Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (b) p = 3n — n = p/3 means p has been divided by 3, so to make p the subject, multiply both sides by 3: p = 3n. Writing p = n/3 leaves the formula exactly as it was, without undoing the division. Writing p = n − 3 mistakes division for subtraction and takes 3 away from n instead of multiplying. Writing p = 3/n incorrectly flips the fraction upside down rather than multiplying n by 3. The correct rearrangement is p = 3n.
- (b) the first and the third — Method: the sign of a product depends only on the signs of the two numbers multiplied: like signs give a positive product and unlike signs a negative one, so look for the quadrants in which both coordinates carry the same sign. Working: in the first quadrant x and y are both positive, and positive times positive is positive; in the third quadrant both are negative, and negative times negative is positive as well; in the second quadrant x is negative while y is positive, and in the fourth x is positive while y is negative, so each of those gives a negative product. Answer: the first and the third. The distractors: 'the second and the fourth' comes from applying the rule for a NEGATIVE product, unlike signs, to a positive one; 'the first and the second' comes from testing only the y-coordinate and keeping the quadrants where the height is positive; 'the first and the fourth' comes from testing only the x-coordinate in the same way.
- (a) y = −2x − 1 — Method: the gradient is the change in y divided by the change in x with both differences taken in the same order, and the constant then comes from substituting either point into y = mx + c. Working: m = (−9 − 3) ÷ (4 − (−2)) = (−12) ÷ 6 = −2, so the line is y = −2x + c; substituting (−2, 3) gives 3 = −2 × (−2) + c = 4 + c, so c = 3 − 4 = −1. Answer: y = −2x − 1. The distractors: y = −2x + 1 comes from rearranging 3 = 4 + c the wrong way round and taking the constant as 4 − 3; y = 2x + 7 comes from losing the minus sign when −12 is divided by 6 and then substituting correctly, 3 = 2 × (−2) + c; y = −(1/2)x + 2 comes from writing the gradient upside down as the change in x over the change in y, 6 ÷ (−12).
- (d) 5 — Method: rearrange the formula to make m the subject, then substitute F = 15.50. Working: F = 3 + 2.5m, so subtracting 3 from both sides gives F − 3 = 2.5m, then dividing by 2.5 gives m = (F − 3) / 2.5. Substituting F = 15.50: m = (15.50 − 3) / 2.5 = 12.50 / 2.5 = 5. The value 6.2 comes from dividing 15.50 by 2.5 without subtracting the fixed £3 first. The value 3.2 comes from dividing first and subtracting afterwards, in the wrong order: (15.50 / 2.5) − 3 = 3.2. The value 7.4 comes from adding £3 instead of subtracting it before dividing: (15.50 + 3) / 2.5 = 7.4.
- (d) 4 — Subtracting the second equation from the first: the y-terms cancel, and the x-terms combine as 3x − x = 2x; the right-hand sides give 14 − 6 = 8. This gives 2x = 8, so x = 4. A candidate who subtracts in the wrong order would get 2x = 6 − 14 = −8, so x = −4. A candidate who uses only the first equation, dividing 14 by 3 as if y were 0, would get x ≈ 4.67. A candidate who reports the value of y instead of x would get y = 6 − 4 = 2.
- (c) 2x + 12 — Multiply every term inside the bracket by 2: 2 × x = 2x and 2 × 6 = 12, so 2(x + 6) = 2x + 12. Writing 2x + 6 comes from multiplying only the x-term and leaving the 6 unchanged. Writing x + 12 comes from multiplying only the 6 and leaving the x unchanged. Writing 2x + 8 comes from adding 2 and 6 instead of multiplying them.
- (a) 2 m/s² — Method: acceleration = change in speed ÷ time = (17 − 5) ÷ 6 = 12 ÷ 6 = 2 m/s². Distractor origins: 12 m/s² stops after finding the change in speed and forgets to divide by the time; 22 m/s² adds the two speeds instead of subtracting them, and also forgets to divide by time (5 + 17 = 22); 72 m/s² multiplies the change in speed by the time instead of dividing (12 × 6 = 72).
