = −9. A candidate who takes the sign shown in each bracket rather than its opposite gets x = −4 or x = 9. A candidate who makes both solutions negative gets x = −4 or x = −9. A candidate who drops both signs and makes both solutions positive gets x = 4 or x = 9.
- (d) x = 3 — The table is symmetrical about the turning point: y = 0 at both x = 1 and x = 5, and the lowest value, y = −4, occurs exactly halfway between them, at x = 3. Choosing x = 5 picks one of the roots rather than the midpoint between them. Choosing x = 1 picks the other root for the same reason. Choosing x = 6 picks the x-value where y returns to its starting value of 5, which is not the turning point.
- (d) (4, 8) — The other endpoint is found from 2 × midpoint − known endpoint: x = 2 × (−1) − (−6) = −2 + 6 = 4, y = 2 × 5 − 2 = 10 − 2 = 8, giving (4, 8). (−3.5, 3.5) comes from averaging the given endpoint and the midpoint as if they were the two endpoints of a segment, instead of working backwards from the midpoint. (5, 3) comes from working out (−1 − (−6), 5 − 2) instead of doubling the midpoint before subtracting. (4, 5) comes from correctly finding the x-coordinate but copying the midpoint's y-coordinate of 5 instead of doubling it.
Build your own mix at the worksheet builder.