Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (c) r = √(A/π) — A = πr² means r has been squared and then multiplied by π. To make r the subject, first divide both sides by π to get A/π = r², then take the square root of both sides: r = √(A/π). Writing r = A/π stops after dividing by π and forgets that r is still squared — it never undoes the square. Writing r = √A/π takes the square root before dividing by π, which square-roots only the A and not the whole of A/π. Writing r = (A/π)² squares A/π instead of taking its square root — the opposite of what is needed to undo r². The correct rearrangement is r = √(A/π).
- (c) 22 m — Rearranging P = 2l + 2w for l gives l = (P − 2w)/2. Substituting P = 60 and w = 8: l = (60 − 16)/2 = 44/2 = 22 m. Answering 30 m comes from ignoring the width altogether and working out l = P/2, which only holds when w = 0. Answering 38 m comes from adding 2w instead of subtracting it: (60 + 16)/2 = 38. Answering 11 m comes from dividing by 4 instead of 2, as if the formula were P = 4l + 4w. The pen's length is 22 m.
- (b) x = 0 — Method: the first coordinate of a point measures how far to the left or right of the origin it is, so a point that is neither left nor right of the origin has a first coordinate of zero. Working: the y-axis is the vertical line through the origin; every point on it lies directly above or directly below the origin with no sideways movement at all, so its first coordinate is zero while its second coordinate may take any value. Answer: x = 0. The distractors: y = 0 is the condition for lying on the x-axis, the other axis; x = 1 comes from confusing the y-axis with the vertical line one unit to the right of it; x = y is the condition for the diagonal through the origin, which meets the y-axis at the origin only.
- (d) 5n + 4 — Method: find the common difference, then find the constant that fits the first term. Working: 14 − 9 = 5, 19 − 14 = 5, 24 − 19 = 5, so the terms increase by 5 each time and the nth term has the form 5n + c. Substituting n = 1: 5(1) + c = 9, so c = 4. Answer: the nth term is 5n + 4. The value 5n comes from leaving out the constant. The value 5n + 9 comes from using the first term as the constant directly, without subtracting the common difference first. The value 9n + 5 comes from swapping the roles of the first term and the common difference — using the first term, 9, as the coefficient of n and the difference, 5, as the constant.
- (d) (4, 3) — The sides are parallel to the axes: the missing vertex must share the y-coordinate 3 with (−2, 3) and the x-coordinate 4 with (4, −3), giving (4, 3). (−4, 3) comes from a sign error on the x-coordinate. (4, −9) comes from continuing the pattern of the given points by subtracting 6 from the y-coordinate again instead of matching it to (−2, 3). (3, 4) comes from swapping the x- and y-coordinates.
- (d) y = (x + 3)(x − 5) — A root at x = −3 means the matching bracket must be zero when x = −3, so the bracket is (x − (−3)) = (x + 3). A root at x = 5 means the other bracket is (x − 5). So the equation is y = (x + 3)(x − 5); checking the y-intercept, (0 + 3)(0 − 5) = 3 × (−5) = −15, which matches the given value. The option (x − 3)(x + 5) swaps the signs of both roots. The option (x + 3)(x + 5) keeps the correct sign for the first root but gets the second wrong. The option (x − 3)(x − 5) gets the first root's sign wrong.
- (a) 7 — Multiply the input by 2: 6 × 2 = 12. Then subtract 5: 12 − 5 = 7. A candidate who does the operations in the wrong order, subtracting 5 first and then multiplying by 2, gets (6 − 5) × 2 = 2. A candidate who only carries out the multiplication and forgets to subtract gets 12. A candidate who adds 5 instead of subtracting gets 6 × 2 + 5 = 17.
- (c) 71 — Method: square x first, then multiply by 3, then subtract 4, following the order of operations. Working: x² = 5² = 25; 3 × 25 = 75; 75 − 4 = 71. Answer: 71. 221 comes from squaring (3x) as a whole first: (3 × 5)² = 225, then − 4 = 221, squaring the coefficient along with x. 75 comes from correctly working out 3x² but forgetting to subtract the 4. 3 comes from subtracting the 4 from x before squaring: (5 − 4)² × 3 = 3, doing the operations in the wrong order.
