Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (b) x ≥ 5 — Expand the bracket: 2(3x − 1) = 6x − 2, so the inequality is 6x − 2 ≥ 4x + 8. Subtract 4x from both sides and add 2 to both sides: 2x ≥ 10. Divide both sides by 2: x ≥ 5. A candidate who only multiplies the 3x by 2 and forgets to multiply the −1 gets 6x − 1 ≥ 4x + 8, leading to x ≥ 4.5. A candidate who adds 4x instead of subtracting it gets 10x ≥ 10, leading to x ≥ 1. A candidate who multiplies by 2 instead of dividing gets x ≥ 20.
- (c) Second and fourth — If x + y = 0 then y = −x, so x and y always have opposite signs, one positive and one negative. A point with a negative x and a positive y lies in the second quadrant, and a point with a positive x and a negative y lies in the fourth quadrant, so the point lies in the second or the fourth. A candidate who reads x + y = 0 as meaning x and y have the same sign picks First and third, which is where x × y is positive, not where x + y = 0. A candidate who decides that y must be the positive coordinate picks the two quadrants above the x-axis, First and second. A candidate who decides that y must be the negative coordinate picks the two quadrants below the x-axis, Third and fourth.
- (a) It touches the x-axis once, only at x = 4. — (x − 4)² is a square, so it equals zero only when x − 4 = 0, that is at x = 4 — the curve just touches the x-axis there rather than crossing it, since a square cannot be negative on either side to cross through. Saying it crosses at x = 4 and x = −4 wrongly introduces a plus-or-minus, as if taking a square root of x, rather than recognising the bracket is already squared and only zero once. Saying it never touches the x-axis forgets that a squared term CAN equal zero, even though it can never be negative. Saying it crosses at x = 2 and x = −2 confuses (x − 4)² with the different expression x² − 4.
- (d) 5 — Method: rearrange the formula to make m the subject, then substitute F = 15.50. Working: F = 3 + 2.5m, so subtracting 3 from both sides gives F − 3 = 2.5m, then dividing by 2.5 gives m = (F − 3) / 2.5. Substituting F = 15.50: m = (15.50 − 3) / 2.5 = 12.50 / 2.5 = 5. The value 6.2 comes from dividing 15.50 by 2.5 without subtracting the fixed £3 first. The value 3.2 comes from dividing first and subtracting afterwards, in the wrong order: (15.50 / 2.5) − 3 = 3.2. The value 7.4 comes from adding £3 instead of subtracting it before dividing: (15.50 + 3) / 2.5 = 7.4.
- (b) (−1, 6) — '6 units above the x-axis' gives a y-coordinate of 6, and the x-coordinate is given as −1, so F = (−1, 6). (6, −1) comes from swapping the x- and y-coordinates. (−1, −6) comes from treating 'above' as a negative direction instead of positive. (1, 6) comes from dropping the negative sign on the given x-coordinate.
- (c) 70 — Method: the numbers of tiles form a sequence in which the same amount is added for each extra row, so the total for a number of rows is that amount multiplied by the number of rows. Working: 20 − 10 = 10 and 30 − 20 = 10, so each row adds 10 tiles; 7 rows therefore need 7 lots of 10, that is 7 × 10. Answer: 70. The distractors: 80 comes from counting one row too many and giving the total for 8 rows; 17 comes from adding the 10 tiles to the 7 rows instead of multiplying; 10 comes from giving the number of tiles in a single row rather than the total for all the rows.
- (c) (3, 9) — Reflecting in the horizontal line y = 2 keeps the x-coordinate the same and maps y to 2 × 2 − y = 4 − (−5) = 9, so S = (3, 9). A candidate who uses k − y instead of 2k − y gets 2 − (−5) = 7, giving (3, 7). A candidate who reflects in the x-axis instead of the line y = 2, simply changing the sign of y, gets (3, 5). A candidate who also changes the sign of the x-coordinate, as if reflecting in both axes, gets (−3, 9).