- (a) 5 — Method: apply the machine's operation to the input, and treat zero as an input like any other. Working: the machine gives 0 + 5, and counting on 5 from zero leaves the 5 unchanged. Answer: 5. The distractors: 0 comes from assuming that an input of 0 must give an output of 0, which is true for a machine that multiplies but not for one that adds; −5 comes from subtracting 5 instead of adding it; 6 comes from treating the input as 1 rather than 0 and working out 1 + 5.
- (a) 9 m — Undo the multiplication by the bracket first: dividing both sides by 2 gives P/2 = l + w. Subtracting the length from both sides gives w = P/2 − l. Substituting the measurements, 46 ÷ 2 = 23, and 23 − 14 = 9, so the width is 9 m. Taking the length off before halving gives (46 − 14) ÷ 2 = 16, which halves the length as well; expanding to P = 2l + 2w and then forgetting to divide by 2 gives 46 − 28 = 18; subtracting the length in the wrong direction gives 23 + 14 = 37.
- (c) a³ — a × a × a means a multiplied by itself three times, which is written using powers as a³ — the small 3 shows how many times a is multiplied by itself. Writing 3a instead uses the 3 as a coefficient, as if the expression meant a + a + a (three lots of a added together) rather than three a's multiplied together. Writing a² only accounts for two of the three a's being multiplied together, missing one factor. Writing 3 + a treats the repeated multiplication as an addition of 3 and a, which has no connection to the original expression. The expression that means a × a × a is a³.
- (d) the y-axis, and 12 — Method: coordinates are written (x, y), so the first number is the distance across and the second the distance up; a point whose first coordinate is 0 has not moved across from the origin and therefore lies on the vertical axis. Working: in (0, 12) the first number is 0, so P is on the y-axis, and the second number, 12, is the y-coordinate of P. Answer: the y-axis, and 12. The distractors: 'the x-axis, and 12' comes from mixing up which axis the condition 'the first coordinate is 0' describes; 'the y-axis, and 0' comes from placing P correctly but reading the pair the wrong way round, so that the first number is quoted as the y-coordinate; 'the x-axis, and 0' comes from making both of those mistakes at once.
- (c) the fourth quadrant — Method: read the sign of each coordinate in turn, then count round the regions, which are numbered anticlockwise from the one where both coordinates are positive. Working: the x-coordinate 5 is positive, so A is to the right of the y-axis; the y-coordinate −3 is negative, so A is below the x-axis; right of the y-axis and below the x-axis is the fourth of the four regions. Answer: the fourth quadrant. The distractors: 'the first quadrant' comes from ignoring the minus sign on the y-coordinate and treating the point as (5, 3); 'the second quadrant' comes from writing the pair the wrong way round and locating (−3, 5) instead; 'the third quadrant' comes from assuming that any point with a negative coordinate belongs to the region where the minus signs are, without checking the other coordinate.
- (a) 36 km/h — Speed is distance ÷ time. Convert 25 minutes to hours: 25 ÷ 60 = 5/12 hours. Then 15 ÷ (5/12) = 15 × 12/5 = 36 km/h. Dividing 15 by 25 without converting minutes to hours gives 0.6 km/h. Multiplying 15 by 25/60 instead of dividing by it gives 6.25 km/h. Working out the speed in km per minute, 0.6, and then multiplying by 24 instead of 60 gives 14.4 km/h.
- (c) 37 — The first differences are 3, 5, 7, 9 — they increase by 2 each time (the second difference), so the next first difference is 11, giving 26+11=37. A candidate who repeats the last first difference (9) instead of increasing it would reach 26+9=35. A candidate who increases the difference by 4 instead of 2 would reach 26+13=39. A candidate who adds only the second difference (2) to the last term, instead of the next first difference, would reach 26+2=28.
- (c) 7n − 1 — Method: find the common difference, then find the constant that fits the first term. Working: 13 − 6 = 7, 20 − 13 = 7, 27 − 20 = 7, so the terms increase by 7 each time and the nth term has the form 7n + c. Substituting n = 1: 7(1) + c = 6, so c = −1. Answer: the nth term is 7n − 1. The value 7n comes from leaving out the constant altogether. The value 7n + 6 comes from using the first term as the constant directly, without subtracting the common difference first. The value 6n + 1 comes from using the first term, 6, as the coefficient of n instead of the common difference, and then attaching +1 with the sign of the constant flipped.
Build your own mix at the worksheet builder.