- (c) x = 0 — Expand (x + 4)² correctly: (x + 4)² = x² + 8x + 16. This equals x² + 16 only when 8x is zero, i.e. when x = 0 — at every other value of x the two expressions differ by 8x. Choosing x = 4 confuses the constant inside the bracket with the value of x that makes the expressions match. Choosing x = −4 makes the same confusion but with the sign flipped. Choosing x = 8 mistakes the coefficient of the middle term, 8x, for the value of x itself.
- (a) 5 — Method: apply the machine's operation to the input, and treat zero as an input like any other. Working: the machine gives 0 + 5, and counting on 5 from zero leaves the 5 unchanged. Answer: 5. The distractors: 0 comes from assuming that an input of 0 must give an output of 0, which is true for a machine that multiplies but not for one that adds; −5 comes from subtracting 5 instead of adding it; 6 comes from treating the input as 1 rather than 0 and working out 1 + 5.
- (b) x = 8 — Method: undo the addition first, then undo the division by 4. Working: subtracting 1 from both sides gives x/4 = 2, and multiplying both sides by 4 gives x = 8. Answer: x = 8. The distractors: x = 2 comes from stopping at x/4 = 2 and writing 2 as the value of x; x = 16 comes from adding 1 to both sides instead of subtracting it, giving x/4 = 4; x = 0.5 comes from dividing by 4 instead of multiplying by 4 at the last step.
- (d) x = 3 — Method: undo the operations on the left in reverse order — deal with the subtraction of 1 first, then with the multiplication by 3. Working: adding 1 to both sides gives 3x = 9, and dividing both sides by 3 gives x = 3. Answer: x = 3. The distractors: x = 9 comes from stopping at 3x = 9 and writing 9 as the value of x; x = 6 comes from subtracting 3 from 9 instead of dividing by 3; x = 27 comes from multiplying 9 by 3 instead of dividing by 3.
- (a) −5 — Method: apply the machine's operation to the input, and carry the sign of the input through the multiplication. Working: the machine gives 5 × (−1); a positive number multiplied by a negative number gives a negative result, and 5 × 1 = 5, so the output is 5 below zero. Answer: −5, which is one lot of −1 taken five times. The distractors: 5 comes from working out 5 × 1 and losing the minus sign of the input; 4 comes from adding 5 to −1 instead of multiplying; −6 comes from subtracting 5 from −1 instead of multiplying.
- (a) 3.5 km/h — Average speed is total distance ÷ total time. Total distance = 5 + 9 = 14 km. Total time, including the rest, = 1 + 1 + 2 = 4 hours. So average speed = 14 ÷ 4 = 3.5 km/h. Leaving out the 1 hour rest and dividing by only the 3 hours of walking gives 14 ÷ 3 = 4.67 km/h. Averaging the two separate speeds, 5 km/h and 4.5 km/h, instead of using total distance over total time, gives (5 + 4.5) ÷ 2 = 4.75 km/h. Dividing only the second leg's distance by the total time, 9 ÷ 4 = 2.25 km/h, ignores the first leg's distance.
- (d) h = 2A / (a + b) — Method: undo the multiplication by 1/2 by multiplying both sides by 2, then undo the multiplication by (a + b) by dividing both sides by it. Working: A = (a + b)h / 2, so multiplying both sides by 2 gives 2A = (a + b)h, then dividing both sides by (a + b) gives h = 2A / (a + b). The value h = A / (a + b) comes from forgetting to multiply by 2 to clear the 1/2 first. The value h = 2A / a + b comes from dividing only by a and leaving b outside the fraction, instead of dividing by the whole bracket (a + b). The value h = (a + b) / (2A) comes from inverting the fraction.
Build your own mix at the worksheet builder.