- (c) h = V / (lw) — Method: undo the multiplication by lw by dividing both sides by lw. Working: V = lwh, so dividing both sides by lw gives h = V / (lw). The value h = V − lw comes from subtracting lw instead of dividing by it. The value h = Vlw comes from multiplying by lw instead of dividing. The value h = lw / V comes from inverting the fraction, dividing lw by V instead of V by lw.
- (d) x = 1 — A quadratic graph is symmetrical about its turning point, so the turning point's x-coordinate is the midpoint of the two roots: (−2 + 4) ÷ 2 = 2 ÷ 2 = 1. The option x = 2 comes from adding the two roots but forgetting to divide by 2. The option x = −1 makes a sign error when adding the roots, treating −2 + 4 as −2. The option x = 3 comes from subtracting the roots instead of adding them: (4 − (−2)) ÷ 2 = 3.
- (c) Yes; x = (y + 5)/2 is right — Sam's method is correct throughout: adding 5 to both sides gives y + 5 = 2x, and dividing both sides by 2 gives x = (y + 5)/2, so Sam is right. The option giving x = (y − 5)/2 assumes 5 should be subtracted again, but 2x − 5 = y means 5 has already been subtracted, so it must be added back, not taken away a second time. The option giving x = y/2 + 5 divides only the y term by 2 and leaves the 5 unhalved, which is not a valid rearrangement. The option agreeing Sam is correct but changing step 2 to x = 2(y + 5) confuses '2x' with 'x divided by 2' — since x is multiplied by 2, the inverse is division, not multiplication. Sam's working, and his final formula x = (y + 5)/2, are both correct.
- (c) 5x² — A term is one part of an expression, separated from the others by a + or − sign. The expression 5x² − 3x + 7 has three terms: 5x², −3x and 7. Distractor origins: 5x² − 3x combines two terms together, not a single term; −3x + 7 also combines two terms together; 5x² − 3x + 7 gives the whole expression, not a single term.
- (d) x = 2 or x = −5 — Method: find two numbers that multiply to give −10 and add to give 3 — these are 5 and −2. So x² + 3x − 10 = (x + 5)(x − 2) = 0, giving x = −5 or x = 2. Distractor origins: x = −2 or x = 5 swaps the signs of the two roots; x = 2 or x = 5 makes both roots positive, ignoring the sign of −10; x = −5 or x = −2 makes both roots negative.
- (a) x + 3 — Method: "years older" is an addition, and the number of years is added to the age that is known in terms of the letter. Working: Jack's age is x, and Kwame is 3 years older, so Kwame's age is x + 3. Answer: x + 3. The distractors: x − 3 comes from reading "older" as "younger" and subtracting instead of adding; 3x comes from reading "3 years older" as "3 times as old" and multiplying; 3 − x comes from writing the calculation the wrong way round, taking Jack's age from the 3 rather than adding.
- (d) 6 — Method: rearrange the formula to make d the subject, then substitute C = 133. Working: C = 25 + 18d, so subtracting 25 from both sides gives C − 25 = 18d, then dividing by 18 gives d = (C − 25) / 18. Substituting C = 133: d = (133 − 25) / 18 = 108 / 18 = 6. The value 7.4 comes from dividing 133 by 18 without subtracting the fixed £25 first (133 / 18 ≈ 7.4). The value 4.6 comes from pairing the numbers the wrong way round, working out (133 − 18) / 25 = 4.6. The value 90 comes from subtracting both 25 and 18 from 133 instead of dividing by 18.
- (b) y = 7 — Method: one of the equations already gives the value of x, so that value is substituted into the other equation. Working: replacing x with 2 in x + y = 9 gives 2 + y = 9, so y = 9 − 2 = 7. Answer: y = 7, and the pair x = 2 with y = 7 satisfies both equations. The distractors: y = 11 comes from rearranging x + y = 9 as y = 9 + x and adding instead of subtracting; y = 9 comes from ignoring the x term and reading the total as the value of y; y = 4.5 comes from halving 9, as though x and y had to be equal.
Build your own mix at the worksheet builder.